Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46278 3c298f89-4303-0410-b956-a3cf2f4a3e73

Make wpan depend on not kernel 3.18 so it will get activated on all 
other kernel versions like 4.0 and 4.1.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46276 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46275 3c298f89-4303-0410-b956-a3cf2f4a3e73

r46248 added case statements in the same places

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46274 3c298f89-4303-0410-b956-a3cf2f4a3e73

fix a very minor typo in warning message

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46273 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46272 3c298f89-4303-0410-b956-a3cf2f4a3e73

Internal GPIO pins are used for PoE passthrough setups in multi-port
routers. This patch implemnets control over this hardware feature for
Ubiquiti Nanostations and TP-Link CPE510.

Signed-off-by: Lars Kruse <lists@sumpfralle.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46271 3c298f89-4303-0410-b956-a3cf2f4a3e73

wlan5g is phy0tpt and wlan2g phy1tpt.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46270 3c298f89-4303-0410-b956-a3cf2f4a3e73

works with:
qemu-system-mipsel -M malta \
-hda openwrt-malta-le-root.ext4 \
-kernel openwrt-malta-le-vmlinux.elf \
-nographic -append "root=/dev/sda console=ttyS0"

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46269 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46268 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46267 3c298f89-4303-0410-b956-a3cf2f4a3e73

Fixes relocation errors on PowerPC

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46266 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46265 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46264 3c298f89-4303-0410-b956-a3cf2f4a3e73

Now we support NVRAM whatever its size is.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46262 3c298f89-4303-0410-b956-a3cf2f4a3e73

Use actual partition size and content offset to calculate it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46260 3c298f89-4303-0410-b956-a3cf2f4a3e73

It breaks the build

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46256 3c298f89-4303-0410-b956-a3cf2f4a3e73

Can be helpful in diagnosing unexpected package overlaps between
feeds/core.

Signed-off-by: Karl Palsson <karlp@remake.is>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46255 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46254 3c298f89-4303-0410-b956-a3cf2f4a3e73

This reverts commit r45579.

With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.

It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)

And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)

This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46253 3c298f89-4303-0410-b956-a3cf2f4a3e73

Some MTD partitions with NVRAM have content starting in the middle. In
such case offset is set and nvram_header returns pointer to the middle.
It means we have to respect offset when calculating remaining space.

By the way use real MTD partition size (nvram_part_size variable) as we
may want to bump NVRAM_SPACE in the (very near) future.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46251 3c298f89-4303-0410-b956-a3cf2f4a3e73

This patch adds support for the Cisco WAP4410N, an access point that uses the
AR9132 SoC. Web upgrades from stock are not yet possible, UART access required
for the initial flash.

Signed-off-by: Ryan A Young <rayoung@utexas.edu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46250 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Steven Barth <steven@midlink.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46249 3c298f89-4303-0410-b956-a3cf2f4a3e73

Based on trunk r46212.

Signed-off-by: Jaehoon You <teslamint@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46248 3c298f89-4303-0410-b956-a3cf2f4a3e73

The mips reloc patch introduced new allocations which were done before
add_unformed_module but never freed them in case of an error. A new hook in
Linux 3.19 called module_arch_freeing_init can be used for freeing memory
which were allocated during this init phase.

The problem can be seen when trying to load a module (via busybox insmod)
when it was already loaded.

    free -m
    for i in `seq 1 100`; do
        /sbin/insmod /lib/modules/*/ath9k.ko >& /dev/null
    done
    free -m

This simple loop would leak ~3.2 MB.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46247 3c298f89-4303-0410-b956-a3cf2f4a3e73

fixes a bug where gid was checked twice instead of the uid/gid combo

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46246 3c298f89-4303-0410-b956-a3cf2f4a3e73

Ath10k has now a proper method of providing calibration data via
the kernel firmware API. This patch can be dropped as all boards
now use the proper method.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46245 3c298f89-4303-0410-b956-a3cf2f4a3e73

Currently one board uses the "proper" way of providing firmware
with the name ath10k/cal-pci-<pci address>.bin, whereas other
boards patch board.bin template in preinit and rely on a custom
ath10k patch to use calibration data from the template.

This patch makes all boards use the first method.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46244 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46243 3c298f89-4303-0410-b956-a3cf2f4a3e73

bluetooth is separate from 802.11 entries too

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46242 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46241 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46240 3c298f89-4303-0410-b956-a3cf2f4a3e73

This changes makes it possible to store custom settings
in individual files inside the directory /etc/sysctl.d/.

Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46239 3c298f89-4303-0410-b956-a3cf2f4a3e73

This device is identical to the TL-WR740N v5, it even uses the same HWID (which
wasn't the case for older TL-WR741ND revisions).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46238 3c298f89-4303-0410-b956-a3cf2f4a3e73

Backport for the Spansion S25FL164K
It's a 8 MiB flash chip with 4 KiB erase sectors.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46237 3c298f89-4303-0410-b956-a3cf2f4a3e73

This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s3



Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46236 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46235 3c298f89-4303-0410-b956-a3cf2f4a3e73

rocket-m titanium is a device based on ar9344 with 802.11af poe.
It doesn't use the SoC wifi, instead it's using an ar9280 connected to
the pci bus. The gps version of the rocket-m ti is working, but
gps is untested. The gps is connected to the first serial port.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46234 3c298f89-4303-0410-b956-a3cf2f4a3e73

Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.

This fixes #18074.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46233 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46232 3c298f89-4303-0410-b956-a3cf2f4a3e73