Commit 4c0430ef authored by blogic's avatar blogic

lantiq: vgv7519: backport vgv7519 dts

Signed-off-by: 's avatarEddi De Pieri <eddi@depieri.net>

git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42899 3c298f89-4303-0410-b956-a3cf2f4a3e73
parent ee1d74f2
......@@ -38,43 +38,41 @@
reg = <0xE100B10 0xA0>;
state_default: pinmux {
exin3 {
lantiq,groups = "exin3";
lantiq,function = "exin";
};
stp {
lantiq,groups = "stp";
lantiq,function = "stp";
};
spi {
lantiq,groups = "spi", "spi_cs4";
lantiq,groups = "spi";
lantiq,function = "spi";
};
mdio {
lantiq,groups = "mdio";
lantiq,function = "mdio";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
conf_out {
lantiq,pins = "io4", "io5", "io6", /* stp */
"io21",
"io33",
"io7", "io44"; /* Internal ethernet phy leds */
lantiq,open-drain;
gphy-leds_out {
lantiq,pins = "io7", "io44";
lantiq,pull = <0>;
lantiq,output = <1>;
};
pcie-rst {
lantiq,pins = "io38";
stp_out {
lantiq,pins = "io4", "io5", "io6";
lantiq,open-drain = <0>;
lantiq,output = <1>;
lantiq,pull = <0>;
};
pci-rst {
lantiq,pins = "io21";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
conf_in {
lantiq,pins = "io39"; /* exin3 */
lantiq,pull = <2>;
gphy-leds {
lantiq,groups = "gphy0 led1", "gphy1 led0";
lantiq,function = "gphy";
lantiq,open-drain = <0>;
lantiq,pull = <0>;
lantiq,output = <1>;
};
};
};
......@@ -146,27 +144,22 @@
phy0: ethernet-phy@0 {
reg = <0x0>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy1: ethernet-phy@1 {
reg = <0x1>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy5: ethernet-phy@5 {
reg = <0x5>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy11: ethernet-phy@11 {
reg = <0x11>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
phy13: ethernet-phy@13 {
reg = <0x13>;
compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
lantiq,c45-reg-init = <1 0 0 0>;
};
};
};
......@@ -192,10 +185,11 @@
};
pci@E105400 {
status = "okay";
#address-cells = <3>;
#size-cells = <2>;
#interrupt-cells = <1>;
compatible = "lantiq,pci-xway1";
compatible = "lantiq,pci-xway";
bus-range = <0x0 0x0>;
ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */
0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */
......@@ -209,7 +203,7 @@
interrupt-map = <
0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29
>;
gpios-reset = <&gpio 21 0>;
gpio-reset = <&gpio 21 0>;
req-mask = <0x1>; /* GNT1 */
};
};
......@@ -220,6 +214,11 @@
phys = [ 00 01 ];
};
ralink_eep {
compatible = "ralink,eeprom";
ralink,eeprom = "RT2860.eeprom";
};
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
......
......@@ -22,6 +22,12 @@
label = "rootfs_data";
reg = <0x880000 0x780000>;
};
partition@1f80000 {
label = "board_config";
reg = <0x40000 0x10000>;
read-only;
};
};
};
};
......
......@@ -30,6 +30,12 @@
// 0x1b0000 - 0x1000000 : rootfs (squashfs)
// 0x390000 - 0x1000000 : rootfs_data
};
partition@1f80000 {
label = "board_config";
reg = <0x40000 0x10000>;
read-only;
};
};
};
};
......
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment