Commit d9f16568 authored by blogic's avatar blogic

ramips: Add support for Omnima MiniPlug

This patch adds support for the Omnima MiniPlug RT5350 based board, 8MB SPI flash

Signed-off-by: Ivan Ignjatic<ivan@omnima.co.uk>

Backport of r42200

git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42370 3c298f89-4303-0410-b956-a3cf2f4a3e73
parent 19961bb6
......@@ -140,6 +140,10 @@ case $board in
ucidef_set_led_netdev "eth" "ETH" "emb:green:eth" "eth0"
set_wifi_led "emb:green:wifi"
;;
omni-plug)
set_wifi_led "miniplug:green:wlan"
set_usb_led "miniplug:green:mobile"
;;
px4885)
set_wifi_led "7links:orange:wifi"
set_usb_led "7links:blue:storage"
......
......@@ -184,6 +184,9 @@ ramips_board_detect() {
*"Omnima MiniEMBWiFi")
name="omni-emb"
;;
*"Omnima MiniPlug")
name="omni-plug"
;;
*"Petatel PSR-680W"*)
name="psr-680w"
;;
......
......@@ -64,6 +64,7 @@ platform_check_image() {
nw718 | \
omni-emb | \
omni-emb-hpm | \
omni-plug | \
psr-680w | \
px4885 | \
rp-n53 | \
......
/dts-v1/;
/include/ "rt5350.dtsi"
/ {
compatible = "OMNI-PLUG", "ralink,rt5350-soc";
model = "Omnima MiniPlug";
pinctrl {
state_default: pinctrl0 {
gpio {
ralink,group = "i2c", "jtag", "uartf";
ralink,function = "gpio";
};
};
};
gpio-leds {
compatible = "gpio-leds";
wlan {
label = "miniplug:red:wlan";
gpios = <&gpio0 9 0>;
};
mobile {
label = "miniplug:green:mobile";
gpios = <&gpio0 13 1>;
};
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <20>;
wps {
label = "wps";
gpios = <&gpio0 0 1>;
linux,code = <0x211>;
};
reset {
label = "reset";
gpios = <&gpio0 10 1>;
linux,code = <0x211>;
};
mode-one {
label = "mode1";
gpios = <&gpio0 11 1>;
linux,code = <0x211>;
};
mode-two {
label = "mode2";
gpios = <&gpio0 12 1>;
linux,code = <0x211>;
};
};
palmbus@10000000 {
gpio0: gpio@600 {
status = "okay";
};
spi@b00 {
status = "okay";
m25p80@0 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "mx25l6405d";
reg = <0 0>;
linux,modalias = "m25p80", "mx25l6405d";
spi-max-frequency = <10000000>;
partition@0 {
label = "u-boot";
reg = <0x0 0x30000>;
read-only;
};
partition@30000 {
label = "u-boot-env";
reg = <0x30000 0x10000>;
read-only;
};
factory: partition@40000 {
label = "factory";
reg = <0x40000 0x10000>;
read-only;
};
partition@50000 {
label = "firmware";
reg = <0x50000 0x7b0000>;
};
};
};
};
ethernet@10100000 {
mtd-mac-address = <&factory 0x4>;
};
esw@10110000 {
ralink,portmap = <0x2f>;
};
wmac@10180000 {
ralink,mtd-eeprom = <&factory 0>;
};
otg@101c0000 {
status = "okay";
};
};
......@@ -458,6 +458,8 @@ Image/Build/Profile/NW718=$(call BuildFirmware/CustomFlashFactory/$(1),$(1),nw71
Image/Build/Profile/OMNI-EMB=$(call BuildFirmware/Default8M/$(1),$(1),omni-emb,OMNI-EMB)
Image/Build/Profile/OMNI-PLUG=$(call BuildFirmware/Default8M/$(1),$(1),omni-plug,OMNI-PLUG)
Image/Build/Profile/PSR-680W=$(call BuildFirmware/Default4M/$(1),$(1),psr-680w,PSR-680W)
Image/Build/Profile/PWH2004=$(call BuildFirmware/Default8M/$(1),$(1),pwh2004,PWH2004)
......@@ -604,6 +606,7 @@ define Image/Build/Profile/Default
$(call Image/Build/Profile/NCS601W,$(1))
$(call Image/Build/Profile/NW718,$(1))
$(call Image/Build/Profile/OMNI-EMB,$(1))
$(call Image/Build/Profile/OMNI-PLUG,$(1))
$(call Image/Build/Profile/PSR-680W,$(1))
$(call Image/Build/Profile/PWH2004,$(1))
$(call Image/Build/Profile/PX4885,$(1))
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment