bcm63xx: Improve CFE version mod patch.

Fix "cfe-" string length copy.
Check if there's an extra byte a.b.c-d.e / a.b.c-d.e-f.
Add support for Huawei CFE versions ("cfe-vd").

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3766/


Signed-off-by: Jonas Gorski <jogo@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@37101 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/brcm63xx/patches-3.9/309-cfe_version_mod.patch

 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -837,6 +837,8 @@ void __init board_prom_init(void)
- 	if (!memcmp(cfe, "cfe-v", 5))
- 		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
- 			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
-+	else if (!memcmp(cfe, "cfe-", 4))
-+		snprintf(cfe_version, 16, "%s", (char *) &cfe[4]);
- 	else
+@@ -834,10 +834,20 @@ void __init board_prom_init(void)
+ 
+ 	/* dump cfe version */
+ 	cfe = boot_addr + BCM963XX_CFE_VERSION_OFFSET;
+-	if (!memcmp(cfe, "cfe-v", 5))
+-		snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
+-			 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
+-	else
++	if (strstarts(cfe, "cfe-")) {
++		if(cfe[4] == 'v') {
++			if(cfe[5] == 'd')
++				snprintf(cfe_version, 11, "%s", (char *) &cfe[5]);
++			else if (cfe[10] > 0)
++				snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u-%u",
++					 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9], cfe[10]);
++			else
++				snprintf(cfe_version, sizeof(cfe_version), "%u.%u.%u-%u.%u",
++					 cfe[5], cfe[6], cfe[7], cfe[8], cfe[9]);
++		} else {
++			snprintf(cfe_version, 12, "%s", (char *) &cfe[4]);
++		}
++	} else
  		strcpy(cfe_version, "unknown");
  	printk(KERN_INFO PFX "CFE version: %s\n", cfe_version);
+ 

target/linux/brcm63xx/patches-3.9/403-6358-enet1-external-mii-clk.patch

 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -902,6 +902,8 @@ void __init board_prom_init(void)
+@@ -910,6 +910,8 @@ void __init board_prom_init(void)
  		if (BCMCPU_IS_6348())
  			val |= GPIO_MODE_6348_G3_EXT_MII |
  				GPIO_MODE_6348_G0_EXT_MII;

target/linux/brcm63xx/patches-3.9/409-MIPS-BCM63XX-add-HS-SPI-platform-device-and-register.patch

@@ -37,7 +37,7 @@ Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
  #include <bcm63xx_dev_pcmcia.h>
  #include <bcm63xx_dev_spi.h>
  #include <bcm63xx_dev_usb_ehci.h>
-@@ -995,6 +996,7 @@ int __init board_register_devices(void)
+@@ -1003,6 +1004,7 @@ int __init board_register_devices(void)
  			pr_err(PFX "failed to register fallback SPROM\n");
  	}
  #endif

target/linux/brcm63xx/patches-3.9/413-BCM63XX-allow-providing-fixup-data-in-board-data.patch

@@ -18,7 +18,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
  
  #include <uapi/linux/bcm933xx_hcs.h>
  #include <uapi/linux/bcm963xx_tag.h>
-@@ -950,6 +951,7 @@ int __init board_register_devices(void)
+@@ -958,6 +959,7 @@ int __init board_register_devices(void)
  {
  	int button_count = 0;
  	int led_count = 0;
@@ -26,7 +26,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
  
  	if (board.has_uart0)
  		bcm63xx_uart_register(0);
-@@ -988,7 +990,8 @@ int __init board_register_devices(void)
+@@ -996,7 +998,8 @@ int __init board_register_devices(void)
  	 * do this after registering enet devices
  	 */
  #ifdef CONFIG_SSB_PCIHOST
@@ -36,7 +36,7 @@ Subject: [PATCH 58/72] BCM63XX: allow providing fixup data in board data
  		memcpy(bcm63xx_sprom.et0mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  		memcpy(bcm63xx_sprom.et1mac, bcm63xx_sprom.il0mac, ETH_ALEN);
  		if (ssb_arch_register_fallback_sprom(
-@@ -1034,5 +1037,9 @@ int __init board_register_devices(void)
+@@ -1042,5 +1045,9 @@ int __init board_register_devices(void)
  		platform_device_register(&bcm63xx_gpio_keys_device);
  	}
  

target/linux/brcm63xx/patches-3.9/418-MIPS-BCM63XX-pass-caldata-info-to-flash.patch

@@ -11,7 +11,7 @@ Subject: [PATCH 69/80] MIPS: BCM63XX: pass caldata info to flash
 
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1009,7 +1009,7 @@ int __init board_register_devices(void)
+@@ -1017,7 +1017,7 @@ int __init board_register_devices(void)
  	if (board.num_spis)
  		spi_register_board_info(board.spis, board.num_spis);
  

target/linux/brcm63xx/patches-3.9/420-BCM63XX-add-endian-check-for-ath9k.patch

@@ -39,7 +39,7 @@
  		return;
 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1039,7 +1039,8 @@ int __init board_register_devices(void)
+@@ -1047,7 +1047,8 @@ int __init board_register_devices(void)
  
  	/* register any fixups */
  	for (i = 0; i < board.has_caldata; i++)

target/linux/brcm63xx/patches-3.9/421-BCM63XX-add-led-pin-for-ath9k.patch

 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
-@@ -1040,7 +1040,7 @@ int __init board_register_devices(void)
+@@ -1048,7 +1048,7 @@ int __init board_register_devices(void)
  	/* register any fixups */
  	for (i = 0; i < board.has_caldata; i++)
  		pci_enable_ath9k_fixup(board.caldata[i].slot, board.caldata[i].caldata_offset,

target/linux/brcm63xx/patches-3.9/422-BCM63XX-add-a-fixup-for-rt2x00-devices.patch

@@ -36,7 +36,7 @@ Subject: [PATCH 72/72] 446-BCM63XX-add-a-fixup-for-rt2x00-devices
  
  #include <uapi/linux/bcm933xx_hcs.h>
  #include <uapi/linux/bcm963xx_tag.h>
-@@ -1038,9 +1039,19 @@ int __init board_register_devices(void)
+@@ -1046,9 +1047,19 @@ int __init board_register_devices(void)
  	}
  
  	/* register any fixups */

target/linux/brcm63xx/patches-3.9/520-bcm63xx-add-support-for-96368MVWG-board.patch

@@ -100,7 +100,7 @@ Subject: [PATCH 32/63] bcm63xx: add support for 96368MVWG board.
  };
  
  /*
-@@ -2452,12 +2528,25 @@ void __init board_prom_init(void)
+@@ -2460,12 +2536,25 @@ void __init board_prom_init(void)
  		bcm63xx_pci_enabled = 1;
  		if (BCMCPU_IS_6348())
  			val |= GPIO_MODE_6348_G2_PCI;