From b9ad8c3b589948a4cc942f86e4e57712c7ff24e2 Mon Sep 17 00:00:00 2001
From: hauke <hauke@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Sun, 7 Dec 2014 21:53:20 +0000
Subject: [PATCH] kernel: update bcma and ssb to wireless-testing
master-2014-12-05
This brings ssb and bcma to wireless-testing tag master-2014-12-05
In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@43544 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
...-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch | 58 ++++
...M5301X-Add-buttons-for-Netgear-R6250.patch | 7 -
.../121-bcma-get-irqs-from-dt.patch | 38 ---
.../130-ARM-BCM5301X-register-bcma-bus.patch | 108 ++------
...2-bcma-add-new-PCIe2-driver-for-bcma.patch | 4 +-
...-Switch-DT-files-to-gpio-keys-polled.patch | 13 -
...nable-ChipCommon-UART-serial-console.patch | 11 -
...M5301X-Add-DT-for-Buffalo-WZR-900DHP.patch | 8 -
.../patches-3.14/420-mtd-bcm5301x_nand.patch | 17 +-
...-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch | 58 ++++
...sible-to-specify-a-IRQ-num-in-bcma_c.patch | 162 -----------
.../061-bcma-get-IRQ-numbers-from-dt.patch | 141 ----------
.../130-ARM-BCM5301X-register-bcma-bus.patch | 108 ++------
...2-bcma-add-new-PCIe2-driver-for-bcma.patch | 2 +-
.../patches-3.18/420-mtd-bcm5301x_nand.patch | 17 +-
.../generic/patches-3.10/020-ssb_update.patch | 83 +++++-
.../patches-3.10/025-bcma_backport.patch | 258 +++++++++++++++---
.../generic/patches-3.14/020-ssb_update.patch | 90 ++++++
.../patches-3.14/025-bcma_backport.patch | 231 +++++++++++++++-
...mtd-device-named-ubi-or-data-on-boot.patch | 4 +-
.../generic/patches-3.18/020-ssb_update.patch | 78 ++++++
.../patches-3.18/025-bcma_backport.patch | 211 +++++++++++++-
22 files changed, 1092 insertions(+), 615 deletions(-)
create mode 100644 target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
delete mode 100644 target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch
create mode 100644 target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
delete mode 100644 target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch
delete mode 100644 target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch
create mode 100644 target/linux/generic/patches-3.18/020-ssb_update.patch
diff --git a/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch b/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
new file mode 100644
index 0000000000..35cd0ca90a
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
@@ -0,0 +1,58 @@
+From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 24 Sep 2014 23:50:07 +0200
+Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
+
+IRQ support for Broadcom's bus-axi driver bcma was merged into John
+Linville's wireless tree and will show up in 3.19. This patch makes use
+of this feature in the DTS file for the the BCM5301X SoCs. I left the
+PCIe controller out, because this still needs some discussion.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -101,6 +101,40 @@
+ #address-cells = <1>;
+ #size-cells = <1>;
+
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0x000fffff 0xffff>;
++ interrupt-map =
++ /* ChipCommon */
++ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* USB 2.0 Controller */
++ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* USB 3.0 Controller */
++ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 0 */
++ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 1 */
++ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 2 */
++ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 3 */
++ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* NAND Controller */
++ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++
+ chipcommon: chipcommon@0 {
+ reg = <0x00000000 0x1000>;
+
diff --git a/target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch b/target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
index 82aa11c5c4..2b9b900064 100644
--- a/target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
+++ b/target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
@@ -13,8 +13,6 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
arch/arm/boot/dts/bcm5301x.dtsi | 1 +
2 files changed, 26 insertions(+)
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 58d999d..4ed7de1 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -66,4 +66,29 @@
@@ -47,8 +45,6 @@ index 58d999d..4ed7de1 100644
+ };
+ };
};
-diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
-index b7c4e9e..78aec62 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -9,6 +9,7 @@
@@ -59,6 +55,3 @@ index b7c4e9e..78aec62 100644
#include <dt-bindings/interrupt-controller/irq.h>
#include <dt-bindings/interrupt-controller/arm-gic.h>
#include "skeleton.dtsi"
---
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch b/target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch
deleted file mode 100644
index e38b5bc1c6..0000000000
--- a/target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch
+++ /dev/null
@@ -1,38 +0,0 @@
-From 6611afa6c49434780096cdf2c1028f0ac277f9bc Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 9 Jan 2014 19:40:14 +0100
-Subject: [PATCH v3 2/2] bcma: get IRQ numbers from dt
-
-It is not possible to auto detect the irq numbers used by the cores on
-an arm SoC. If bcma was registered with device tree it will search for
-some device tree nodes with the irq number and add it to the core
-configuration.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/main.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 48 insertions(+), 1 deletion(-)
-
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
-+#include <linux/of_irq.h>
- #include <linux/of_address.h>
-
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
-@@ -159,8 +160,10 @@ static void bcma_of_fill_device(struct p
- struct device_node *node;
-
- node = bcma_of_find_child_device(parent, core);
-- if (node)
-- core->dev.of_node = node;
-+ if (!node)
-+ return;
-+ core->dev.of_node = node;
-+ core->irq = irq_of_parse_and_map(node, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,
diff --git a/target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch b/target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch
index 024123f9d3..4044b44ff2 100644
--- a/target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch
+++ b/target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch
@@ -9,7 +9,7 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -94,18 +94,102 @@
+@@ -95,12 +95,23 @@
};
};
@@ -31,84 +31,36 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
#size-cells = <1>;
+ sprom = <&sprom0>;
- chipcommon: chipcommon@0 {
- reg = <0x00000000 0x1000>;
-+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+@@ -108,6 +119,30 @@
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- gpio-controller;
- #gpio-cells = <2>;
- };
-+
-+ pcie@12000 {
-+ reg = <0x00012000 0x1000>;
-+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ pcie@13000 {
-+ reg = <0x00013000 0x1000>;
-+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ pcie@14000 {
-+ reg = <0x00014000 0x1000>;
-+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ };
++ /* PCIe Controller 0 */
++ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ };
++ /* PCIe Controller 1 */
++ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
-+ ethernet@24000 {
-+ reg = <0x00024000 0x1000>;
-+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-+ };
++ /* PCIe Controller 2 */
++ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
-+ ethernet@25000 {
-+ reg = <0x00025000 0x1000>;
-+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ ethernet@26000 {
-+ reg = <0x00026000 0x1000>;
-+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ ethernet@27000 {
-+ reg = <0x00027000 0x1000>;
-+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ nand@28000 {
-+ reg = <0x00028000 0x1000>;
-+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+ };
- };
- };
+ /* USB 2.0 Controller */
+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
diff --git a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
index 84e6c06f5f..1b6149f20f 100644
--- a/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
+++ b/target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
@@ -17,7 +17,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
-@@ -46,6 +46,7 @@ config ARCH_BCM_5301X
+@@ -45,6 +45,7 @@ config ARCH_BCM_5301X
select ARM_GLOBAL_TIMER
select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
select MIGHT_HAVE_PCI
@@ -120,7 +120,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ struct pci_sys_data *sys = pdev->sysdata;
+ struct bcma_device *bdev = sys->private_data;
+
-+ return bdev->irq;
++ return bcma_core_irq(bdev, 5);
+}
+
+static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,
diff --git a/target/linux/bcm53xx/patches-3.14/304-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch b/target/linux/bcm53xx/patches-3.14/304-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch
index ca7582d168..b107fe378c 100644
--- a/target/linux/bcm53xx/patches-3.14/304-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch
+++ b/target/linux/bcm53xx/patches-3.14/304-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch
@@ -17,8 +17,6 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
5 files changed, 5 insertions(+), 5 deletions(-)
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 5fc0fae..583720e 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -24,7 +24,7 @@
@@ -30,8 +28,6 @@ index 5fc0fae..583720e 100644
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 05e80b1..70a1093 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
@@ -68,7 +68,7 @@
@@ -43,8 +39,6 @@ index 05e80b1..70a1093 100644
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-index 12fc2a0..ac299a2 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -58,7 +58,7 @@
@@ -56,8 +50,6 @@ index 12fc2a0..ac299a2 100644
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index fb76378..934b244 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -58,7 +58,7 @@
@@ -69,8 +61,6 @@ index fb76378..934b244 100644
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index bbb414f..d2aefef 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -24,7 +24,7 @@
@@ -82,6 +72,3 @@ index bbb414f..d2aefef 100644
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <200>;
---
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/305-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch b/target/linux/bcm53xx/patches-3.14/305-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch
index 7d90697c6c..c81e20ff4a 100644
--- a/target/linux/bcm53xx/patches-3.14/305-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch
+++ b/target/linux/bcm53xx/patches-3.14/305-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch
@@ -14,8 +14,6 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 10 ++++++++++
4 files changed, 40 insertions(+)
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 583720e..d472c36 100644
--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
@@ -23,6 +23,16 @@
@@ -35,8 +33,6 @@ index 583720e..d472c36 100644
gpio-keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-index ac299a2..257d6da 100644
--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
@@ -23,6 +23,16 @@
@@ -56,8 +52,6 @@ index ac299a2..257d6da 100644
leds {
compatible = "gpio-leds";
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index 934b244..cad0e85 100644
--- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
+++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
@@ -23,6 +23,16 @@
@@ -77,8 +71,6 @@ index 934b244..cad0e85 100644
leds {
compatible = "gpio-leds";
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index d2aefef..f3a0326 100644
--- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
@@ -23,6 +23,16 @@
@@ -98,6 +90,3 @@ index d2aefef..f3a0326 100644
gpio-keys {
compatible = "gpio-keys-polled";
#address-cells = <1>;
---
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch b/target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
index 96c728dfb0..197869745d 100644
--- a/target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
+++ b/target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
@@ -13,8 +13,6 @@ Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2 files changed, 37 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 64c8f3f..41e8455 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -55,7 +55,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -27,9 +25,6 @@ index 64c8f3f..41e8455 100644
dtb-$(CONFIG_ARCH_BERLIN) += \
berlin2-sony-nsz-gs7.dtb \
berlin2cd-google-chromecast.dtb
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-new file mode 100644
-index 0000000..5e4b3a9
--- /dev/null
+++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
@@ -0,0 +1,35 @@
@@ -68,6 +63,3 @@ index 0000000..5e4b3a9
+ };
+ };
+};
---
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch b/target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch
index 86c288d41e..0e03870883 100644
--- a/target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch
+++ b/target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch
@@ -22,7 +22,7 @@
nand-objs := nand_base.o nand_bbt.o
--- /dev/null
+++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1591 @@
+@@ -0,0 +1,1590 @@
+/*
+ * Nortstar NAND controller driver
+ * for Linux NAND library and MTD interface
@@ -1527,15 +1527,9 @@
+static int bcmnand_probe(struct bcma_device *core)
+{
+ struct device *dev = &core->dev;
-+ struct device_node *np = dev->of_node;
+ struct bcmnand_ctrl *ctrl;
+ int res, i, irq;
+
-+ if (!np) {
-+ pr_err("%s: no device tree node found\n", DRV_NAME);
-+ return -ENOENT;
-+ }
-+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
@@ -1546,8 +1540,13 @@
+ ctrl->core = core;
+
+ /* Acquire all interrupt lines */
-+ for (i = 0; i < of_irq_count(np); i++) {
-+ irq = irq_of_parse_and_map(np, i);
++ for (i = 0; i < NANDC_IRQ_NUM; i++) {
++ irq = bcma_core_irq(core, i);
++ if (!irq) {
++ pr_err("%s: IRQ no available irq: %i (idx: %i)\n",
++ DRV_NAME, irq, i);
++ return res;
++ }
+ res = devm_request_irq(dev, irq, bcmnand_isr, 0, DRV_NAME, ctrl);
+ if (res < 0) {
+ pr_err("%s: problem requesting irq: %i (idx: %i)\n",
diff --git a/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch b/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
new file mode 100644
index 0000000000..35cd0ca90a
--- /dev/null
+++ b/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
@@ -0,0 +1,58 @@
+From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 24 Sep 2014 23:50:07 +0200
+Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
+
+IRQ support for Broadcom's bus-axi driver bcma was merged into John
+Linville's wireless tree and will show up in 3.19. This patch makes use
+of this feature in the DTS file for the the BCM5301X SoCs. I left the
+PCIe controller out, because this still needs some discussion.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -101,6 +101,40 @@
+ #address-cells = <1>;
+ #size-cells = <1>;
+
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0x000fffff 0xffff>;
++ interrupt-map =
++ /* ChipCommon */
++ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* USB 2.0 Controller */
++ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* USB 3.0 Controller */
++ <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 0 */
++ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 1 */
++ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 2 */
++ <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 3 */
++ <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* NAND Controller */
++ <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++
+ chipcommon: chipcommon@0 {
+ reg = <0x00000000 0x1000>;
+
diff --git a/target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch b/target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch
deleted file mode 100644
index d030b86ac2..0000000000
--- a/target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch
+++ /dev/null
@@ -1,162 +0,0 @@
-From f3bbc921543ad8098617a5a6a8054fab11878a25 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 1 Oct 2014 00:30:37 +0200
-Subject: [PATCH 1/3] bcma: make it possible to specify a IRQ num in
- bcma_core_irq()
-
-This moves bcma_core_irq() to main.c and add a extra parameter with a
-number so that we can return different irq number for devices with more
-than one.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/driver_chipcommon.c | 2 +-
- drivers/bcma/driver_gpio.c | 4 ++--
- drivers/bcma/driver_mips.c | 11 ++---------
- drivers/bcma/driver_pci_host.c | 4 ++--
- drivers/bcma/main.c | 22 ++++++++++++++++++++++
- include/linux/bcma/bcma.h | 2 ++
- include/linux/bcma/bcma_driver_mips.h | 4 ++--
- 7 files changed, 33 insertions(+), 16 deletions(-)
-
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
- return;
- }
-
-- irq = bcma_core_irq(cc->core);
-+ irq = bcma_core_irq(cc->core, 0);
-
- /* Determine the registers of the UARTs */
- cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
- handle_simple_irq);
- }
-
-- hwirq = bcma_core_irq(cc->core);
-+ hwirq = bcma_core_irq(cc->core, 0);
- err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
- cc);
- if (err)
-@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
- return;
-
- bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
-- free_irq(bcma_core_irq(cc->core), cc);
-+ free_irq(bcma_core_irq(cc->core, 0), cc);
- for (gpio = 0; gpio < chip->ngpio; gpio++) {
- int irq = irq_find_mapping(cc->irq_domain, gpio);
-
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
- * If disabled, 5 is returned.
- * If not supported, 6 is returned.
- */
--static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
-+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
- struct bcma_device *mdev = dev->bus->drv_mips.core;
- u32 irqflag;
-@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
- return 5;
- }
-
--unsigned int bcma_core_irq(struct bcma_device *dev)
--{
-- unsigned int mips_irq = bcma_core_mips_irq(dev);
-- return mips_irq <= 4 ? mips_irq + 2 : 0;
--}
--EXPORT_SYMBOL(bcma_core_irq);
--
- static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
- {
- unsigned int oldirq = bcma_core_mips_irq(dev);
-@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
- break;
- default:
- list_for_each_entry(core, &bus->cores, list) {
-- core->irq = bcma_core_irq(core);
-+ core->irq = bcma_core_irq(core, 0);
- }
- bcma_err(bus,
- "Unknown device (0x%x) found, can not configure IRQs\n",
---- a/drivers/bcma/driver_pci_host.c
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
- pr_info("PCI: Fixing up device %s\n", pci_name(dev));
-
- /* Fix up interrupt lines */
-- dev->irq = bcma_core_irq(pc_host->pdev->core);
-+ dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
- pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-
- readrq = pcie_get_readrq(dev);
-@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
-
- pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
- pci_ops);
-- return bcma_core_irq(pc_host->pdev->core);
-+ return bcma_core_irq(pc_host->pdev->core, 0);
- }
- EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -169,6 +169,28 @@ static void bcma_of_fill_device(struct p
- }
- #endif /* CONFIG_OF */
-
-+unsigned int bcma_core_irq(struct bcma_device *core, int num)
-+{
-+ struct bcma_bus *bus = core->bus;
-+ unsigned int mips_irq;
-+
-+ switch (bus->hosttype) {
-+ case BCMA_HOSTTYPE_PCI:
-+ return bus->host_pci->irq;
-+ case BCMA_HOSTTYPE_SOC:
-+ if (bus->drv_mips.core && num == 0) {
-+ mips_irq = bcma_core_mips_irq(core);
-+ return mips_irq <= 4 ? mips_irq + 2 : 0;
-+ }
-+ break;
-+ case BCMA_HOSTTYPE_SDIO:
-+ return 0;
-+ }
-+
-+ return 0;
-+}
-+EXPORT_SYMBOL(bcma_core_irq);
-+
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
- {
- core->dev.release = bcma_release_core_dev;
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
- #define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
- extern u32 bcma_core_dma_translation(struct bcma_device *core);
-
-+extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
-+
- #endif /* LINUX_BCMA_H_ */
---- a/include/linux/bcma/bcma_driver_mips.h
-+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -43,12 +43,12 @@ struct bcma_drv_mips {
- extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
- extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
-
--extern unsigned int bcma_core_irq(struct bcma_device *core);
-+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
- #else
- static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
- static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
-
--static inline unsigned int bcma_core_irq(struct bcma_device *core)
-+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
- return 0;
- }
diff --git a/target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch b/target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch
deleted file mode 100644
index 886f6fb9c9..0000000000
--- a/target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch
+++ /dev/null
@@ -1,141 +0,0 @@
-From 4eb6a1fd46965ed6c3fb9327276eb53a3021eaaa Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 9 Jan 2014 19:40:14 +0100
-Subject: [PATCH 3/3] bcma: get IRQ numbers from dt
-
-It is not possible to auto detect the irq numbers used by the cores on
-an arm SoC. If bcma was registered with device tree it will search for
-some device tree nodes with the irq number and add it to the core
-configuration.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- Documentation/devicetree/bindings/bus/bcma.txt | 21 +++++++++++
- drivers/bcma/main.c | 52 +++++++++++++++++++++++++-
- 2 files changed, 72 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/bus/bcma.txt
-+++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -8,6 +8,11 @@ Required properties:
-
- The cores on the AXI bus are automatically detected by bcma with the
- memory ranges they are using and they get registered afterwards.
-+Automatic detection of the IRQ number is not working on
-+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
-+them manually through device tree. Use an interrupt-map to specify the
-+IRQ used by the devices on the bus. The first address is just an index,
-+because we do not have any special register.
-
- The top-level axi bus may contain children representing attached cores
- (devices). This is needed since some hardware details can't be auto
-@@ -22,6 +27,22 @@ Example:
- ranges = <0x00000000 0x18000000 0x00100000>;
- #address-cells = <1>;
- #size-cells = <1>;
-+ #interrupt-cells = <1>;
-+ interrupt-map-mask = <0x000fffff 0xffff>;
-+ interrupt-map =
-+ /* Ethernet Controller 0 */
-+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+ /* Ethernet Controller 1 */
-+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+
-+ /* PCIe Controller 0 */
-+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-
- chipcommon {
- reg = <0x00000000 0x1000>;
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -11,6 +11,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
- #include <linux/of_address.h>
-+#include <linux/of_irq.h>
-
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
- MODULE_LICENSE("GPL");
-@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
- return NULL;
- }
-
-+static int bcma_of_irq_parse(struct platform_device *parent,
-+ struct bcma_device *core,
-+ struct of_phandle_args *out_irq, int num)
-+{
-+ __be32 laddr[1];
-+ int rc;
-+
-+ if (core->dev.of_node) {
-+ rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
-+ if (!rc)
-+ return rc;
-+ }
-+
-+ out_irq->np = parent->dev.of_node;
-+ out_irq->args_count = 1;
-+ out_irq->args[0] = num;
-+
-+ laddr[0] = cpu_to_be32(core->addr);
-+ return of_irq_parse_raw(laddr, out_irq);
-+}
-+
-+static unsigned int bcma_of_get_irq(struct platform_device *parent,
-+ struct bcma_device *core, int num)
-+{
-+ struct of_phandle_args out_irq;
-+ int ret;
-+
-+ if (!parent || !parent->dev.of_node)
-+ return 0;
-+
-+ ret = bcma_of_irq_parse(parent, core, &out_irq, num);
-+ if (ret) {
-+ bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
-+ ret);
-+ return 0;
-+ }
-+
-+ return irq_create_of_mapping(&out_irq);
-+}
-+
- static void bcma_of_fill_device(struct platform_device *parent,
- struct bcma_device *core)
- {
-@@ -161,12 +202,19 @@ static void bcma_of_fill_device(struct p
- node = bcma_of_find_child_device(parent, core);
- if (node)
- core->dev.of_node = node;
-+
-+ core->irq = bcma_of_get_irq(parent, core, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,
- struct bcma_device *core)
- {
- }
-+static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
-+ struct bcma_device *core, int num)
-+{
-+ return 0;
-+}
- #endif /* CONFIG_OF */
-
- unsigned int bcma_core_irq(struct bcma_device *core, int num)
-@@ -182,7 +230,9 @@ unsigned int bcma_core_irq(struct bcma_d
- mips_irq = bcma_core_mips_irq(core);
- return mips_irq <= 4 ? mips_irq + 2 : 0;
- }
-- break;
-+ if (bus->host_pdev)
-+ return bcma_of_get_irq(bus->host_pdev, core, num);
-+ return 0;
- case BCMA_HOSTTYPE_SDIO:
- return 0;
- }
diff --git a/target/linux/bcm53xx/patches-3.18/130-ARM-BCM5301X-register-bcma-bus.patch b/target/linux/bcm53xx/patches-3.18/130-ARM-BCM5301X-register-bcma-bus.patch
index c6dbf7bf7e..4044b44ff2 100644
--- a/target/linux/bcm53xx/patches-3.18/130-ARM-BCM5301X-register-bcma-bus.patch
+++ b/target/linux/bcm53xx/patches-3.18/130-ARM-BCM5301X-register-bcma-bus.patch
@@ -9,7 +9,7 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -95,18 +95,102 @@
+@@ -95,12 +95,23 @@
};
};
@@ -31,84 +31,36 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
#size-cells = <1>;
+ sprom = <&sprom0>;
- chipcommon: chipcommon@0 {
- reg = <0x00000000 0x1000>;
-+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+@@ -108,6 +119,30 @@
+ /* ChipCommon */
+ <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
- gpio-controller;
- #gpio-cells = <2>;
- };
-+
-+ pcie@12000 {
-+ reg = <0x00012000 0x1000>;
-+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ pcie@13000 {
-+ reg = <0x00013000 0x1000>;
-+ interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ pcie@14000 {
-+ reg = <0x00014000 0x1000>;
-+ interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ usb2@21000 {
-+ reg = <0x00021000 0x1000>;
-+ interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+ };
++ /* PCIe Controller 0 */
++ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
+
-+ usb3@23000 {
-+ reg = <0x00023000 0x1000>;
-+ interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+ };
++ /* PCIe Controller 1 */
++ <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
+
-+ ethernet@24000 {
-+ reg = <0x00024000 0x1000>;
-+ interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-+ };
++ /* PCIe Controller 2 */
++ <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
+
-+ ethernet@25000 {
-+ reg = <0x00025000 0x1000>;
-+ interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ ethernet@26000 {
-+ reg = <0x00026000 0x1000>;
-+ interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ ethernet@27000 {
-+ reg = <0x00027000 0x1000>;
-+ interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-+ };
-+
-+ nand@28000 {
-+ reg = <0x00028000 0x1000>;
-+ interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+ <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+ };
- };
- };
+ /* USB 2.0 Controller */
+ <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
+
diff --git a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
index 9254089c95..3efdeea218 100644
--- a/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
+++ b/target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
@@ -120,7 +120,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+ struct pci_sys_data *sys = pdev->sysdata;
+ struct bcma_device *bdev = sys->private_data;
+
-+ return bdev->irq;
++ return bcma_core_irq(bdev, 5);
+}
+
+static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,
diff --git a/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch b/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch
index 0b549f842c..d51ce04962 100644
--- a/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch
+++ b/target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch
@@ -22,7 +22,7 @@
nand-objs := nand_base.o nand_bbt.o nand_timings.o
--- /dev/null
+++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1591 @@
+@@ -0,0 +1,1590 @@
+/*
+ * Nortstar NAND controller driver
+ * for Linux NAND library and MTD interface
@@ -1527,15 +1527,9 @@
+static int bcmnand_probe(struct bcma_device *core)
+{
+ struct device *dev = &core->dev;
-+ struct device_node *np = dev->of_node;
+ struct bcmnand_ctrl *ctrl;
+ int res, i, irq;
+
-+ if (!np) {
-+ pr_err("%s: no device tree node found\n", DRV_NAME);
-+ return -ENOENT;
-+ }
-+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl)
+ return -ENOMEM;
@@ -1546,8 +1540,13 @@
+ ctrl->core = core;
+
+ /* Acquire all interrupt lines */
-+ for (i = 0; i < of_irq_count(np); i++) {
-+ irq = irq_of_parse_and_map(np, i);
++ for (i = 0; i < NANDC_IRQ_NUM; i++) {
++ irq = bcma_core_irq(core, i);
++ if (!irq) {
++ pr_err("%s: IRQ no available irq: %i (idx: %i)\n",
++ DRV_NAME, irq, i);
++ return res;
++ }
+ res = devm_request_irq(dev, irq, bcmnand_isr, 0, DRV_NAME, ctrl);
+ if (res < 0) {
+ pr_err("%s: problem requesting irq: %i (idx: %i)\n",
diff --git a/target/linux/generic/patches-3.10/020-ssb_update.patch b/target/linux/generic/patches-3.10/020-ssb_update.patch
index 6e93b9a91d..a85ab10967 100644
--- a/target/linux/generic/patches-3.10/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.10/020-ssb_update.patch
@@ -179,7 +179,7 @@
static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
{
struct ssb_bus *bus = ssb_gpio_get_bus(chip);
-@@ -74,19 +98,129 @@ static void ssb_gpio_chipco_free(struct
+@@ -74,19 +98,129 @@ static void ssb_gpio_chipco_free(struct
ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
}
@@ -526,6 +526,16 @@
int ssb_gpio_init(struct ssb_bus *bus)
{
if (ssb_chipco_available(&bus->chipco))
+@@ -201,7 +475,8 @@ int ssb_gpio_unregister(struct ssb_bus *
+ {
+ if (ssb_chipco_available(&bus->chipco) ||
+ ssb_extif_available(&bus->extif)) {
+- return gpiochip_remove(&bus->gpio);
++ gpiochip_remove(&bus->gpio);
++ return 0;
+ } else {
+ SSB_WARN_ON(1);
+ }
--- a/drivers/ssb/main.c
+++ b/drivers/ssb/main.c
@@ -553,6 +553,14 @@ static int ssb_devices_register(struct s
@@ -726,15 +736,82 @@
for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
--- a/drivers/ssb/pcihost_wrapper.c
+++ b/drivers/ssb/pcihost_wrapper.c
-@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+@@ -11,15 +11,17 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+
+
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++ struct pci_dev *dev = to_pci_dev(d);
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+ return err;
+ pci_save_state(dev);
+ pci_disable_device(dev);
+- pci_set_power_state(dev, pci_choose_state(dev, state));
++
++ /* if there is a wakeup enabled child device on ssb bus,
++ enable pci wakeup posibility. */
++ device_set_wakeup_enable(d, d->power.wakeup_path);
++
++ pci_prepare_to_sleep(dev);
+
+ return 0;
+ }
+
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++ struct pci_dev *dev = to_pci_dev(d);
struct ssb_bus *ssb = pci_get_drvdata(dev);
int err;
- pci_set_power_state(dev, 0);
-+ pci_set_power_state(dev, PCI_D0);
++ pci_back_from_sleep(dev);
err = pci_enable_device(dev);
if (err)
return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+
+ return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend NULL
+-# define ssb_pcihost_resume NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++ SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+ driver->probe = ssb_pcihost_probe;
+ driver->remove = ssb_pcihost_remove;
+- driver->suspend = ssb_pcihost_suspend;
+- driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++ driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+
+ return pci_register_driver(driver);
+ }
--- a/drivers/ssb/sprom.c
+++ b/drivers/ssb/sprom.c
@@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
diff --git a/target/linux/generic/patches-3.10/025-bcma_backport.patch b/target/linux/generic/patches-3.10/025-bcma_backport.patch
index f752b0b0a1..3ae8fd54a2 100644
--- a/target/linux/generic/patches-3.10/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.10/025-bcma_backport.patch
@@ -48,16 +48,17 @@
bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
--- a/drivers/bcma/bcma_private.h
+++ b/drivers/bcma/bcma_private.h
-@@ -22,6 +22,8 @@
+@@ -22,6 +22,9 @@
struct bcma_bus;
/* main.c */
+bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
+ int timeout);
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -31,8 +33,6 @@ int __init bcma_bus_early_register(struc
+@@ -31,8 +34,6 @@ int __init bcma_bus_early_register(struc
int bcma_bus_suspend(struct bcma_bus *bus);
int bcma_bus_resume(struct bcma_bus *bus);
#endif
@@ -66,7 +67,7 @@
/* scan.c */
int bcma_bus_scan(struct bcma_bus *bus);
-@@ -50,6 +50,10 @@ void bcma_chipco_serial_init(struct bcma
+@@ -50,6 +51,10 @@ void bcma_chipco_serial_init(struct bcma
extern struct platform_device bcma_pflash_dev;
#endif /* CONFIG_BCMA_DRIVER_MIPS */
@@ -77,7 +78,7 @@
/* driver_chipcommon_pmu.c */
u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
-@@ -84,6 +88,20 @@ extern int __init bcma_host_pci_init(voi
+@@ -84,6 +89,20 @@ extern int __init bcma_host_pci_init(voi
extern void __exit bcma_host_pci_exit(void);
#endif /* CONFIG_BCMA_HOST_PCI */
@@ -145,7 +146,7 @@
}
EXPORT_SYMBOL_GPL(bcma_core_disable);
-@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
bcma_aread32(core, BCMA_IOCTL);
bcma_awrite32(core, BCMA_RESET_CTL, 0);
@@ -173,6 +174,15 @@
}
if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -332,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ return;
+ }
+
+- irq = bcma_core_irq(cc->core);
++ irq = bcma_core_irq(cc->core, 0);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
@@ -374,7 +384,7 @@
};
static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
-@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
+@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
{
struct bcma_bus *bus = cc->core->bus;
struct bcma_sflash *sflash = &cc->sflash;
@@ -476,7 +486,7 @@
+ handle_simple_irq);
+ }
+
-+ hwirq = bcma_core_irq(cc->core);
++ hwirq = bcma_core_irq(cc->core, 0);
+ err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ cc);
+ if (err)
@@ -507,7 +517,7 @@
+ return;
+
+ bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
-+ free_irq(bcma_core_irq(cc->core), cc);
++ free_irq(bcma_core_irq(cc->core, 0), cc);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
@@ -557,7 +567,7 @@
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
* a random base number. */
-@@ -105,10 +239,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+@@ -105,10 +239,22 @@ int bcma_gpio_init(struct bcma_drv_cc *c
else
chip->base = -1;
@@ -577,8 +587,10 @@
int bcma_gpio_unregister(struct bcma_drv_cc *cc)
{
+- return gpiochip_remove(&cc->gpio);
+ bcma_gpio_irq_domain_exit(cc);
- return gpiochip_remove(&cc->gpio);
++ gpiochip_remove(&cc->gpio);
++ return 0;
}
--- a/drivers/bcma/driver_pci.c
+++ b/drivers/bcma/driver_pci.c
@@ -609,7 +621,7 @@
u8 address, u16 data)
{
int max_retries = 10;
-@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct
+@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct
pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
}
@@ -706,8 +718,12 @@
if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
/* This is not a device on the PCI-core bridge. */
-@@ -595,6 +596,11 @@ int bcma_core_pci_plat_dev_init(struct p
- dev->irq = bcma_core_irq(pc_host->pdev->core);
+@@ -592,9 +593,14 @@ int bcma_core_pci_plat_dev_init(struct p
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
+- dev->irq = bcma_core_irq(pc_host->pdev->core);
++ dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+ readrq = pcie_get_readrq(dev);
@@ -718,6 +734,14 @@
return 0;
}
EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
+@@ -611,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
+- return bcma_core_irq(pc_host->pdev->core);
++ return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- /dev/null
+++ b/drivers/bcma/driver_pcie2.c
@@ -0,0 +1,175 @@
@@ -922,7 +946,7 @@
/* Register */
err = bcma_bus_register(bus);
if (err)
-@@ -235,7 +241,6 @@ static void bcma_host_pci_remove(struct
+@@ -235,7 +241,6 @@ static void bcma_host_pci_remove(struct
pci_release_regions(dev);
pci_disable_device(dev);
kfree(bus);
@@ -930,15 +954,16 @@
}
#ifdef CONFIG_PM_SLEEP
-@@ -267,15 +272,20 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+@@ -267,15 +272,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
#endif /* CONFIG_PM_SLEEP */
-static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
+static const struct pci_device_id bcma_pci_bridge_tbl[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
+- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
- { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) }, /* 0xa8d8 */
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
@@ -948,21 +973,23 @@
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
{ PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
-+ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xA8DB */
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) }, /* 0xa8db, BCM43217 (sic!) */
++ { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) }, /* 0xa8dc */
{ 0, },
};
MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,8 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
#include <linux/slab.h>
+#include <linux/of_address.h>
++#include <linux/of_irq.h>
MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
MODULE_LICENSE("GPL");
-@@ -69,28 +70,36 @@ static u16 bcma_cc_core_id(struct bcma_b
+@@ -69,28 +71,36 @@ static u16 bcma_cc_core_id(struct bcma_b
return BCMA_CORE_CHIPCOMMON;
}
@@ -1010,7 +1037,7 @@
}
static void bcma_release_core_dev(struct device *dev)
-@@ -103,55 +112,121 @@ static void bcma_release_core_dev(struct
+@@ -103,55 +113,195 @@ static void bcma_release_core_dev(struct
kfree(core);
}
@@ -1026,7 +1053,7 @@
+ return false;
+}
+
-+#ifdef CONFIG_OF
++#if defined(CONFIG_OF) && defined(CONFIG_OF_ADDRESS)
+static struct device_node *bcma_of_find_child_device(struct platform_device *parent,
+ struct bcma_device *core)
+{
@@ -1047,6 +1074,46 @@
+ return NULL;
+}
+
++static int bcma_of_irq_parse(struct platform_device *parent,
++ struct bcma_device *core,
++ struct of_phandle_args *out_irq, int num)
++{
++ __be32 laddr[1];
++ int rc;
++
++ if (core->dev.of_node) {
++ rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++ if (!rc)
++ return rc;
++ }
++
++ out_irq->np = parent->dev.of_node;
++ out_irq->args_count = 1;
++ out_irq->args[0] = num;
++
++ laddr[0] = cpu_to_be32(core->addr);
++ return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ struct of_phandle_args out_irq;
++ int ret;
++
++ if (!parent || !parent->dev.of_node)
++ return 0;
++
++ ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++ if (ret) {
++ bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++ ret);
++ return 0;
++ }
++
++ return irq_create_of_mapping(&out_irq);
++}
++
+static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+{
@@ -1055,18 +1122,47 @@
+ node = bcma_of_find_child_device(parent, core);
+ if (node)
+ core->dev.of_node = node;
++
++ core->irq = bcma_of_get_irq(parent, core, 0);
+}
+#else
+static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+{
+}
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ return 0;
++}
+#endif /* CONFIG_OF */
+
-+static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
+{
-+ int err;
++ struct bcma_bus *bus = core->bus;
++ unsigned int mips_irq;
++
++ switch (bus->hosttype) {
++ case BCMA_HOSTTYPE_PCI:
++ return bus->host_pci->irq;
++ case BCMA_HOSTTYPE_SOC:
++ if (bus->drv_mips.core && num == 0) {
++ mips_irq = bcma_core_mips_irq(core);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
++ }
++ if (bus->host_pdev)
++ return bcma_of_get_irq(bus->host_pdev, core, num);
++ return 0;
++ case BCMA_HOSTTYPE_SDIO:
++ return 0;
++ }
+
++ return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++{
+ core->dev.release = bcma_release_core_dev;
+ core->dev.bus = &bcma_bus_type;
+ dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
@@ -1090,6 +1186,11 @@
+ case BCMA_HOSTTYPE_SDIO:
+ break;
+ }
++}
++
++static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++{
++ int err;
+
+ err = device_register(&core->dev);
+ if (err) {
@@ -1161,7 +1262,7 @@
}
#ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -218,7 +293,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -218,7 +368,7 @@ int bcma_bus_register(struct bcma_bus *b
err = bcma_bus_scan(bus);
if (err) {
bcma_err(bus, "Failed to scan: %d\n", err);
@@ -1170,7 +1271,7 @@
}
/* Early init CC core */
-@@ -228,6 +303,12 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -228,6 +378,12 @@ int bcma_bus_register(struct bcma_bus *b
bcma_core_chipcommon_early_init(&bus->drv_cc);
}
@@ -1183,7 +1284,7 @@
/* Try to get SPROM */
err = bcma_sprom_get(bus);
if (err == -ENOENT) {
-@@ -242,6 +323,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -242,6 +398,13 @@ int bcma_bus_register(struct bcma_bus *b
bcma_core_chipcommon_init(&bus->drv_cc);
}
@@ -1197,7 +1298,7 @@
/* Init MIPS core */
core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
if (core) {
-@@ -263,6 +351,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -263,6 +426,13 @@ int bcma_bus_register(struct bcma_bus *b
bcma_core_pci_init(&bus->drv_pci[1]);
}
@@ -1211,7 +1312,7 @@
/* Init GBIT MAC COMMON core */
core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
if (core) {
-@@ -271,7 +366,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -271,7 +441,7 @@ int bcma_bus_register(struct bcma_bus *b
}
/* Register found cores */
@@ -1220,7 +1321,7 @@
bcma_info(bus, "Bus registered\n");
-@@ -289,6 +384,8 @@ void bcma_bus_unregister(struct bcma_bus
+@@ -289,6 +459,8 @@ void bcma_bus_unregister(struct bcma_bus
else if (err)
bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
@@ -1229,7 +1330,7 @@
cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
-@@ -308,8 +405,6 @@ int __init bcma_bus_early_register(struc
+@@ -308,8 +480,6 @@ int __init bcma_bus_early_register(struc
struct bcma_device *core;
struct bcma_device_id match;
@@ -1238,7 +1339,7 @@
match.manuf = BCMA_MANUF_BCM;
match.id = bcma_cc_core_id(bus);
match.class = BCMA_CL_SIM;
-@@ -468,6 +563,11 @@ static int __init bcma_modinit(void)
+@@ -468,6 +638,11 @@ static int __init bcma_modinit(void)
if (err)
return err;
@@ -1250,7 +1351,7 @@
#ifdef CONFIG_BCMA_HOST_PCI
err = bcma_host_pci_init();
if (err) {
-@@ -485,6 +585,7 @@ static void __exit bcma_modexit(void)
+@@ -485,6 +660,7 @@ static void __exit bcma_modexit(void)
#ifdef CONFIG_BCMA_HOST_PCI
bcma_host_pci_exit();
#endif
@@ -1260,7 +1361,7 @@
module_exit(bcma_modexit)
--- a/drivers/bcma/scan.c
+++ b/drivers/bcma/scan.c
-@@ -32,6 +32,18 @@ static const struct bcma_device_id_name
+@@ -32,6 +32,18 @@ static const struct bcma_device_id_name
{ BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
{ BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
{ BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
@@ -1431,6 +1532,14 @@
erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+@@ -489,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+ bus->nr_cores++;
+ other_core = bcma_find_core_reverse(bus, core->id.id);
+ core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
++ bcma_prepare_core(bus, core);
+
+ bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+ core->core_index, bcma_device_name(&core->id),
--- a/drivers/bcma/sprom.c
+++ b/drivers/bcma/sprom.c
@@ -72,12 +72,12 @@ fail:
@@ -1760,6 +1869,13 @@
extern bool bcma_core_is_enabled(struct bcma_device *core);
extern void bcma_core_disable(struct bcma_device *core, u32 flags);
extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -415,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
+
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
--- a/include/linux/bcma/bcma_driver_chipcommon.h
+++ b/include/linux/bcma/bcma_driver_chipcommon.h
@@ -330,6 +330,8 @@
@@ -1869,6 +1985,23 @@
+void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value);
+
#endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ return 0;
+ }
--- a/include/linux/bcma/bcma_driver_pci.h
+++ b/include/linux/bcma/bcma_driver_pci.h
@@ -181,10 +181,31 @@ struct pci_dev;
@@ -2169,7 +2302,30 @@
static const char * const part_probes[] = { "bcm47xxpart", NULL };
static struct physmap_flash_data bcma_pflash_data = {
-@@ -229,11 +237,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -107,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
+ */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
+@@ -125,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+ return 5;
+ }
+
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+- unsigned int mips_irq = bcma_core_mips_irq(dev);
+- return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -229,11 +230,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
}
EXPORT_SYMBOL(bcma_cpu_clock);
@@ -2221,7 +2377,7 @@
switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
-@@ -269,6 +317,20 @@ static void bcma_core_mips_flash_detect(
+@@ -269,6 +310,20 @@ static void bcma_core_mips_flash_detect(
bcma_nflash_init(cc);
}
}
@@ -2242,6 +2398,15 @@
}
void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+@@ -361,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
+- core->irq = bcma_core_irq(core);
++ core->irq = bcma_core_irq(core, 0);
+ }
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
--- a/drivers/bcma/host_soc.c
+++ b/drivers/bcma/host_soc.c
@@ -7,6 +7,9 @@
@@ -2495,7 +2660,7 @@
bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -0,0 +1,32 @@
+@@ -0,0 +1,53 @@
+Driver for ARM AXI Bus with Broadcom Plugins (bcma)
+
+Required properties:
@@ -2506,6 +2671,11 @@
+
+The cores on the AXI bus are automatically detected by bcma with the
+memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
+
+The top-level axi bus may contain children representing attached cores
+(devices). This is needed since some hardware details can't be auto
@@ -2520,6 +2690,22 @@
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0x000fffff 0xffff>;
++ interrupt-map =
++ /* Ethernet Controller 0 */
++ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 1 */
++ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++ /* PCIe Controller 0 */
++ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon {
+ reg = <0x00000000 0x1000>;
diff --git a/target/linux/generic/patches-3.14/020-ssb_update.patch b/target/linux/generic/patches-3.14/020-ssb_update.patch
index 8367b69fb6..e1fd275af0 100644
--- a/target/linux/generic/patches-3.14/020-ssb_update.patch
+++ b/target/linux/generic/patches-3.14/020-ssb_update.patch
@@ -8,6 +8,18 @@
{ 0, },
};
MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
+--- a/drivers/ssb/driver_gpio.c
++++ b/drivers/ssb/driver_gpio.c
+@@ -475,7 +475,8 @@ int ssb_gpio_unregister(struct ssb_bus *
+ {
+ if (ssb_chipco_available(&bus->chipco) ||
+ ssb_extif_available(&bus->extif)) {
+- return gpiochip_remove(&bus->gpio);
++ gpiochip_remove(&bus->gpio);
++ return 0;
+ } else {
+ SSB_WARN_ON(1);
+ }
--- a/drivers/ssb/pci.c
+++ b/drivers/ssb/pci.c
@@ -326,13 +326,13 @@ err_ctlreg:
@@ -163,6 +175,84 @@
/* Extract cores power info info */
for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -11,15 +11,17 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+
+
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++ struct pci_dev *dev = to_pci_dev(d);
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+ return err;
+ pci_save_state(dev);
+ pci_disable_device(dev);
+- pci_set_power_state(dev, pci_choose_state(dev, state));
++
++ /* if there is a wakeup enabled child device on ssb bus,
++ enable pci wakeup posibility. */
++ device_set_wakeup_enable(d, d->power.wakeup_path);
++
++ pci_prepare_to_sleep(dev);
+
+ return 0;
+ }
+
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++ struct pci_dev *dev = to_pci_dev(d);
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, PCI_D0);
++ pci_back_from_sleep(dev);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+
+ return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend NULL
+-# define ssb_pcihost_resume NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++ SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+ driver->probe = ssb_pcihost_probe;
+ driver->remove = ssb_pcihost_remove;
+- driver->suspend = ssb_pcihost_suspend;
+- driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++ driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+
+ return pci_register_driver(driver);
+ }
--- a/include/linux/ssb/ssb.h
+++ b/include/linux/ssb/ssb.h
@@ -33,6 +33,7 @@ struct ssb_sprom {
diff --git a/target/linux/generic/patches-3.14/025-bcma_backport.patch b/target/linux/generic/patches-3.14/025-bcma_backport.patch
index a27cc8545e..2791ce1bb6 100644
--- a/target/linux/generic/patches-3.14/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.14/025-bcma_backport.patch
@@ -11,6 +11,17 @@
bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE) += driver_pci_host.o
bcma-$(CONFIG_BCMA_DRIVER_MIPS) += driver_mips.o
bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN) += driver_gmac_cmn.o
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ return;
+ }
+
+- irq = bcma_core_irq(cc->core);
++ irq = bcma_core_irq(cc->core, 0);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
--- a/drivers/bcma/driver_chipcommon_pmu.c
+++ b/drivers/bcma/driver_chipcommon_pmu.c
@@ -603,6 +603,8 @@ void bcma_pmu_spuravoid_pllupdate(struct
@@ -33,6 +44,24 @@
static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
{
struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
+ handle_simple_irq);
+ }
+
+- hwirq = bcma_core_irq(cc->core);
++ hwirq = bcma_core_irq(cc->core, 0);
+ err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ cc);
+ if (err)
+@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
+ return;
+
+ bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+- free_irq(bcma_core_irq(cc->core), cc);
++ free_irq(bcma_core_irq(cc->core, 0), cc);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
@@ -215,10 +215,22 @@ int bcma_gpio_init(struct bcma_drv_cc *c
chip->set = bcma_gpio_set_value;
chip->direction_input = bcma_gpio_direction_input;
@@ -58,6 +87,33 @@
/* There is just one SoC in one device and its GPIO addresses should be
* deterministic to address them more easily. The other buses could get
* a random base number. */
+@@ -243,5 +255,6 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+ int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+ {
+ bcma_gpio_irq_domain_exit(cc);
+- return gpiochip_remove(&cc->gpio);
++ gpiochip_remove(&cc->gpio);
++ return 0;
+ }
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
+- dev->irq = bcma_core_irq(pc_host->pdev->core);
++ dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ readrq = pcie_get_readrq(dev);
+@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
+- return bcma_core_irq(pc_host->pdev->core);
++ return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- /dev/null
+++ b/drivers/bcma/driver_pcie2.c
@@ -0,0 +1,175 @@
@@ -270,15 +326,16 @@
MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,8 @@
#include <linux/platform_device.h>
#include <linux/bcma/bcma.h>
#include <linux/slab.h>
+#include <linux/of_address.h>
++#include <linux/of_irq.h>
MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
MODULE_LICENSE("GPL");
-@@ -120,56 +121,124 @@ static void bcma_release_core_dev(struct
+@@ -120,56 +122,195 @@ static void bcma_release_core_dev(struct
kfree(core);
}
@@ -315,6 +372,46 @@
+ return NULL;
+}
+
++static int bcma_of_irq_parse(struct platform_device *parent,
++ struct bcma_device *core,
++ struct of_phandle_args *out_irq, int num)
++{
++ __be32 laddr[1];
++ int rc;
++
++ if (core->dev.of_node) {
++ rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++ if (!rc)
++ return rc;
++ }
++
++ out_irq->np = parent->dev.of_node;
++ out_irq->args_count = 1;
++ out_irq->args[0] = num;
++
++ laddr[0] = cpu_to_be32(core->addr);
++ return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ struct of_phandle_args out_irq;
++ int ret;
++
++ if (!parent || !parent->dev.of_node)
++ return 0;
++
++ ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++ if (ret) {
++ bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++ ret);
++ return 0;
++ }
++
++ return irq_create_of_mapping(&out_irq);
++}
++
+static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+{
@@ -323,14 +420,45 @@
+ node = bcma_of_find_child_device(parent, core);
+ if (node)
+ core->dev.of_node = node;
++
++ core->irq = bcma_of_get_irq(parent, core, 0);
+}
+#else
+static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+{
+}
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ return 0;
++}
+#endif /* CONFIG_OF */
+
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
++{
++ struct bcma_bus *bus = core->bus;
++ unsigned int mips_irq;
++
++ switch (bus->hosttype) {
++ case BCMA_HOSTTYPE_PCI:
++ return bus->host_pci->irq;
++ case BCMA_HOSTTYPE_SOC:
++ if (bus->drv_mips.core && num == 0) {
++ mips_irq = bcma_core_mips_irq(core);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
++ }
++ if (bus->host_pdev)
++ return bcma_of_get_irq(bus->host_pdev, core, num);
++ return 0;
++ case BCMA_HOSTTYPE_SDIO:
++ return 0;
++ }
++
++ return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
+{
+ core->dev.release = bcma_release_core_dev;
@@ -433,7 +561,7 @@
}
#ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -246,6 +315,12 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -246,6 +387,12 @@ int bcma_bus_register(struct bcma_bus *b
bcma_core_chipcommon_early_init(&bus->drv_cc);
}
@@ -446,7 +574,7 @@
/* Try to get SPROM */
err = bcma_sprom_get(bus);
if (err == -ENOENT) {
-@@ -260,6 +335,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -260,6 +407,13 @@ int bcma_bus_register(struct bcma_bus *b
bcma_core_chipcommon_init(&bus->drv_cc);
}
@@ -460,7 +588,7 @@
/* Init MIPS core */
core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
if (core) {
-@@ -281,6 +363,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -281,6 +435,13 @@ int bcma_bus_register(struct bcma_bus *b
bcma_core_pci_init(&bus->drv_pci[1]);
}
@@ -474,7 +602,7 @@
/* Init GBIT MAC COMMON core */
core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
if (core) {
-@@ -289,7 +378,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -289,7 +450,7 @@ int bcma_bus_register(struct bcma_bus *b
}
/* Register found cores */
@@ -483,7 +611,7 @@
bcma_info(bus, "Bus registered\n");
-@@ -307,6 +396,8 @@ void bcma_bus_unregister(struct bcma_bus
+@@ -307,6 +468,8 @@ void bcma_bus_unregister(struct bcma_bus
else if (err)
bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
@@ -492,7 +620,7 @@
cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
-@@ -326,8 +417,6 @@ int __init bcma_bus_early_register(struc
+@@ -326,8 +489,6 @@ int __init bcma_bus_early_register(struc
struct bcma_device *core;
struct bcma_device_id match;
@@ -501,7 +629,7 @@
match.manuf = BCMA_MANUF_BCM;
match.id = bcma_cc_core_id(bus);
match.class = BCMA_CL_SIM;
-@@ -486,6 +575,11 @@ static int __init bcma_modinit(void)
+@@ -486,6 +647,11 @@ static int __init bcma_modinit(void)
if (err)
return err;
@@ -513,7 +641,7 @@
#ifdef CONFIG_BCMA_HOST_PCI
err = bcma_host_pci_init();
if (err) {
-@@ -503,6 +597,7 @@ static void __exit bcma_modexit(void)
+@@ -503,6 +669,7 @@ static void __exit bcma_modexit(void)
#ifdef CONFIG_BCMA_HOST_PCI
bcma_host_pci_exit();
#endif
@@ -668,6 +796,30 @@
struct bcma_drv_mips drv_mips;
struct bcma_drv_gmac_cmn drv_gmac_cmn;
+@@ -440,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
+
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ return 0;
+ }
--- /dev/null
+++ b/include/linux/bcma/bcma_driver_pcie2.h
@@ -0,0 +1,158 @@
@@ -1115,7 +1267,30 @@
static const char * const part_probes[] = { "bcm47xxpart", NULL };
static struct physmap_flash_data bcma_pflash_data = {
-@@ -229,11 +237,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -107,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
+ */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
+@@ -125,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+ return 5;
+ }
+
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+- unsigned int mips_irq = bcma_core_mips_irq(dev);
+- return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -229,11 +230,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
}
EXPORT_SYMBOL(bcma_cpu_clock);
@@ -1167,7 +1342,7 @@
switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
case BCMA_CC_FLASHT_STSER:
-@@ -269,6 +317,20 @@ static void bcma_core_mips_flash_detect(
+@@ -269,6 +310,20 @@ static void bcma_core_mips_flash_detect(
bcma_nflash_init(cc);
}
}
@@ -1188,6 +1363,15 @@
}
void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+@@ -361,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
+- core->irq = bcma_core_irq(core);
++ core->irq = bcma_core_irq(core, 0);
+ }
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
--- a/include/linux/bcma/bcma_regs.h
+++ b/include/linux/bcma/bcma_regs.h
@@ -39,6 +39,11 @@
@@ -1366,7 +1550,7 @@
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -0,0 +1,32 @@
+@@ -0,0 +1,53 @@
+Driver for ARM AXI Bus with Broadcom Plugins (bcma)
+
+Required properties:
@@ -1377,6 +1561,11 @@
+
+The cores on the AXI bus are automatically detected by bcma with the
+memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
+
+The top-level axi bus may contain children representing attached cores
+(devices). This is needed since some hardware details can't be auto
@@ -1391,6 +1580,22 @@
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
++ #interrupt-cells = <1>;
++ interrupt-map-mask = <0x000fffff 0xffff>;
++ interrupt-map =
++ /* Ethernet Controller 0 */
++ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++ /* Ethernet Controller 1 */
++ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++ /* PCIe Controller 0 */
++ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon {
+ reg = <0x00000000 0x1000>;
diff --git a/target/linux/generic/patches-3.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch b/target/linux/generic/patches-3.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
index f97a442cb1..67600ae972 100644
--- a/target/linux/generic/patches-3.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
+++ b/target/linux/generic/patches-3.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
@@ -11,7 +11,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
--- a/drivers/mtd/ubi/build.c
+++ b/drivers/mtd/ubi/build.c
-@@ -1209,6 +1209,48 @@
+@@ -1209,6 +1209,48 @@ static struct mtd_info * __init open_mtd
return mtd;
}
@@ -60,7 +60,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
static int __init ubi_init(void)
{
int err, i, k;
-@@ -1298,6 +1340,12 @@
+@@ -1298,6 +1340,12 @@ static int __init ubi_init(void)
}
}
diff --git a/target/linux/generic/patches-3.18/020-ssb_update.patch b/target/linux/generic/patches-3.18/020-ssb_update.patch
new file mode 100644
index 0000000000..9171b24704
--- /dev/null
+++ b/target/linux/generic/patches-3.18/020-ssb_update.patch
@@ -0,0 +1,78 @@
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -11,15 +11,17 @@
+ * Licensed under the GNU/GPL. See COPYING for details.
+ */
+
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+
+
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++ struct pci_dev *dev = to_pci_dev(d);
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+ return err;
+ pci_save_state(dev);
+ pci_disable_device(dev);
+- pci_set_power_state(dev, pci_choose_state(dev, state));
++
++ /* if there is a wakeup enabled child device on ssb bus,
++ enable pci wakeup posibility. */
++ device_set_wakeup_enable(d, d->power.wakeup_path);
++
++ pci_prepare_to_sleep(dev);
+
+ return 0;
+ }
+
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++ struct pci_dev *dev = to_pci_dev(d);
+ struct ssb_bus *ssb = pci_get_drvdata(dev);
+ int err;
+
+- pci_set_power_state(dev, PCI_D0);
++ pci_back_from_sleep(dev);
+ err = pci_enable_device(dev);
+ if (err)
+ return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+
+ return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend NULL
+-# define ssb_pcihost_resume NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++ SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+ const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+ driver->probe = ssb_pcihost_probe;
+ driver->remove = ssb_pcihost_remove;
+- driver->suspend = ssb_pcihost_suspend;
+- driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++ driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+
+ return pci_register_driver(driver);
+ }
diff --git a/target/linux/generic/patches-3.18/025-bcma_backport.patch b/target/linux/generic/patches-3.18/025-bcma_backport.patch
index 871791e871..07ceb037b7 100644
--- a/target/linux/generic/patches-3.18/025-bcma_backport.patch
+++ b/target/linux/generic/patches-3.18/025-bcma_backport.patch
@@ -8,21 +8,198 @@
int bcma_bus_register(struct bcma_bus *bus);
void bcma_bus_unregister(struct bcma_bus *bus);
int __init bcma_bus_early_register(struct bcma_bus *bus,
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+ return;
+ }
+
+- irq = bcma_core_irq(cc->core);
++ irq = bcma_core_irq(cc->core, 0);
+
+ /* Determine the registers of the UARTs */
+ cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
+ handle_simple_irq);
+ }
+
+- hwirq = bcma_core_irq(cc->core);
++ hwirq = bcma_core_irq(cc->core, 0);
+ err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+ cc);
+ if (err)
+@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
+ return;
+
+ bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+- free_irq(bcma_core_irq(cc->core), cc);
++ free_irq(bcma_core_irq(cc->core, 0), cc);
+ for (gpio = 0; gpio < chip->ngpio; gpio++) {
+ int irq = irq_find_mapping(cc->irq_domain, gpio);
+
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+ * If disabled, 5 is returned.
+ * If not supported, 6 is returned.
+ */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ struct bcma_device *mdev = dev->bus->drv_mips.core;
+ u32 irqflag;
+@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+ return 5;
+ }
+
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+- unsigned int mips_irq = bcma_core_mips_irq(dev);
+- return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+ unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+ break;
+ default:
+ list_for_each_entry(core, &bus->cores, list) {
+- core->irq = bcma_core_irq(core);
++ core->irq = bcma_core_irq(core, 0);
+ }
+ bcma_err(bus,
+ "Unknown device (0x%x) found, can not configure IRQs\n",
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+ pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+
+ /* Fix up interrupt lines */
+- dev->irq = bcma_core_irq(pc_host->pdev->core);
++ dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
+ pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+
+ readrq = pcie_get_readrq(dev);
+@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+
+ pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+ pci_ops);
+- return bcma_core_irq(pc_host->pdev->core);
++ return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
--- a/drivers/bcma/main.c
+++ b/drivers/bcma/main.c
-@@ -169,10 +169,8 @@ static void bcma_of_fill_device(struct p
+@@ -11,6 +11,7 @@
+ #include <linux/bcma/bcma.h>
+ #include <linux/slab.h>
+ #include <linux/of_address.h>
++#include <linux/of_irq.h>
+
+ MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+ MODULE_LICENSE("GPL");
+@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
+ return NULL;
+ }
+
++static int bcma_of_irq_parse(struct platform_device *parent,
++ struct bcma_device *core,
++ struct of_phandle_args *out_irq, int num)
++{
++ __be32 laddr[1];
++ int rc;
++
++ if (core->dev.of_node) {
++ rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++ if (!rc)
++ return rc;
++ }
++
++ out_irq->np = parent->dev.of_node;
++ out_irq->args_count = 1;
++ out_irq->args[0] = num;
++
++ laddr[0] = cpu_to_be32(core->addr);
++ return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ struct of_phandle_args out_irq;
++ int ret;
++
++ if (!parent || !parent->dev.of_node)
++ return 0;
++
++ ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++ if (ret) {
++ bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++ ret);
++ return 0;
++ }
++
++ return irq_create_of_mapping(&out_irq);
++}
++
+ static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+ {
+@@ -161,18 +202,47 @@ static void bcma_of_fill_device(struct p
+ node = bcma_of_find_child_device(parent, core);
+ if (node)
+ core->dev.of_node = node;
++
++ core->irq = bcma_of_get_irq(parent, core, 0);
+ }
+ #else
+ static void bcma_of_fill_device(struct platform_device *parent,
+ struct bcma_device *core)
+ {
}
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++ struct bcma_device *core, int num)
++{
++ return 0;
++}
#endif /* CONFIG_OF */
-static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
-+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
{
- int err;
--
++ struct bcma_bus *bus = core->bus;
++ unsigned int mips_irq;
++
++ switch (bus->hosttype) {
++ case BCMA_HOSTTYPE_PCI:
++ return bus->host_pci->irq;
++ case BCMA_HOSTTYPE_SOC:
++ if (bus->drv_mips.core && num == 0) {
++ mips_irq = bcma_core_mips_irq(core);
++ return mips_irq <= 4 ? mips_irq + 2 : 0;
++ }
++ if (bus->host_pdev)
++ return bcma_of_get_irq(bus->host_pdev, core, num);
++ return 0;
++ case BCMA_HOSTTYPE_SDIO:
++ return 0;
++ }
+
++ return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++{
core->dev.release = bcma_release_core_dev;
core->dev.bus = &bcma_bus_type;
dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-@@ -196,6 +194,11 @@ static void bcma_register_core(struct bc
+@@ -196,6 +266,11 @@ static void bcma_register_core(struct bc
case BCMA_HOSTTYPE_SDIO:
break;
}
@@ -44,3 +221,29 @@
bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
core->core_index, bcma_device_name(&core->id),
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define BCMA_DMA_TRANSLATION_DMA64_CMT 0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
+
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+ return 0;
+ }
--
GitLab