Commit b24a61d6 authored by blogic's avatar blogic

add support for the NC-LINK SMART-300

Signed-off-by: default avatarImre Kaloz <kaloz@openwrt.org>

Backport of r42130

git-svn-id: svn://svn.openwrt.org/openwrt/branches/barrier_breaker@42393 3c298f89-4303-0410-b956-a3cf2f4a3e73
parent 6b5d417b
......@@ -160,6 +160,9 @@ get_status_led() {
rw2458n)
status_led="rw2458n:green:d3"
;;
smart-300)
status_led="nc-link:green:system"
;;
oolite)
status_led="oolite:red:system"
;;
......
......@@ -191,6 +191,15 @@ om5p)
ucidef_set_led_netdev "port2" "port2" "om5p:blue:lan" "eth1"
;;
smart-300)
ucidef_set_led_netdev "wan" "WAN" "nc-link:green:wan" "eth0"
ucidef_set_led_switch "lan1" "LAN1" "nc-link:green:lan1" "switch0" "0x04"
ucidef_set_led_switch "lan2" "LAN2" "nc-link:green:lan2" "switch0" "0x08"
ucidef_set_led_switch "lan3" "LAN3" "nc-link:green:lan3" "switch0" "0x10"
ucidef_set_led_switch "lan4" "LAN4" "nc-link:green:lan4" "switch0" "0x02"
ucidef_set_led_wlan "wlan" "WLAN" "nc-link:green:wlan" "phy0tpt"
;;
tew-712br)
ucidef_set_led_netdev "wan" "WAN" "trendnet:green:wan" "eth1"
ucidef_set_led_switch "lan1" "LAN1" "trendnet:green:lan1" "switch0" "0x02"
......
......@@ -200,6 +200,7 @@ tl-wr941nd)
ucidef_set_interfaces_lan_wan "lan1 lan2 lan3 lan4" "wan"
;;
smart-300 | \
tl-mr3420-v2 |\
tl-wr841n-v8 |\
tl-wr842n-v2 |\
......
......@@ -211,6 +211,9 @@ tplink_board_detect() {
"453000"*)
model="MERCURY MW4530R"
;;
"934100"*)
model="NC-LINK SMART-300"
;;
*)
hwver=""
;;
......@@ -517,6 +520,9 @@ ar71xx_board_detect() {
*RW2458N)
name="rw2458n"
;;
*"SMART-300")
name="smart-300"
;;
*TEW-632BRP)
name="tew-632brp"
;;
......
......@@ -27,6 +27,7 @@ set_preinit_iface() {
rb-450g |\
routerstation |\
routerstation-pro |\
smart-300 |\
tl-mr3420-v2 |\
tl-wdr4900-v2 |\
tl-wr1043nd-v2 |\
......
......@@ -258,6 +258,7 @@ platform_check_image() {
el-mini | \
gl-inet | \
oolite | \
smart-300 | \
tl-mr10u | \
tl-mr11u | \
tl-mr13u | \
......
......@@ -79,6 +79,7 @@ CONFIG_ATH79_MACH_PB92=y
# CONFIG_ATH79_MACH_RB95X is not set
# CONFIG_ATH79_MACH_RBSXTLITE is not set
CONFIG_ATH79_MACH_RW2458N=y
CONFIG_ATH79_MACH_SMART_300=y
CONFIG_ATH79_MACH_TEW_632BRP=y
CONFIG_ATH79_MACH_TEW_673GRU=y
CONFIG_ATH79_MACH_TEW_712BR=y
......
/*
* NC-LINK SMART-300 board support
*
* Copyright (C) 2012 Gabor Juhos <juhosg@openwrt.org>
* Copyright (C) 2014 Imre Kaloz <kaloz@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <asm/mach-ath79/ath79.h>
#include <asm/mach-ath79/ar71xx_regs.h>
#include <asm/mach-ath79/ag71xx_platform.h>
#include "common.h"
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "dev-wmac.h"
#include "machtypes.h"
#define SMART_300_GPIO_LED_WLAN 13
#define SMART_300_GPIO_LED_WAN 18
#define SMART_300_GPIO_LED_LAN4 19
#define SMART_300_GPIO_LED_LAN3 12
#define SMART_300_GPIO_LED_LAN2 21
#define SMART_300_GPIO_LED_LAN1 20
#define SMART_300_GPIO_LED_SYSTEM 15
#define SMART_300_GPIO_LED_POWER 14
#define SMART_300_GPIO_BTN_RESET 17
#define SMART_300_GPIO_SW_RFKILL 16
#define SMART_300_KEYS_POLL_INTERVAL 20 /* msecs */
#define SMART_300_KEYS_DEBOUNCE_INTERVAL (3 * SMART_300_KEYS_POLL_INTERVAL)
#define SMART_300_GPIO_MASK 0x007fffff
static const char *smart_300_part_probes[] = {
"tp-link",
NULL,
};
static struct flash_platform_data smart_300_flash_data = {
.part_probes = smart_300_part_probes,
};
static struct gpio_led smart_300_leds_gpio[] __initdata = {
{
.name = "nc-link:green:lan1",
.gpio = SMART_300_GPIO_LED_LAN1,
.active_low = 1,
}, {
.name = "nc-link:green:lan2",
.gpio = SMART_300_GPIO_LED_LAN2,
.active_low = 1,
}, {
.name = "nc-link:green:lan3",
.gpio = SMART_300_GPIO_LED_LAN3,
.active_low = 1,
}, {
.name = "nc-link:green:lan4",
.gpio = SMART_300_GPIO_LED_LAN4,
.active_low = 1,
}, {
.name = "nc-link:green:system",
.gpio = SMART_300_GPIO_LED_SYSTEM,
.active_low = 1,
}, {
.name = "nc-link:green:wan",
.gpio = SMART_300_GPIO_LED_WAN,
.active_low = 1,
}, {
.name = "nc-link:green:wlan",
.gpio = SMART_300_GPIO_LED_WLAN,
.active_low = 1,
},
};
static struct gpio_keys_button smart_300_gpio_keys[] __initdata = {
{
.desc = "reset",
.type = EV_KEY,
.code = KEY_RESTART,
.debounce_interval = SMART_300_KEYS_DEBOUNCE_INTERVAL,
.gpio = SMART_300_GPIO_BTN_RESET,
.active_low = 1,
}
};
static void __init smart_300_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00);
u8 *ee = (u8 *) KSEG1ADDR(0x1fff1000);
ath79_register_leds_gpio(-1, ARRAY_SIZE(smart_300_leds_gpio),
smart_300_leds_gpio);
ath79_register_gpio_keys_polled(1, SMART_300_KEYS_POLL_INTERVAL,
ARRAY_SIZE(smart_300_gpio_keys),
smart_300_gpio_keys);
ath79_register_m25p80(&smart_300_flash_data);
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_SW_ONLY_MODE);
ath79_register_mdio(1, 0x0);
ath79_init_mac(ath79_eth0_data.mac_addr, mac, -1);
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
/* GMAC0 is connected to the PHY0 of the internal switch */
ath79_switch_data.phy4_mii_en = 1;
ath79_switch_data.phy_poll_mask = BIT(4);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
ath79_eth0_data.phy_mask = BIT(4);
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
ath79_register_eth(0);
/* GMAC1 is connected to the internal switch */
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
ath79_register_eth(1);
ath79_register_wmac(ee, mac);
gpio_request(SMART_300_GPIO_LED_POWER, "power");
gpio_direction_output(SMART_300_GPIO_LED_POWER, GPIOF_OUT_INIT_LOW);
}
MIPS_MACHINE(ATH79_MACH_SMART_300, "SMART-300", "NC-LINK SMART-300",
smart_300_setup);
#
# Copyright (C) 2014 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
#
define Profile/SMART-300
NAME:=NC-LINK SMART-300
endef
define Profile/SMART-300/Description
Package set optimized for the NC-LINK SMART-300.
endef
$(eval $(call Profile,SMART-300))
......@@ -1226,6 +1226,8 @@ $(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4310V1,tl-wdr4310-v1,TL-WDR4
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,TLWDR4900V2,tl-wdr4900-v2,TL-WDR4900-v2,ttyS0,115200,0x49000002,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,MW4530RV1,mw4530r-v1,TL-WDR4300,ttyS0,115200,0x45300001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,SMART-300,smart-300,SMART-300,ttyS0,115200,0x93410001,1,8Mlzma))
$(eval $(call SingleProfile,TPLINK-LZMA,64kraw,OOLITE,oolite,GS-OOLITE,ttyATH0,115200,0x3C000101,1,16Mlzma))
$(eval $(call SingleProfile,UAPPRO,64k,UAPPRO,ubnt-uap-pro,UAP-PRO,ttyS0,115200,BZ,BZ,ar934x))
......
--- a/arch/mips/ath79/machtypes.h
+++ b/arch/mips/ath79/machtypes.h
@@ -103,6 +103,7 @@ enum ath79_mach_type {
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
ATH79_MACH_RW2458N, /* Redwave RW2458N */
+ ATH79_MACH_SMART_300, /* NC-LINK SMART-300 */
ATH79_MACH_TEW_632BRP, /* TRENDnet TEW-632BRP */
ATH79_MACH_TEW_673GRU, /* TRENDnet TEW-673GRU */
ATH79_MACH_TEW_712BR, /* TRENDnet TEW-712BR */
--- a/arch/mips/ath79/Kconfig
+++ b/arch/mips/ath79/Kconfig
@@ -518,6 +518,15 @@ config ATH79_MACH_RBSXTLITE
select ATH79_DEV_WMAC
select ATH79_ROUTERBOOT
+config ATH79_MACH_SMART_300
+ bool "NC-LINK SMART-300 board support"
+ select SOC_AR934X
+ select ATH79_DEV_ETH
+ select ATH79_DEV_GPIO_BUTTONS
+ select ATH79_DEV_LEDS_GPIO
+ select ATH79_DEV_M25P80
+ select ATH79_DEV_WMAC
+
config ATH79_MACH_WNDAP360
bool "NETGEAR WNDAP360 board support"
select SOC_AR71XX
--- a/arch/mips/ath79/Makefile
+++ b/arch/mips/ath79/Makefile
@@ -92,6 +92,7 @@ obj-$(CONFIG_ATH79_MACH_RB95X) += mach-
obj-$(CONFIG_ATH79_MACH_RB2011) += mach-rb2011.o
obj-$(CONFIG_ATH79_MACH_RBSXTLITE) += mach-rbsxtlite.o
obj-$(CONFIG_ATH79_MACH_RW2458N) += mach-rw2458n.o
+obj-$(CONFIG_ATH79_MACH_SMART_300) += mach-smart-300.o
obj-$(CONFIG_ATH79_MACH_TEW_632BRP) += mach-tew-632brp.o
obj-$(CONFIG_ATH79_MACH_TEW_673GRU) += mach-tew-673gru.o
obj-$(CONFIG_ATH79_MACH_TEW_712BR) += mach-tew-712br.o
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment