Skip to content
Snippets Groups Projects

Compare revisions

Changes are shown as if the source revision was being merged into the target revision. Learn more about comparing revisions.

Source

Select target project
No results found

Target

Select target project
  • nounous-archives/openwrt-barrier-breaker
  • colisson/openwrt-barrier-breaker
  • serrano/openwrt-barrier-breaker
3 results
Show changes
Commits on Source (173)
Showing
with 317 additions and 34 deletions
......@@ -3,8 +3,8 @@ This is the buildsystem for the OpenWrt Linux distribution.
Please use "make menuconfig" to configure your appreciated
configuration for the toolchain and firmware.
You need to have installed gcc, binutils, bzip2, flex, python, perl
make, find, grep, diff, unzip, gawk, getopt, libz-dev and libc headers.
You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.
Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
......
src-git packages https://github.com/openwrt/packages.git;for-14.07
src-git luci http://git.openwrt.org/project/luci.git
src-git luci https://github.com/openwrt/luci.git;luci-0.12
src-git routing https://github.com/openwrt-routing/packages.git;for-14.07
src-git telephony http://git.openwrt.org/feed/telephony.git;for-14.07
src-git management https://github.com/openwrt-management/packages.git;for-14.07
src-git oldpackages http://git.openwrt.org/packages.git^95ba3e7d7bce60f9b3d6c6e8fc0934a6af8a4e34
src-git oldpackages http://git.openwrt.org/14.07/packages.git
#src-svn xwrt http://x-wrt.googlecode.com/svn/trunk/package
#src-svn phone svn://svn.openwrt.org/openwrt/feeds/phone
#src-svn efl svn://svn.openwrt.org/openwrt/feeds/efl
......
......@@ -2,20 +2,20 @@
LINUX_RELEASE?=1
ifeq ($(LINUX_VERSION),3.10.49)
LINUX_KERNEL_MD5SUM:=9774e12764e740d49c80eda77d0ef3eb
endif
LINUX_VERSION-3.10 = .49
# disable the md5sum check for unknown kernel versions
LINUX_KERNEL_MD5SUM?=x
LINUX_KERNEL_MD5SUM-3.10.49 = 9774e12764e740d49c80eda77d0ef3eb
ifdef KERNEL_PATCHVER
LINUX_VERSION:=$(KERNEL_PATCHVER)$(strip $(LINUX_VERSION-$(KERNEL_PATCHVER)))
endif
split_version=$(subst ., ,$(1))
merge_version=$(subst $(space),.,$(1))
KERNEL_BASE=$(firstword $(subst -, ,$(LINUX_VERSION)))
KERNEL=$(call merge_version,$(wordlist 1,2,$(call split_version,$(KERNEL_BASE))))
ifeq ($(firstword $(call split_version,$(KERNEL_BASE))),2)
KERNEL_PATCHVER=$(call merge_version,$(wordlist 1,3,$(call split_version,$(KERNEL_BASE))))
else
KERNEL_PATCHVER=$(KERNEL)
endif
KERNEL_PATCHVER ?= $(KERNEL)
# disable the md5sum check for unknown kernel versions
LINUX_KERNEL_MD5SUM:=$(LINUX_KERNEL_MD5SUM-$(strip $(LINUX_VERSION)))
LINUX_KERNEL_MD5SUM?=x
LTQ_TAPI_BUILD_DEPENDS:=TARGET_lantiq_xway:kmod-ltq-tapi \
TARGET_lantiq_xway:kmod-ltq-vmmc \
TARGET_lantiq_xrx200:kmod-ltq-tapi \
TARGET_lantiq_xrx200:kmod-ltq-vmmc \
TARGET_lantiq_falcon:kmod-ltq-tapi \
TARGET_lantiq_falcon:kmod-ltq-vmmc
LTQ_TAPI_TARGET:=@(TARGET_lantiq_falcon||TARGET_lantiq_xway)
LTQ_TAPI_TARGET:=@(TARGET_lantiq_falcon||TARGET_lantiq_xway||TARGET_lantiq_xrx200)
LTQ_TAPI_DEPENDS:=$(LTQ_TAPI_TARGET) \
+TARGET_lantiq_xway:kmod-ltq-tapi \
+TARGET_lantiq_xway:kmod-ltq-vmmc \
+TARGET_lantiq_xrx200:kmod-ltq-tapi \
+TARGET_lantiq_xrx200:kmod-ltq-vmmc \
+TARGET_lantiq_falcon:kmod-ltq-tapi \
+TARGET_lantiq_falcon:kmod-ltq-vmmc
......@@ -18,16 +18,16 @@ PKG_CONFIG_DEPENDS += \
CONFIG_VERSION_HWREV \
VERSION_NUMBER:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),$(REVISION))
VERSION_NUMBER:=$(if $(VERSION_NUMBER),$(VERSION_NUMBER),14.07)
VERSION_CODE:=$(call qstrip,$(CONFIG_VERSION_NUMBER))
VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),14.07)
VERSION_CODE:=$(if $(VERSION_CODE),$(VERSION_CODE),Barrier Breaker)
VERSION_NICK:=$(call qstrip,$(CONFIG_VERSION_NICK))
VERSION_NICK:=$(if $(VERSION_NICK),$(VERSION_NICK),$(RELEASE))
VERSION_REPO:=$(call qstrip,$(CONFIG_VERSION_REPO))
VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.openwrt.org/snapshots/trunk/%T/packages)
VERSION_REPO:=$(if $(VERSION_REPO),$(VERSION_REPO),http://downloads.openwrt.org/%n/%v/%S/packages)
VERSION_DIST:=$(call qstrip,$(CONFIG_VERSION_DIST))
VERSION_DIST:=$(if $(VERSION_DIST),$(VERSION_DIST),OpenWrt)
......
......@@ -12,8 +12,6 @@ validate_system_section()
'buffersize:uinteger' \
'timezone:string:UTC' \
'zonename:string'
return $?
}
system_config() {
......
......@@ -4,6 +4,7 @@ net.ipv4.conf.all.arp_ignore=1
net.ipv4.ip_forward=1
net.ipv4.icmp_echo_ignore_broadcasts=1
net.ipv4.icmp_ignore_bogus_error_responses=1
net.ipv4.igmp_max_memberships=100
net.ipv4.tcp_ecn=0
net.ipv4.tcp_fin_timeout=30
net.ipv4.tcp_keepalive_time=120
......
......@@ -4,6 +4,7 @@
/etc/group
/etc/passwd
/etc/profile
/etc/shadow
/etc/shells
/etc/sysctl.conf
/etc/rc.local
......@@ -211,7 +211,7 @@ endif
menuconfig PER_FEED_REPO
bool "Separate feed repositories" if IMAGEOPT
default n
default y
help
If set, a separate repository is generated within bin/*/packages/
for the core packages and each enabled feed.
......
......@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
PKG_NAME:=binutils
PKG_VERSION:=2.24
PKG_RELEASE:=1
PKG_RELEASE:=2
PKG_SOURCE_URL:=@GNU/binutils
PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
......@@ -48,6 +48,7 @@ endef
TARGET_CFLAGS += $(FPIC)
CONFIGURE_ARGS += \
--enable-shared \
--enable-install-libiberty \
--enable-install-libbfd
......@@ -67,6 +68,8 @@ endef
define Package/objdump/install
$(INSTALL_DIR) $(1)/usr/bin $(1)/usr/lib
$(CP) $(PKG_INSTALL_DIR)/usr/bin/objdump $(1)/usr/bin/
$(CP) $(PKG_INSTALL_DIR)/usr/lib/libopcodes*.so $(1)/usr/lib/
$(CP) $(PKG_INSTALL_DIR)/usr/lib/libbfd*.so $(1)/usr/lib/
endef
define Package/binutils/install
......
......@@ -77,7 +77,7 @@ define Package/valgrind/description
to speed up and reduce memory use of your programs.
endef
CPU := $(patsubst x86_64,amd64,$(patsubst x86,i386,$(LINUX_KARCH)))
CPU := $(patsubst x86_64,amd64,$(patsubst x86,i386,$(patsubst um,$(ARCH),$(LINUX_KARCH))))
CONFIGURE_VARS += \
UNAME_R=$(LINUX_VERSION)
......
......@@ -8,13 +8,13 @@ include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
PKG_NAME:=brcm2708-gpu-fw
PKG_REV:=94e1b8014dfa69701d0432088acb11ae01130d38
PKG_REV:=e25efc4545d0cef7c49c82e770b3e4ccfc8aba4c
PKG_VERSION:=20140226
PKG_RELEASE:=1
PKG_SOURCE:=$(PKG_REV).tar.gz
PKG_SOURCE_URL:=https://github.com/Hexxeh/rpi-firmware/archive/
PKG_MD5SUM:=41fab917f6cda3ea74f127293ed1e8ce
PKG_MD5SUM:=b1bb6b1063c4f920314274edd39c35e6
PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)/rpi-firmware-$(PKG_REV)
......
......@@ -450,7 +450,8 @@ detect_broadcom() {
config wifi-device wl${i}
option type broadcom
option channel ${channel:-11}
option txantenna 3
option rxantenna 3
# REMOVE THIS LINE TO ENABLE WIFI:
option disabled 1
......
......@@ -27,7 +27,8 @@ define KernelPackage/ltq-tapi
SUBMENU:=Voice over IP
TITLE:=Lantiq TAPI subsystem
URL:=http://www.lantiq.com/
DEPENDS:=$(LTQ_TAPI_TARGET) +kmod-ltq-ifxos
#DEPENDS:=$(LTQ_TAPI_TARGET) +kmod-ltq-ifxos
DEPENDS:=+kmod-ltq-ifxos
FILES:=$(PKG_BUILD_DIR)/src/drv_tapi.ko
AUTOLOAD:=$(call AutoLoad,20,drv_tapi)
endef
......
......@@ -13,10 +13,10 @@ choice
# bool "AR9 family"
# depends on TARGET_lantiq_ar9
# config VOICE_CPE_VMMC_WITH_DEVICE_VR9
# bool "VR9 family"
# depends on TARGET_lantiq_vr9
#
config VOICE_CPE_VMMC_WITH_DEVICE_VR9
bool "VR9 family"
depends on TARGET_lantiq_xrx200
config VOICE_VMMC_WITH_DEVICE_FALCON
bool "FALC-ON"
depends on (TARGET_lantiq_falcon||TARGET_lantiq_falcon_stable)
......
......@@ -120,7 +120,19 @@ endif
ifeq ($(CONFIG_VOICE_CPE_VMMC_WITH_DEVICE_VR9),y)
CONFIGURE_ARGS += --with-device=VR9
# TODO: add fw/coef
FW_TARGET:=voice_ar9_firmware.bin
FW_SOURCE:=voip_R2.3.1.7.0-enc.bin
FW_FILE=fw_voip_vr9-2.3.1.7.0.tar.gz
FW_MD5SUM:=635edd1e2af8ca249cc7e80b779f3270
FW_DOWNLOAD:=1
COEF_SRC:=ETSI_3_10.BIN
COEF_TARGET:=vr9_bbd_fxs.bin
COEF_FILE:=coef_voip_vr9-0.9.3.tar.gz
COEF_MD5SUM:=66fa5c6a4110726b1f8658359b8008e6
COEF_DOWNLOAD:=1
COEF_SRC_FXO:=FXO_ETSI_0_0.BIN
COEF_TARGET_FXO:=vr9_bbd.bin
endif
define Download/firmware
......@@ -163,6 +175,7 @@ define KernelPackage/ltq-vmmc/install
$(CP) $(PKG_BUILD_DIR)/firmware/$(FW_SOURCE) $(1)/$(FW_DIR)/$(FW_TARGET)
ln -s /$(FW_DIR)/$(FW_TARGET) $(1)/$(FW_DIR)/$(FW_TARGET_GENERIC)
$(CP) $(PKG_BUILD_DIR)/coef/$(COEF_SRC) $(1)/$(FW_DIR)/$(COEF_TARGET)
$(CP) $(PKG_BUILD_DIR)/coef/$(COEF_SRC_FXO) $(1)/$(FW_DIR)/$(COEF_TARGET_FXO)
ln -s /$(FW_DIR)/$(COEF_TARGET) $(1)/$(FW_DIR)/$(COEF_TARGET_GENERIC)
endef
......
--- drv_vmmc-1.9.0_orig/src/mps/drv_mps_vmmc_ar9.c 2010-03-08 14:08:30.000000000 +0100
+++ drv_vmmc-1.9.0/src/mps/drv_mps_vmmc_ar9.c 2014-10-14 21:49:20.000000000 +0200
@@ -30,15 +30,24 @@
#include "ifxos_interrupt.h"
/* board specific headers */
+#if !defined CONFIG_LANTIQ
#include <asm/ifx/ifx_regs.h>
#include <asm/ifx_vpe.h>
#include <asm/ifx/ifx_gpio.h>
+#endif
+
+#include <lantiq_soc.h>
+#include <vpe.h>
/* device specific headers */
#include "drv_mps_vmmc.h"
#include "drv_mps_vmmc_dbg.h"
#include "drv_mps_vmmc_device.h"
+const void (*ifx_bsp_basic_mps_decrypt)(unsigned int addr, int n) = NULL;
+
+#define IFX_MPS_SRAM IFXMIPS_MPS_SRAM
+
/* ============================= */
/* Local Macros & Definitions */
/* ============================= */
@@ -108,6 +108,7 @@
*/
IFX_int32_t ifx_mps_fw_wdog_start_ar9()
{
+ return IFX_SUCCESS; /* FIXME - Disable start wdog... */
/* vpe1_wdog_ctr should be set up in u-boot as
"vpe1_wdog_ctr_addr=0xBF2001B0"; protection from incorrect or missing
setting */
@@ -292,7 +302,19 @@
decryption. Subtract sizeof(u32) from length to avoid decryption
of data beyond the FW image code */
pFWDwnld->length -= sizeof(IFX_uint32_t);
+ switch(ltq_soc_type()) {
+ case SOC_TYPE_AR9:
+ ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf0017c4;
+ break;
+ case SOC_TYPE_VR9:
+ ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001ea4;
+ break;
+ case SOC_TYPE_VR9_2:
+ ifx_bsp_basic_mps_decrypt = (const void (*)(unsigned int, int))0xbf001f38;
+ break;
+ }
+ if (ifx_bsp_basic_mps_decrypt)
ifx_bsp_basic_mps_decrypt((IFX_uint32_t)cpu1_base_addr, pFWDwnld->length);
}
/* calculate CRC32 checksum over downloaded image */
@@ -306,7 +320,7 @@
TRACE (MPS, DBG_LEVEL_HIGH,
("MPS: FW checksum error: img=0x%08x calc=0x%08x\r\n",
pFW_img_data->crc32, cksum));
- return IFX_ERROR;
+ /* return IFX_ERROR; -- FIXME */
}
}
else
@@ -454,62 +473,62 @@
#endif /* DEBUG */
/* reset SmartSLIC */
- IFXOS_LOCKINT (flags);
- if (ifx_gpio_pin_reserve
- (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
- {
- TRACE (MPS, DBG_LEVEL_HIGH,
- (KERN_ERR "[%s %s %d]: GPIO port/pin reservation error.\r\n",
- __FILE__, __func__, __LINE__));
- }
+// IFXOS_LOCKINT (flags);
+// if (ifx_gpio_pin_reserve
+// (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
+// {
+// TRACE (MPS, DBG_LEVEL_HIGH,
+// (KERN_ERR "[%s %s %d]: GPIO port/pin reservation error.\r\n",
+// __FILE__, __func__, __LINE__));
+// }
/* P1_ALTSEL0.15 = 0 */
- if (ifx_gpio_altsel0_clear
- (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
- {
- TRACE (MPS, DBG_LEVEL_HIGH,
- (KERN_ERR "[%s %s %d]: GPIO error clearing ALTSEL0.\r\n", __FILE__,
- __func__, __LINE__));
- }
+// if (ifx_gpio_altsel0_clear
+// (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
+// {
+// TRACE (MPS, DBG_LEVEL_HIGH,
+// (KERN_ERR "[%s %s %d]: GPIO error clearing ALTSEL0.\r\n", __FILE__,
+// __func__, __LINE__));
+// }
/* P1_ALTSEL1.15 = 0 */
- if (ifx_gpio_altsel1_clear
- (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
- {
- TRACE (MPS, DBG_LEVEL_HIGH,
- (KERN_ERR "[%s %s %d]: GPIO error clearing ALTSEL1.\r\n", __FILE__,
- __func__, __LINE__));
- }
+// if (ifx_gpio_altsel1_clear
+// (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
+// {
+// TRACE (MPS, DBG_LEVEL_HIGH,
+// (KERN_ERR "[%s %s %d]: GPIO error clearing ALTSEL1.\r\n", __FILE__,
+// __func__, __LINE__));
+// }
/* P1_DIR.15 = 1 */
- if (ifx_gpio_dir_out_set
- (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
- {
- TRACE (MPS, DBG_LEVEL_HIGH,
- (KERN_ERR "[%s %s %d]: GPIO error setting DIR.\r\n", __FILE__,
- __func__, __LINE__));
- }
+// if (ifx_gpio_dir_out_set
+// (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
+// {
+// TRACE (MPS, DBG_LEVEL_HIGH,
+// (KERN_ERR "[%s %s %d]: GPIO error setting DIR.\r\n", __FILE__,
+// __func__, __LINE__));
+// }
/* P1_OD.15 = 1 */
- if (ifx_gpio_open_drain_set
- (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
- {
- TRACE (MPS, DBG_LEVEL_HIGH,
- (KERN_ERR "[%s %s %d]: GPIO error setting OD.\r\n", __FILE__,
- __func__, __LINE__));
- }
+// if (ifx_gpio_open_drain_set
+// (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
+// {
+// TRACE (MPS, DBG_LEVEL_HIGH,
+// (KERN_ERR "[%s %s %d]: GPIO error setting OD.\r\n", __FILE__,
+// __func__, __LINE__));
+// }
/* P1_OUT.15 = 0 */
- if (ifx_gpio_output_clear
- (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
- {
- TRACE (MPS, DBG_LEVEL_HIGH,
- (KERN_ERR "[%s %s %d]: GPIO error clearing OUT.\r\n", __FILE__,
- __func__, __LINE__));
- }
- if (ifx_gpio_pin_free
- (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
- {
- TRACE (MPS, DBG_LEVEL_HIGH,
- (KERN_ERR "[%s %s %d]: GPIO port/pin freeing error.\r\n", __FILE__,
- __func__, __LINE__));
- }
- IFXOS_UNLOCKINT (flags);
+// if (ifx_gpio_output_clear
+// (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
+// {
+// TRACE (MPS, DBG_LEVEL_HIGH,
+// (KERN_ERR "[%s %s %d]: GPIO error clearing OUT.\r\n", __FILE__,
+// __func__, __LINE__));
+// }
+// if (ifx_gpio_pin_free
+// (IFX_GPIO_PIN_ID (SSLIC_RST_PORT, SSLIC_RST_PIN), IFX_MPS_MODULE_ID))
+// {
+// TRACE (MPS, DBG_LEVEL_HIGH,
+// (KERN_ERR "[%s %s %d]: GPIO port/pin freeing error.\r\n", __FILE__,
+// __func__, __LINE__));
+// }
+// IFXOS_UNLOCKINT (flags);
/* recalculate and compare the firmware checksum */
ifx_mps_fw_crc_compare(cpu1_base_addr, pFW_img_data);
--- drv_vmmc-1.9.0_orig/src/drv_vmmc_amazon_s.h 2009-12-03 17:20:34.000000000 +0100
+++ drv_vmmc-1.9.0/src/drv_vmmc_amazon_s.h 2014-10-16 10:30:48.000000000 +0200
@@ -16,7 +16,7 @@
#if defined(SYSTEM_AR9) || defined(SYSTEM_VR9)
-#include <asm/ifx/ifx_gpio.h>
+//#include <asm/ifx/ifx_gpio.h>
#else
#error no system selected
#endif
@@ -27,45 +27,6 @@
*/
#define VMMC_PCM_IF_CFG_HOOK(mode, GPIOreserved, ret) \
do { \
- ret = VMMC_statusOk; \
- /* Reserve P0.0 as TDM/FSC */ \
- if (!GPIOreserved) \
- ret |= ifx_gpio_pin_reserve(IFX_GPIO_PIN_ID(0, 0), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel0_set(IFX_GPIO_PIN_ID(0, 0), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel1_set(IFX_GPIO_PIN_ID(0, 0), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_open_drain_set(IFX_GPIO_PIN_ID(0, 0), VMMC_TAPI_GPIO_MODULE_ID);\
- \
- /* Reserve P1.9 as TDM/DO */ \
- if (!GPIOreserved) \
- ret |= ifx_gpio_pin_reserve(IFX_GPIO_PIN_ID(1, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel0_set(IFX_GPIO_PIN_ID(1, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel1_clear(IFX_GPIO_PIN_ID(1, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_dir_out_set(IFX_GPIO_PIN_ID(1, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_open_drain_set(IFX_GPIO_PIN_ID(1, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- \
- /* Reserve P2.9 as TDM/DI */ \
- if (!GPIOreserved) \
- ret |= ifx_gpio_pin_reserve(IFX_GPIO_PIN_ID(2, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel0_clear(IFX_GPIO_PIN_ID(2, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel1_set(IFX_GPIO_PIN_ID(2, 9), VMMC_TAPI_GPIO_MODULE_ID);\
- ret |= ifx_gpio_dir_in_set(IFX_GPIO_PIN_ID(2, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- \
- /* Reserve P2.8 as TDM/DCL */ \
- if (!GPIOreserved) \
- ret |= ifx_gpio_pin_reserve(IFX_GPIO_PIN_ID(2, 8), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel0_clear(IFX_GPIO_PIN_ID(2, 8), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_altsel1_set(IFX_GPIO_PIN_ID(2, 8), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_open_drain_set(IFX_GPIO_PIN_ID(2, 8), VMMC_TAPI_GPIO_MODULE_ID); \
- \
- if (mode == 2) { \
- /* TDM/FSC+DCL Master */ \
- ret |= ifx_gpio_dir_out_set(IFX_GPIO_PIN_ID(0, 0), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_dir_out_set(IFX_GPIO_PIN_ID(2, 8), VMMC_TAPI_GPIO_MODULE_ID); \
- } else { \
- /* TDM/FSC+DCL Slave */ \
- ret |= ifx_gpio_dir_in_set(IFX_GPIO_PIN_ID(0, 0), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_dir_in_set(IFX_GPIO_PIN_ID(2, 8), VMMC_TAPI_GPIO_MODULE_ID); \
- } \
} while(0);
/**
@@ -73,11 +34,6 @@
*/
#define VMMC_DRIVER_UNLOAD_HOOK(ret) \
do { \
- ret = VMMC_statusOk; \
- ret |= ifx_gpio_pin_free(IFX_GPIO_PIN_ID(0, 0), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_pin_free(IFX_GPIO_PIN_ID(1, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_pin_free(IFX_GPIO_PIN_ID(2, 9), VMMC_TAPI_GPIO_MODULE_ID); \
- ret |= ifx_gpio_pin_free(IFX_GPIO_PIN_ID(2, 8), VMMC_TAPI_GPIO_MODULE_ID); \
} while (0)
#endif /* _DRV_VMMC_AMAZON_S_H */
......@@ -328,7 +328,7 @@ endef
define KernelPackage/rt2800-soc
$(call KernelPackage/rt2x00/Default)
DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883) +kmod-rt2800-mmio +kmod-rt2800-lib
DEPENDS += @(TARGET_ramips_rt288x||TARGET_ramips_rt305x||TARGET_ramips_rt3883||TARGET_ramips_mt7620a||TARGET_ramips_mt7620n) +kmod-rt2800-mmio +kmod-rt2800-lib
TITLE += (RT28xx/RT3xxx SoC)
FILES := \
$(PKG_BUILD_DIR)/drivers/net/wireless/rt2x00/rt2x00soc.ko \
......
......@@ -6,7 +6,7 @@ country 00:
# Channel 14. Only JP enables this and for 802.11b only
(2474 - 2494 @ 20), (20), NO-IR, NO-OFDM
# Channel 36 - 48
(5170 - 5250 @ 160), (20), NO-IR
(5170 - 5250 @ 160), (20)
# Channel 52 - 64
(5250 - 5330 @ 160), (20), NO-IR, DFS
# Channel 100 - 144
......
--- a/net/mac80211/iface.c
+++ b/net/mac80211/iface.c
@@ -1796,7 +1796,11 @@ void ieee80211_remove_interfaces(struct
}
mutex_unlock(&local->iflist_mtx);
unregister_netdevice_many(&unreg_list);
+#if (!(LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,45) && \
+ LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0)) && \
+ (LINUX_VERSION_CODE < KERNEL_VERSION(3,16,0)))
list_del(&unreg_list);
+#endif
list_for_each_entry_safe(sdata, tmp, &wdev_list, list) {
list_del(&sdata->list);