git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33551 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33550 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33549 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33548 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33547 3c298f89-4303-0410-b956-a3cf2f4a3e73

Sometimes the port 0 was the WAN port or there could be some device 
where the port 0 is not wired to an actual Ethernet port. Now telnet in 
failsafe will listen on all ports of the switch so user do not have to 
search for the correct port any more. This change will make the switch 
leak traffic between the WAN and the LAN port, but you should not use 
failsafe while connected to a untrusted network.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33544 3c298f89-4303-0410-b956-a3cf2f4a3e73

With these images, it is possible to use the 'unused'
partition of the flash. The 'fat' images can be installed
with the sysupgrade command. When a 'fat' image is
installed from a regular one, the platform specific
sysupgrade script copies the calibration data to the
end of the flash. Likewise, when a regular image is
installed  from the 'fat' version the sysupgrade script
copies the calibration data back to the original location.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33540 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33539 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33538 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33537 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33536 3c298f89-4303-0410-b956-a3cf2f4a3e73

Should fix #12211. Compile tested only.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33535 3c298f89-4303-0410-b956-a3cf2f4a3e73

[include] version.mk: ensure that %S is always populated with a subtarget identifier, fallback to "generic" if no subtarget exists


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33534 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33532 3c298f89-4303-0410-b956-a3cf2f4a3e73

On a lightly loaded 24Kc, as measured by 'openssl speed sha1', shows between
27% and 120% speedup depending on block size.
SHA1 is notably used in Transmission for piece verification.
Patch by Catalin Patulea

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33531 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33530 3c298f89-4303-0410-b956-a3cf2f4a3e73

Thanks Jonas


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33529 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33527 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33526 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33525 3c298f89-4303-0410-b956-a3cf2f4a3e73

build: add the + token to any commands that can pass through the jobserver, fixes parallel build on some systems

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33523 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33522 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33521 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33520 3c298f89-4303-0410-b956-a3cf2f4a3e73

tools/mkimage: avoid picking up unrelated /usr/include headers with the same name as internal header files (e.g. image.h), fixes #12232

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33519 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33518 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33517 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33516 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33515 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33514 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33513 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33512 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33511 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33510 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33509 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33508 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33507 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33506 3c298f89-4303-0410-b956-a3cf2f4a3e73

[packages] mac80211: fix b43 firmware squash for HT and LCN firmware, one file was missing for both.


git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33505 3c298f89-4303-0410-b956-a3cf2f4a3e73

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@33504 3c298f89-4303-0410-b956-a3cf2f4a3e73