kernel: add CAN modules

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Luka Perkov <luka@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@39032 3c298f89-4303-0410-b956-a3cf2f4a3e73

package/kernel/linux/modules/can.mk

+#
+# Copyright (C) 2013 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+CAN_MENU:=CAN Support
+
+define KernelPackage/can
+  SUBMENU:=$(CAN_MENU)
+  TITLE:=CAN bus support
+  KCONFIG:=\
+	CONFIG_CAN=y \
+	CONFIG_CAN_DEV \
+	CONFIG_CAN_CALC_BITTIMING=y \
+	CONFIG_CAN_LEDS=y \
+	CONFIG_CAN_AT91=n \
+	CONFIG_CAN_TI_HECC=n \
+	CONFIG_CAN_MCP251X=n \
+	CONFIG_CAN_BFIN=n \
+	CONFIG_CAN_JANZ_ICAN3=n \
+	CONFIG_PCH_CAN=n \
+	CONFIG_CAN_GRCAN=n \
+	CONFIG_CAN_CC770=n \
+	CONFIG_CAN_C_CAN=n \
+	CONFIG_CAN_MSCAN=n \
+	CONFIG_CAN_SJA1000=n \
+	CONFIG_CAN_SOFTING=n \
+	CONFIG_NET_EMATCH_CANID=n \
+	CONFIG_CAN_DEBUG_DEVICES=n
+  FILES:=$(LINUX_DIR)/drivers/net/can/can-dev.ko
+  AUTOLOAD:=$(call AutoProbe,can-dev)
+endef
+
+define KernelPackage/can/description
+ Kernel module for CAN bus support.
+endef
+
+$(eval $(call KernelPackage,can))
+
+
+define AddDepends/can
+  SUBMENU:=$(CAN_MENU)
+  DEPENDS+=kmod-can $(1)
+endef
+
+
+define KernelPackage/can-raw
+  TITLE:=Raw CAN Protcol
+  KCONFIG:=CONFIG_CAN_RAW
+  FILES:=$(LINUX_DIR)/net/can/can-raw.ko
+  AUTOLOAD:=$(call AutoProbe,can-raw)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-raw/description
+ The raw CAN protocol option offers access to the CAN bus via
+ the BSD  socket API.
+endef
+
+$(eval $(call KernelPackage,can-raw))
+
+
+define KernelPackage/can-bcm
+  TITLE:=Broadcast Manager CAN Protcol
+  KCONFIG:=CONFIG_CAN_BCM
+  FILES:=$(LINUX_DIR)/net/can/can-bcm.ko
+  AUTOLOAD:=$(call AutoProbe,can-bcm)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-bcm/description
+ The Broadcast Manager offers content filtering, timeout monitoring,
+ sending of RTR frames, and cyclic CAN messages without permanent user
+ interaction.
+endef
+
+$(eval $(call KernelPackage,can-bcm))
+
+
+define KernelPackage/can-gw
+  TITLE:=CAN Gateway/Router
+  KCONFIG:=CONFIG_CAN_GW
+  FILES:=$(LINUX_DIR)/net/can/can-gw.ko
+  AUTOLOAD:=$(call AutoProbe,can-gw)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-gw/description
+ The CAN Gateway/Router is used to route (and modify) CAN frames.
+endef
+
+$(eval $(call KernelPackage,can-gw))
+
+
+define KernelPackage/can-vcan
+  TITLE:=Virtual Local CAN Interface (vcan)
+  KCONFIG:=CONFIG_CAN_VCAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/vcan.ko
+  AUTOLOAD:=$(call AutoProbe,vcan)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-vcan/description
+ Similar to the network loopback devices, vcan offers a
+ virtual local CAN interface.
+endef
+
+$(eval $(call KernelPackage,can-vcan))
+
+
+define KernelPackage/can-slcan
+  TITLE:=Serial / USB serial CAN Adaptors (slcan)
+  KCONFIG:=CONFIG_CAN_SLCAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/slcan.ko
+  AUTOLOAD:=$(call AutoProbe,slcan)
+  $(call AddDepends/can)
+endef
+
+define KernelPackage/can-slcan/description
+ CAN driver for several 'low cost' CAN interfaces that are attached
+ via serial lines or via USB-to-serial adapters using the LAWICEL
+ ASCII protocol.
+endef
+
+$(eval $(call KernelPackage,can-slcan))
+
+
+define KernelPackage/can-flexcan
+  TITLE:=Support for Freescale FLEXCAN based chips
+  KCONFIG:=CONFIG_CAN_FLEXCAN
+  FILES:=$(LINUX_DIR)/drivers/net/can/flexcan.ko
+  AUTOLOAD:=$(call AutoProbe,flexcan)
+  $(call AddDepends/can,@TARGET_imx6)
+endef
+
+define KernelPackage/can-flexcan/description
+ Freescale FLEXCAN CAN bus controller implementation.
+endef
+
+$(eval $(call KernelPackage,can-flexcan))
+
+
+define KernelPackage/can-usb-ems
+  TITLE:=EMS CPC-USB/ARM7 CAN/USB interface
+  KCONFIG:=CONFIG_CAN_EMS_USB
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/ems_usb.ko
+  AUTOLOAD:=$(call AutoProbe,ems_usb)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-ems/description
+ This driver is for the one channel CPC-USB/ARM7 CAN/USB interface
+ from EMS Dr. Thomas Wuensche (http://www.ems-wuensche.de).
+endef
+
+$(eval $(call KernelPackage,can-usb-ems))
+
+
+define KernelPackage/can-usb-esd
+  TITLE:=ESD USB/2 CAN/USB interface
+  KCONFIG:=CONFIG_CAN_ESD_USB2
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/esd_usb2.ko
+  AUTOLOAD:=$(call AutoProbe,esd_usb2)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-esd/description
+ This driver supports the CAN-USB/2 interface
+ from esd electronic system design gmbh (http://www.esd.eu).
+endef
+
+$(eval $(call KernelPackage,can-usb-esd))
+
+
+define KernelPackage/can-usb-kvaser
+  TITLE:=Kvaser CAN/USB interface
+  KCONFIG:=CONFIG_CAN_KVASER_USB
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/kvaser_usb.ko
+  AUTOLOAD:=$(call AutoProbe,kvaser_usb)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-kvaser/description
+ This driver adds support for Kvaser CAN/USB devices like Kvaser
+ Leaf Light.
+endef
+
+$(eval $(call KernelPackage,can-usb-kvaser))
+
+
+define KernelPackage/can-usb-peak
+  TITLE:=PEAK PCAN-USB/USB Pro interfaces
+  KCONFIG:=CONFIG_CAN_PEAK_USB
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/peak_usb/peak_usb.ko
+  AUTOLOAD:=$(call AutoProbe,peak_usb)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-peak/description
+ This driver supports the PCAN-USB and PCAN-USB Pro adapters
+ from PEAK-System Technik (http://www.peak-system.com).
+endef
+
+$(eval $(call KernelPackage,can-usb-peak))
+
+
+define KernelPackage/can-usb-8dev
+  TITLE:=8 devices USB2CAN interface
+  KCONFIG:=CONFIG_CAN_8DEV_USB
+  FILES:=$(LINUX_DIR)/drivers/net/can/usb/usb_8dev.ko
+  AUTOLOAD:=$(call AutoProbe,usb_8dev)
+  $(call AddDepends/can,+kmod-usb-core)
+endef
+
+define KernelPackage/can-usb-8dev/description
+ This driver supports the USB2CAN interface
+ from 8 devices (http://www.8devices.com).
+endef
+
+$(eval $(call KernelPackage,can-usb-8dev))