package/kernel/mac80211/patches/609-rt2x00-allow_disabling_bands_through_dts.patch

+--- a/drivers/net/wireless/rt2x00/rt2x00dev.c
++++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
+@@ -26,6 +26,7 @@
+ #include <linux/module.h>
+ #include <linux/slab.h>
+ #include <linux/log2.h>
++#include <linux/of.h>
+ 
+ #include "rt2x00.h"
+ #include "rt2x00lib.h"
+@@ -951,6 +952,16 @@ static int rt2x00lib_probe_hw_modes(stru
+ 	struct ieee80211_rate *rates;
+ 	unsigned int num_rates;
+ 	unsigned int i;
++#ifdef CONFIG_OF
++	struct device_node *np = rt2x00dev->dev->of_node;
++	unsigned int enabled;
++	if (!of_property_read_u32(np, "ralink,2ghz",
++                                          &enabled) && !enabled)
++		spec->supported_bands &= ~SUPPORT_BAND_2GHZ;
++	if (!of_property_read_u32(np, "ralink,5ghz",
++                                          &enabled) && !enabled)
++		spec->supported_bands &= ~SUPPORT_BAND_5GHZ;
++#endif /* CONFIG_OF */
+ 
+ 	if (rt2x00dev->dev->platform_data) {
+ 		struct rt2x00_platform_data *pdata;

package/kernel/mac80211/patches/620-rt2x00-add-AP+STA-support.patch

 --- a/drivers/net/wireless/rt2x00/rt2x00dev.c
 +++ b/drivers/net/wireless/rt2x00/rt2x00dev.c
-@@ -1265,7 +1265,7 @@ static inline void rt2x00lib_set_if_comb
+@@ -1276,7 +1276,7 @@ static inline void rt2x00lib_set_if_comb
  	 */
  	if_limit = &rt2x00dev->if_limits_ap;
  	if_limit->max = rt2x00dev->ops->max_ap_intf;

package/kernel/mac80211/patches/621-rt2x00-ht20_40_fix.patch

+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -2319,6 +2319,8 @@ struct mac_iveiv_entry {
+ #define RFCSR30_RX_H20M			FIELD8(0x04)
+ #define RFCSR30_RX_VCM			FIELD8(0x18)
+ #define RFCSR30_RF_CALIBRATION		FIELD8(0x80)
++#define RF3322_RFCSR30_TX_H20M		FIELD8(0x01)
++#define RF3322_RFCSR30_RX_H20M		FIELD8(0x02)
+ 
+ /*
+  * RFCSR 31:
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -3549,8 +3549,13 @@ static void rt2800_config_channel(struct
+ 	    rt2x00_rf(rt2x00dev, RF5390) ||
+ 	    rt2x00_rf(rt2x00dev, RF5392)) {
+ 		rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr);
+-		rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, 0);
+-		rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, 0);
++		if(rt2x00_rf(rt2x00dev, RF3322)) {
++			rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_TX_H20M, conf_is_ht40(conf));
++			rt2x00_set_field8(&rfcsr, RF3322_RFCSR30_RX_H20M, conf_is_ht40(conf));
++		} else {
++			rt2x00_set_field8(&rfcsr, RFCSR30_TX_H20M, conf_is_ht40(conf));
++			rt2x00_set_field8(&rfcsr, RFCSR30_RX_H20M, conf_is_ht40(conf));
++		}
+ 		rt2800_rfcsr_write(rt2x00dev, 30, rfcsr);
+ 
+ 		rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr);

package/kernel/mac80211/patches/801-fix-5ghz.patch

+--- a/drivers/net/wireless/b43/phy_n.c
++++ b/drivers/net/wireless/b43/phy_n.c
+@@ -6217,6 +6217,9 @@ static void b43_nphy_channel_setup(struc
+ 	u16 tmp16;
+ 
+ 	if (new_channel->band == IEEE80211_BAND_5GHZ) {
++		/* Switch to 2 GHz for a moment to access B43_PHY_B_BBCFG */
++		b43_phy_mask(dev, B43_NPHY_BANDCTL, ~B43_NPHY_BANDCTL_5GHZ);
++
+ 		tmp16 = b43_read16(dev, B43_MMIO_PSM_PHY_HDR);
+ 		b43_write16(dev, B43_MMIO_PSM_PHY_HDR, tmp16 | 4);
+ 		/* Put BPHY in the reset */

package/kernel/mac80211/patches/805-b43-gpio-mask-module-option.patch

@@ -22,7 +22,7 @@
  static int modparam_bad_frames_preempt;
  module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444);
  MODULE_PARM_DESC(bad_frames_preempt,
-@@ -2798,10 +2803,10 @@ static int b43_gpio_init(struct b43_wlde
+@@ -2814,10 +2819,10 @@ static int b43_gpio_init(struct b43_wlde
  	u32 mask, set;
  
  	b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0);

package/kernel/mac80211/patches/810-b43_no_pio.patch

@@ -11,7 +11,7 @@
  b43-$(CPTCFG_B43_PCMCIA)	+= pcmcia.o
 --- a/drivers/net/wireless/b43/main.c
 +++ b/drivers/net/wireless/b43/main.c
-@@ -1924,10 +1924,12 @@ static void b43_do_interrupt_thread(stru
+@@ -1940,10 +1940,12 @@ static void b43_do_interrupt_thread(stru
  			dma_reason[0], dma_reason[1],
  			dma_reason[2], dma_reason[3],
  			dma_reason[4], dma_reason[5]);

package/kernel/mac80211/patches/820-b43-add-antenna-control.patch

 --- a/drivers/net/wireless/b43/main.c
 +++ b/drivers/net/wireless/b43/main.c
-@@ -1571,7 +1571,7 @@ static void b43_write_beacon_template(st
+@@ -1587,7 +1587,7 @@ static void b43_write_beacon_template(st
  				  len, ram_offset, shm_size_offset, rate);
  
  	/* Write the PHY TX control parameters. */
@@ -9,7 +9,7 @@
  	antenna = b43_antenna_to_phyctl(antenna);
  	ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL);
  	/* We can't send beacons with short preamble. Would get PHY errors. */
-@@ -3201,8 +3201,8 @@ static int b43_chip_init(struct b43_wlde
+@@ -3218,8 +3218,8 @@ static int b43_chip_init(struct b43_wlde
  
  	/* Select the antennae */
  	if (phy->ops->set_rx_antenna)
@@ -20,7 +20,7 @@
  
  	if (phy->type == B43_PHYTYPE_B) {
  		value16 = b43_read16(dev, 0x005E);
-@@ -3896,7 +3896,6 @@ static int b43_op_config(struct ieee8021
+@@ -3913,7 +3913,6 @@ static int b43_op_config(struct ieee8021
  	struct b43_wldev *dev = wl->current_dev;
  	struct b43_phy *phy = &dev->phy;
  	struct ieee80211_conf *conf = &hw->conf;
@@ -28,7 +28,7 @@
  	int err = 0;
  
  	mutex_lock(&wl->mutex);
-@@ -3936,11 +3935,9 @@ static int b43_op_config(struct ieee8021
+@@ -3953,11 +3952,9 @@ static int b43_op_config(struct ieee8021
  	}
  
  	/* Antennas for RX and management frame TX. */
@@ -42,7 +42,7 @@
  
  	if (wl->radio_enabled != phy->radio_on) {
  		if (wl->radio_enabled) {
-@@ -5077,6 +5074,47 @@ static int b43_op_get_survey(struct ieee
+@@ -5094,6 +5091,47 @@ static int b43_op_get_survey(struct ieee
  	return 0;
  }
  
@@ -90,7 +90,7 @@
  static const struct ieee80211_ops b43_hw_ops = {
  	.tx			= b43_op_tx,
  	.conf_tx		= b43_op_conf_tx,
-@@ -5098,6 +5136,8 @@ static const struct ieee80211_ops b43_hw
+@@ -5115,6 +5153,8 @@ static const struct ieee80211_ops b43_hw
  	.sw_scan_complete	= b43_op_sw_scan_complete_notifier,
  	.get_survey		= b43_op_get_survey,
  	.rfkill_poll		= b43_rfkill_poll,
@@ -99,7 +99,7 @@
  };
  
  /* Hard-reset the chip. Do not call this directly.
-@@ -5397,6 +5437,8 @@ static int b43_one_core_attach(struct b4
+@@ -5418,6 +5458,8 @@ static int b43_one_core_attach(struct b4
  	if (!wldev)
  		goto out;
  
@@ -108,7 +108,7 @@
  	wldev->use_pio = b43_modparam_pio;
  	wldev->dev = dev;
  	wldev->wl = wl;
-@@ -5487,6 +5529,9 @@ static struct b43_wl *b43_wireless_init(
+@@ -5508,6 +5550,9 @@ static struct b43_wl *b43_wireless_init(
  
  	hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN;
  

package/kernel/mac80211/patches/830-b43-workaround-pcie-bcm4716.patch

@@ -19,28 +19,12 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/drivers/net/wireless/b43/b43.h
 +++ b/drivers/net/wireless/b43/b43.h
-@@ -1054,6 +1054,31 @@ static inline bool b43_using_pio_transfe
+@@ -1054,6 +1054,15 @@ static inline bool b43_using_pio_transfe
  	return dev->__using_pio_transfers;
  }
  
-+/*
-+ * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
-+ * transactions. As a fix, a read after write is performed on certain places
-+ * in the code. Older chips and the newer 5357 family don't require this fix.
-+ */
 +#ifdef CONFIG_BCM47XX_BCMA
-+#include <asm/mach-bcm47xx/bcm47xx.h>
-+static inline void b43_wflush16(struct b43_wldev *dev, u16 offset, u16 value)
-+{
-+	if (b43_bus_host_is_pci(dev->dev) &&
-+	    bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA &&
-+	    bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4716) {
-+		b43_write16(dev, offset, value);
-+		b43_read16(dev, offset);
-+	} else {
-+		b43_write16(dev, offset, value);
-+	}
-+}
++void b43_wflush16(struct b43_wldev *dev, u16 offset, u16 value);
 +#else
 +static inline void b43_wflush16(struct b43_wldev *dev, u16 offset, u16 value)
 +{
@@ -74,7 +58,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  struct b43_bus_dev *b43_bus_dev_ssb_init(struct ssb_device *sdev);
 --- a/drivers/net/wireless/b43/main.c
 +++ b/drivers/net/wireless/b43/main.c
-@@ -4464,7 +4464,7 @@ static int b43_phy_versioning(struct b43
+@@ -4481,7 +4481,7 @@ static int b43_phy_versioning(struct b43
  		u16 radio24[3];
  
  		for (tmp = 0; tmp < 3; tmp++) {
@@ -83,7 +67,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  			radio24[tmp] = b43_read16(dev, B43_MMIO_RADIO24_DATA);
  		}
  
-@@ -4481,10 +4481,10 @@ static int b43_phy_versioning(struct b43
+@@ -4498,10 +4498,10 @@ static int b43_phy_versioning(struct b43
  			else
  				tmp = 0x5205017F;
  		} else {
@@ -96,6 +80,33 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  				    B43_RADIOCTL_ID);
  			tmp |= (u32)b43_read16(dev, B43_MMIO_RADIO_DATA_HIGH)
  				<< 16;
+@@ -4576,6 +4576,26 @@ static int b43_phy_versioning(struct b43
+ 	return 0;
+ }
+ 
++/*
++ * bcm4716 (which includes 4717 & 4718), plus 4706 on PCIe can reorder
++ * transactions. As a fix, a read after write is performed on certain places
++ * in the code. Older chips and the newer 5357 family don't require this fix.
++ */
++#ifdef CONFIG_BCM47XX_BCMA
++#include <asm/mach-bcm47xx/bcm47xx.h>
++void b43_wflush16(struct b43_wldev *dev, u16 offset, u16 value)
++{
++	if (b43_bus_host_is_pci(dev->dev) &&
++	    bcm47xx_bus_type == BCM47XX_BUS_TYPE_BCMA &&
++	    bcm47xx_bus.bcma.bus.chipinfo.id == BCMA_CHIP_ID_BCM4716) {
++		b43_write16(dev, offset, value);
++		b43_read16(dev, offset);
++	} else {
++		b43_write16(dev, offset, value);
++	}
++}
++#endif
++
+ static void setup_struct_phy_for_init(struct b43_wldev *dev,
+ 				      struct b43_phy *phy)
+ {
 --- a/drivers/net/wireless/b43/phy_common.c
 +++ b/drivers/net/wireless/b43/phy_common.c
 @@ -275,6 +275,12 @@ void b43_phy_write(struct b43_wldev *dev
@@ -199,7 +210,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  
 --- a/drivers/net/wireless/b43/phy_n.c
 +++ b/drivers/net/wireless/b43/phy_n.c
-@@ -6494,14 +6494,14 @@ static inline void check_phyreg(struct b
+@@ -6500,14 +6500,14 @@ static inline void check_phyreg(struct b
  static u16 b43_nphy_op_read(struct b43_wldev *dev, u16 reg)
  {
  	check_phyreg(dev, reg);
@@ -216,7 +227,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  	b43_write16(dev, B43_MMIO_PHY_DATA, value);
  }
  
-@@ -6509,7 +6509,7 @@ static void b43_nphy_op_maskset(struct b
+@@ -6515,7 +6515,7 @@ static void b43_nphy_op_maskset(struct b
  				 u16 set)
  {
  	check_phyreg(dev, reg);
@@ -225,7 +236,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  	b43_maskset16(dev, B43_MMIO_PHY_DATA, mask, set);
  }
  
-@@ -6523,7 +6523,7 @@ static u16 b43_nphy_op_radio_read(struct
+@@ -6529,7 +6529,7 @@ static u16 b43_nphy_op_radio_read(struct
  	else
  		reg |= 0x100;
  
@@ -234,7 +245,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  	return b43_read16(dev, B43_MMIO_RADIO_DATA_LOW);
  }
  
-@@ -6532,7 +6532,7 @@ static void b43_nphy_op_radio_write(stru
+@@ -6538,7 +6538,7 @@ static void b43_nphy_op_radio_write(stru
  	/* Register 1 is a 32-bit register. */
  	B43_WARN_ON(dev->phy.rev < 7 && reg == 1);
  

package/kernel/mac80211/patches/845-b43-only-use-gpio-0-1-for-led.patch

 --- a/drivers/net/wireless/b43/main.c
 +++ b/drivers/net/wireless/b43/main.c
-@@ -2815,6 +2815,14 @@ static int b43_gpio_init(struct b43_wlde
+@@ -2831,6 +2831,14 @@ static int b43_gpio_init(struct b43_wlde
  	} else if (dev->dev->chip_id == 0x5354) {
  		/* Don't allow overtaking buttons GPIOs */
  		set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */

package/kernel/mac80211/patches/910-01-add-support-for-mt7620.patch

---- a/drivers/net/wireless/rt2x00/rt2800.h	2014-06-30 01:05:26.000000000 +0300
-+++ b/drivers/net/wireless/rt2x00/rt2800.h	2014-06-30 01:23:42.000000000 +0300
+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
 @@ -79,6 +79,7 @@
  #define RF5372				0x5372
  #define RF5390				0x5390
@@ -62,8 +62,8 @@
  /* TX_PWR_CFG_7 */
  #define TX_PWR_CFG_7			0x13d4
  #define TX_PWR_CFG_7_OFDM54_CH0		FIELD32(0x0000000f)
---- a/drivers/net/wireless/rt2x00/rt2800lib.c	2014-06-30 01:05:26.000000000 +0300
-+++ b/drivers/net/wireless/rt2x00/rt2800lib.c	2014-06-30 17:31:35.000000000 +0300
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
 @@ -61,6 +61,8 @@
  	rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg))
  #define WAIT_FOR_RFCSR(__dev, __reg) \
@@ -539,7 +539,7 @@
  	default:
  		rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info);
  	}
-@@ -3631,7 +4010,7 @@ static void rt2800_config_channel(struct
+@@ -3636,7 +4015,7 @@ static void rt2800_config_channel(struct
  		else if (rt2x00_rt(rt2x00dev, RT3593) ||
  			 rt2x00_rt(rt2x00dev, RT3883))
  			rt2800_bbp_write(rt2x00dev, 82, 0x82);
@@ -548,7 +548,7 @@
  			rt2800_bbp_write(rt2x00dev, 82, 0xf2);
  
  		if (rt2x00_rt(rt2x00dev, RT3593) ||
-@@ -3653,7 +4032,7 @@ static void rt2800_config_channel(struct
+@@ -3658,7 +4037,7 @@ static void rt2800_config_channel(struct
  	if (rt2x00_rt(rt2x00dev, RT3572))
  		rt2800_rfcsr_write(rt2x00dev, 8, 0);
  
@@ -557,7 +557,7 @@
  
  	switch (rt2x00dev->default_ant.tx_chain_num) {
  	case 3:
-@@ -3702,6 +4081,7 @@ static void rt2800_config_channel(struct
+@@ -3707,6 +4086,7 @@ static void rt2800_config_channel(struct
  
  	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1);
  	rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1);
@@ -565,7 +565,7 @@
  
  	rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin);
  
-@@ -4710,6 +5090,14 @@ void rt2800_vco_calibration(struct rt2x0
+@@ -4715,6 +5095,14 @@ void rt2800_vco_calibration(struct rt2x0
  		rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1);
  		rt2800_rfcsr_write(rt2x00dev, 3, rfcsr);
  		break;
@@ -580,7 +580,7 @@
  	default:
  		return;
  	}
-@@ -5110,9 +5498,42 @@ static int rt2800_init_registers(struct
+@@ -5115,9 +5503,42 @@ static int rt2800_init_registers(struct 
  	} else if (rt2x00_rt(rt2x00dev, RT5390) ||
  		   rt2x00_rt(rt2x00dev, RT5392) ||
  		   rt2x00_rt(rt2x00dev, RT5592)) {
@@ -626,7 +626,7 @@
  	} else if (rt2x00_rt(rt2x00dev, RT5350)) {
  		rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404);
  	} else {
-@@ -6144,6 +6565,225 @@ static void rt2800_init_bbp_5592(struct
+@@ -6149,6 +6570,225 @@ static void rt2800_init_bbp_5592(struct 
  		rt2800_bbp_write(rt2x00dev, 103, 0xc0);
  }
  
@@ -852,7 +852,7 @@
  static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev)
  {
  	unsigned int i;
-@@ -6186,7 +6826,10 @@ static void rt2800_init_bbp(struct rt2x0
+@@ -6191,7 +6831,10 @@ static void rt2800_init_bbp(struct rt2x0
  		return;
  	case RT5390:
  	case RT5392:
@@ -864,7 +864,7 @@
  		break;
  	case RT5592:
  		rt2800_init_bbp_5592(rt2x00dev);
-@@ -7400,6 +8043,295 @@ static void rt2800_init_rfcsr_5592(struc
+@@ -7405,6 +8048,295 @@ static void rt2800_init_rfcsr_5592(struc
  	rt2800_led_open_drain_enable(rt2x00dev);
  }
  
@@ -1160,7 +1160,7 @@
  static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev)
  {
  	if (rt2800_is_305x_soc(rt2x00dev)) {
-@@ -7435,7 +8367,10 @@ static void rt2800_init_rfcsr(struct rt2
+@@ -7440,7 +8372,10 @@ static void rt2800_init_rfcsr(struct rt2
  		rt2800_init_rfcsr_5350(rt2x00dev);
  		break;
  	case RT5390:
@@ -1172,7 +1172,7 @@
  		break;
  	case RT5392:
  		rt2800_init_rfcsr_5392(rt2x00dev);
-@@ -7866,6 +8801,7 @@ static int rt2800_init_eeprom(struct rt2
+@@ -7871,6 +8806,7 @@ static int rt2800_init_eeprom(struct rt2
  	case RF5390:
  	case RF5392:
  	case RF5592:
@@ -1180,7 +1180,7 @@
  		break;
  	default:
  		rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n",
-@@ -8431,6 +9367,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8436,6 +9372,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5372:
  	case RF5390:
  	case RF5392:
@@ -1188,7 +1188,7 @@
  		spec->num_channels = 14;
  		if (spec->clk_is_20mhz)
  			spec->channels = rf_vals_xtal20mhz_3x;
-@@ -8570,6 +9507,7 @@ static int rt2800_probe_hw_mode(struct r
+@@ -8575,6 +9512,7 @@ static int rt2800_probe_hw_mode(struct r
  	case RF5372:
  	case RF5390:
  	case RF5392:

package/kernel/mac80211/patches/925-rt2x00-backport_rf5362.patch

+--- a/drivers/net/wireless/rt2x00/rt2800.h
++++ b/drivers/net/wireless/rt2x00/rt2800.h
+@@ -53,6 +53,7 @@
+  * RF5592 2.4G/5G 2T2R
+  * RF3070 2.4G 1T1R
+  * RF5360 2.4G 1T1R
++ * RF5362 2.4G 1T1R
+  * RF5370 2.4G 1T1R
+  * RF5390 2.4G 1T1R
+  */
+@@ -75,6 +76,7 @@
+ #define RF3853				0x3853
+ #define RF5350				0x5350
+ #define RF5360				0x5360
++#define RF5362				0x5362
+ #define RF5370				0x5370
+ #define RF5372				0x5372
+ #define RF5390				0x5390
+@@ -2207,7 +2209,7 @@ struct mac_iveiv_entry {
+ /* Bits [7-4] for RF3320 (RT3370/RT3390), on other chipsets reserved */
+ #define RFCSR3_PA1_BIAS_CCK		FIELD8(0x70)
+ #define RFCSR3_PA2_CASCODE_BIAS_CCKK	FIELD8(0x80)
+-/* Bits for RF3290/RF5360/RF5370/RF5372/RF5390/RF5392 */
++/* Bits for RF3290/RF5360/RF5362/RF5370/RF5372/RF5390/RF5392 */
+ #define RFCSR3_VCOCAL_EN		FIELD8(0x80)
+ /* Bits for RF3050 */
+ #define RFCSR3_BIT1			FIELD8(0x02)
+--- a/drivers/net/wireless/rt2x00/rt2800lib.c
++++ b/drivers/net/wireless/rt2x00/rt2800lib.c
+@@ -3902,6 +3902,7 @@ static void rt2800_config_channel(struct
+ 	case RF3070:
+ 	case RF5350:
+ 	case RF5360:
++	case RF5362:
+ 	case RF5370:
+ 	case RF5372:
+ 	case RF5390:
+@@ -3923,6 +3924,7 @@ static void rt2800_config_channel(struct
+ 	    rt2x00_rf(rt2x00dev, RF3322) ||
+ 	    rt2x00_rf(rt2x00dev, RF5350) ||
+ 	    rt2x00_rf(rt2x00dev, RF5360) ||
++	    rt2x00_rf(rt2x00dev, RF5362) ||
+ 	    rt2x00_rf(rt2x00dev, RF5370) ||
+ 	    rt2x00_rf(rt2x00dev, RF5372) ||
+ 	    rt2x00_rf(rt2x00dev, RF5390) ||
+@@ -5087,6 +5089,7 @@ void rt2800_vco_calibration(struct rt2x0
+ 	case RF3853:
+ 	case RF5350:
+ 	case RF5360:
++	case RF5362:
+ 	case RF5370:
+ 	case RF5372:
+ 	case RF5390:
+@@ -8801,6 +8804,7 @@ static int rt2800_init_eeprom(struct rt2
+ 	case RF3853:
+ 	case RF5350:
+ 	case RF5360:
++	case RF5362:
+ 	case RF5370:
+ 	case RF5372:
+ 	case RF5390:
+@@ -9368,6 +9372,7 @@ static int rt2800_probe_hw_mode(struct r
+ 	case RF3322:
+ 	case RF5350:
+ 	case RF5360:
++	case RF5362:
+ 	case RF5370:
+ 	case RF5372:
+ 	case RF5390:
+@@ -9508,6 +9513,7 @@ static int rt2800_probe_hw_mode(struct r
+ 	case RF3853:
+ 	case RF5350:
+ 	case RF5360:
++	case RF5362:
+ 	case RF5370:
+ 	case RF5372:
+ 	case RF5390:

package/libs/cyassl/Makefile

@@ -8,12 +8,12 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=cyassl
-PKG_VERSION:=3.0.0
+PKG_VERSION:=3.2.0
 PKG_RELEASE:=1
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).zip
 PKG_SOURCE_URL:=http://www.yassl.com/
-PKG_MD5SUM:=d29a841796180890bae47b159bb76d38
+PKG_MD5SUM:=a80493c224ff86e45dc333c06d5edb88
 
 PKG_FIXUP:=libtool
 PKG_INSTALL:=1

package/libs/cyassl/patches/200-SSL_accept-handle-hello-garbage.patch

 --- a/src/internal.c
 +++ b/src/internal.c
-@@ -5063,6 +5063,10 @@ int ProcessReply(CYASSL* ssl)
+@@ -6037,6 +6037,10 @@ int ProcessReply(CYASSL* ssl)
                  b1 =
                  ssl->buffers.inputBuffer.buffer[ssl->buffers.inputBuffer.idx++];
                  ssl->curSize = (word16)(((b0 & 0x7f) << 8) | b1);

package/libs/gmp/Makefile

@@ -22,6 +22,7 @@ PKG_FIXUP:=autoreconf
 
 PKG_USE_MIPS16:=0
 
+include $(INCLUDE_DIR)/host-build.mk
 include $(INCLUDE_DIR)/package.mk
 
 define Package/libgmp
@@ -44,7 +45,6 @@ CONFIGURE_ARGS += \
 	--without-readline \
 	--disable-fft \
 
-
 define Build/Compile
 	$(call Build/Compile/Default, \
 		DESTDIR="$(PKG_INSTALL_DIR)" \
@@ -66,3 +66,4 @@ define Package/libgmp/install
 endef
 
 $(eval $(call BuildPackage,libgmp))
+$(eval $(call HostBuild))

package/libs/libubox/Makefile

 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=libubox
-PKG_VERSION:=2014-07-16
+PKG_VERSION:=2014-08-04
 PKG_RELEASE=$(PKG_SOURCE_VERSION)
 
 PKG_SOURCE_PROTO:=git
 PKG_SOURCE_URL:=http://git.openwrt.org/project/libubox.git
 PKG_SOURCE_SUBDIR:=$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE_VERSION:=bd388d2b6c2c151bf513c1e449417d18ce02d10b
+PKG_SOURCE_VERSION:=dffbc09baf71b294185a36048166d00066d433b5
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION)-$(PKG_SOURCE_VERSION).tar.gz
 PKG_MIRROR_MD5SUM:=
 CMAKE_INSTALL:=1
@@ -40,7 +40,7 @@ endef
 define Package/jshn
   SECTION:=utils
   CATEGORY:=Utilities
-  DEPENDS:=+libjson-c
+  DEPENDS:=+libjson-c +libubox +libblobmsg-json
   TITLE:=JSON SHell Notation
 endef
 

package/libs/nettle/Makefile

@@ -10,6 +10,7 @@ include $(TOPDIR)/rules.mk
 PKG_NAME:=nettle
 PKG_VERSION:=2.7.1
 PKG_RELEASE:=1
+PKG_USE_MIPS16:=0
 
 PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=@GNU/nettle

package/libs/openssl/Makefile

 #
-# Copyright (C) 2006-2012 OpenWrt.org
+# Copyright (C) 2006-2014 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -8,7 +8,7 @@
 include $(TOPDIR)/rules.mk
 
 PKG_NAME:=openssl
-PKG_VERSION:=1.0.1h
+PKG_VERSION:=1.0.1j
 PKG_RELEASE:=1
 PKG_USE_MIPS16:=0
 
@@ -18,7 +18,7 @@ PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.gz
 PKG_SOURCE_URL:=http://www.openssl.org/source/ \
 	ftp://ftp.funet.fi/pub/crypt/mirrors/ftp.openssl.org/source \
 	ftp://ftp.sunet.se/pub/security/tools/net/openssl/source/
-PKG_MD5SUM:=8d6d684a9430d5cc98a62a5d8fbda8cf
+PKG_MD5SUM:=f7175c9cd3c39bb1907ac8bba9df8ed3
 
 PKG_LICENSE:=SSLEAY OPENSSL
 PKG_LICENSE_FILES:=LICENSE
@@ -51,6 +51,7 @@ $(call Package/openssl/Default)
   CATEGORY:=Libraries
   DEPENDS:=+zlib
   TITLE+= (libraries)
+  ABI_VERSION:=$(PKG_VERSION)
   MENU:=1
 endef
 

package/libs/openssl/patches/150-no_engines.patch

 --- a/Configure
 +++ b/Configure
-@@ -2004,6 +2004,11 @@ EOF
+@@ -2011,6 +2011,11 @@ EOF
  	close(OUT);
    }
    

package/libs/openssl/patches/200-parallel_build.patch

@@ -97,7 +97,7 @@
  		fi; \
 --- a/crypto/Makefile
 +++ b/crypto/Makefile
-@@ -88,11 +88,11 @@ testapps:
+@@ -90,11 +90,11 @@ testapps:
  	@if [ -z "$(THIS)" ]; then $(MAKE) -f $(TOP)/Makefile reflect THIS=$@; fi
  
  subdirs:
@@ -111,7 +111,7 @@
  
  links:
  	@$(PERL) $(TOP)/util/mklink.pl ../include/openssl $(EXHEADER)
-@@ -103,7 +103,7 @@ links:
+@@ -105,7 +105,7 @@ links:
  # lib: $(LIB): are splitted to avoid end-less loop
  lib:	$(LIB)
  	@touch lib
@@ -120,7 +120,7 @@
  	$(AR) $(LIB) $(LIBOBJ)
  	[ -z "$(FIPSLIBDIR)" ] || $(AR) $(LIB) $(FIPSLIBDIR)fipscanister.o
  	$(RANLIB) $(LIB) || echo Never mind.
-@@ -114,7 +114,7 @@ shared: buildinf.h lib subdirs
+@@ -116,7 +116,7 @@ shared: buildinf.h lib subdirs
  	fi
  
  libs:
@@ -129,7 +129,7 @@
  
  install:
  	@[ -n "$(INSTALLTOP)" ] # should be set by top Makefile...
-@@ -123,7 +123,7 @@ install:
+@@ -125,7 +125,7 @@ install:
  	(cp $$i $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i; \
  	chmod 644 $(INSTALL_PREFIX)$(INSTALLTOP)/include/openssl/$$i ); \
  	done;
@@ -169,7 +169,7 @@
  	ctags $(SRC)
 --- a/test/Makefile
 +++ b/test/Makefile
-@@ -124,7 +124,7 @@ install:
+@@ -129,7 +129,7 @@ install:
  tags:
  	ctags $(SRC)
  
@@ -178,7 +178,7 @@
  
  apps:
  	@(cd ..; $(MAKE) DIRS=apps all)
-@@ -365,109 +365,109 @@ FIPS_BUILD_CMD=shlib_target=; if [ -n "$
+@@ -384,109 +384,109 @@ BUILD_CMD_STATIC=shlib_target=; \
  		link_app.$${shlib_target}
  
  $(RSATEST)$(EXE_EXT): $(RSATEST).o $(DLIBCRYPTO)
@@ -321,9 +321,9 @@
 -	@target=$(SRPTEST); $(BUILD_CMD)
 +	+@target=$(SRPTEST); $(BUILD_CMD)
  
- #$(AESTEST).o: $(AESTEST).c
- #	$(CC) -c $(CFLAGS) -DINTERMEDIATE_VALUE_KAT -DTRACE_KAT_MCT $(AESTEST).c
-@@ -480,7 +480,7 @@ $(SRPTEST)$(EXE_EXT): $(SRPTEST).o $(DLI
+ $(HEARTBEATTEST)$(EXE_EXT): $(HEARTBEATTEST).o $(DLIBCRYPTO)
+ 	@target=$(HEARTBEATTEST); $(BUILD_CMD_STATIC)
+@@ -505,7 +505,7 @@ $(CONSTTIMETEST)$(EXE_EXT): $(CONSTTIMET
  #	fi
  
  dummytest$(EXE_EXT): dummytest.o $(DLIBCRYPTO)