1. 03 Nov, 2014 3 commits
  2. 31 Oct, 2014 1 commit
  3. 30 Oct, 2014 1 commit
  4. 29 Oct, 2014 1 commit
  5. 26 Oct, 2014 3 commits
  6. 20 Oct, 2014 1 commit
  7. 18 Oct, 2014 1 commit
  8. 14 Oct, 2014 8 commits
  9. 08 Oct, 2014 3 commits
  10. 06 Oct, 2014 1 commit
  11. 27 Sep, 2014 1 commit
  12. 17 Sep, 2014 2 commits
  13. 16 Sep, 2014 2 commits
  14. 11 Sep, 2014 1 commit
  15. 10 Sep, 2014 1 commit
  16. 08 Sep, 2014 1 commit
  17. 07 Sep, 2014 2 commits
    • nbd's avatar
      ath79: dev-eth: Don't advertise 1gbit in link code word on ar9331 · a2a0b9f4
      nbd authored
      While the AR9331 has a gigabit MAC towards the internal switch, the
      integrated PHYs however are only 100-base-tx capable.  The existing code
      however advertieses gigabit capability in the link status word.  If you
      attach such a PHY to a gigabit capable switch on the remote end, with
      some probability it attempts to negotiate gigabit and fails, falling
      baco to the AR9331 assuming a 10mbit half-duplex link.  This has been
      observed quite frequently with the Carambola2 and gigabit capable
      switches.
      
      In ath79_register_eth(), "pdata->has_gbit = 1;" is set unconditionally
      for both AR9331 ethernet ports. This is most likely wrong. Despite the
      two MAC IP cores being gigabit MACs, the MAC for eth1 is connected to a
      100base-T PHY via MII. The has_gbit attribute is used in the ethernet
      driver to determine the supported link modes.
      
      So either pdata->has_gbit is not set to 1 anymore, or the ethernet
      driver needs to be modified to determine the advertised link code word
      on another criteria than pdata->has_gbit.  This patch implements the
      former solution.
      Signed-off-by: default avatarHarald Welte <laforge@gnumonks.org>
      
      Backport of r42432
      
      git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42434 3c298f89-4303-0410-b956-a3cf2f4a3e73
      a2a0b9f4
    • nbd's avatar
      ar71xx: merge ethernet tx descriptor splitting from trunk (as of r42429) to... · 50018ded
      nbd authored
      ar71xx: merge ethernet tx descriptor splitting from trunk (as of r42429) to fix ar716x performance issues
      Signed-off-by: default avatarFelix Fietkau <nbd@openwrt.org>
      
      git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42433 3c298f89-4303-0410-b956-a3cf2f4a3e73
      50018ded
  18. 02 Sep, 2014 2 commits
  19. 01 Sep, 2014 5 commits