- Aug 14, 2015
-
-
jogo authored
Instead of each target defining it the same, move the KDIR_TMP definition to include/image.mk. In addition Image/Build/SysupgradeNAND already requires KDIR_TMP to be set, so it makes sense to have it globally defined. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46592 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 13, 2015
-
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46589 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
nbd authored
Previous patch 6f2905ee enabled ADM in the kernel, which causes a kernel panic when accessing the SPI flash. As a workaround, We'll disable DMA for the flash for now. It was not enabled previously anyway so we'll just leave it as is. Reported-by:
Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46587 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 12, 2015
-
-
rmilecki authored
We got check for nvram_len placed too early and the code never tried reading CFE variables used on WGT634U. This is a regression introduced in r45942 and reported in #20291. Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46584 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
rmilecki authored
It was missed in the r46471. Signed-off-by:
-
- Aug 11, 2015
-
-
rmilecki authored
This allows requesting "timeout" ACTION in script by returning a positive value. Signed-off-by:
-
- Aug 10, 2015
-
-
rmilecki authored
Signed-off-by:
-
- Aug 09, 2015
-
-
hauke authored
This module had two depends lines. Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46576 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
hauke authored
There was no rule to load this module. Signed-off-by:
-
hauke authored
The name of the module was wrong before. This should fix #20283. Signed-off-by:
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46573 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
hauke authored
This fixes this linking problem: ERROR: "clk_set_rate" [drivers/usb/phy/phy-generic.ko] undefined! ERROR: "clk_round_rate" [drivers/media/v4l2-core/videodev.ko] undefined! ERROR: "clk_set_rate" [drivers/media/v4l2-core/videodev.ko] undefined! In the upstream kernel it is fixed here: https://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=411520af8ec9456886359b42628e583ac58e7e44 This closes: #20162, #20172, #20196, #20197, #20202 and #20308 Signed-off-by:
-
wigyori authored
Signed-off-by:
-
hauke authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20 Signed-off-by:
-
- Aug 07, 2015
-
-
nbd authored
Previous patch set backported the recently posted NAND flash driver to 3.18 and 4.1 kernel. This patch now enables it in the kernel config. There is no change to the partition layout and init yet. But the NAND flash can be seen in the mtd list on an AP148: root@OpenWrt:/# cat /proc/mtd dev: size erasesize name mtd0: 10000000 00020000 "qcom-nandc" ... Signed-off-by:
-
nbd authored
These patches add support for ipq806x NAND flash controller. Most of these are cherry-picked & backported from LKML: *https://lkml.org/lkml/2015/8/3/16 This patch just modifies the kernel code, but doesn't change the config. It should be harmless. Signed-off-by:
-
nbd authored
These are cherry-picked & backported from LKML: *https://lkml.org/lkml/2015/3/17/19 They are enabled on both 3.18 and 4.1 kernel. Patches 150 to 154 are applying changes merged since 3.18; they enable mechanisms used by the ADM driver. ADM engine is used by the NAND controller, so it is necessary to bring-up NAND flash support. Signed-off-by:
-
- Aug 05, 2015
-
-
jogo authored
Make sure phys are probed and present before we detect wifis. Signed-off-by:
-
jogo authored
Without it the wifi isn't really usable. Signed-off-by:
-
jogo authored
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used for template generation, so need to be present before inclusion of image.mk in target image Makefiles. So move all declarations to before any includes. Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls") Signed-off-by: -
jogo authored
It looks like RAC flushes cause random corruption(?) when the second thread is set as default. Fixes #20160. Signed-off-by:
-
jogo authored
BCM6318: add support for Plusnet / Sagem 2704N (V1) Signed-off-by:
Matt Goring <matt.goring@googlemail.com> Signed-off-by:
-
jogo authored
It boots fine, so no reason to not build it. Signed-off-by:
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4 Signed-off-by:
Daniel Golle <daniel@makrotopia.org> [jogo: fix brcm2708 patches, refresh target patches] Signed-off-by:
-
nbd authored
We forgot to enable the stmmac driver for 4.1 kernel, so ethernet interfaces don't show-up on this kernel. Signed-off-by:
-
nbd authored
Remove options which have been moved into the generic config ever since. Signed-off-by:
-
nbd authored
Old bootloader (same ones which have DT disabled) don't perform any PCIe initialization. The consequence is a freeze during PCIe bring-up on these old u-boot. Same kernel with a newer bootloaders works fine as they contain the corresponding PCIe init code. In this change, we'll add the missing init and make sure the kernel doesn't rely on some preexisting init to get PCIe to work. That includes the following changes: *GPIOs: set function & drive strength *Clocks: add init code for aux & ref clocks *PCIe driver: additional init of the hardware controller Tested 3.18 and 4.1 on an AP148 with bootloader branch 0.0.1 Signed-off-by:
-
nbd authored
PCIe controller nodes are numbers 0/1/2 in the chipset dtsi file, but the pinmux nodes are numbers 1/2/3. We'll make it consistent by changing the pinmux numbering to match the controller's one. Signed-off-by:
-
nbd authored
Certain AP148 platforms (and derivative) use bootloaders which did not have DT enabled. In order to support these old platforms, we'll now make the following modifications: *explicitely add the memory node in the AP148 DT: this used to be added by new u-boot through a run-time patch mechanism. We'll now add it explicitely so it works on boots which don't support that feature. New boots will have the node twice, the second one will be ignored. *add the zImage generation next to the FIT image for AP148. Other platforms using non-DT enabled bootloaders may want to leverage this zImage code to generate their own firmare as well. Signed-off-by:
-
nbd authored
Default kernel doesn't change and stays on 3.18 for now. Signed-off-by:
-
nbd authored
Signed-off-by:
-
- Aug 03, 2015
-
-
hauke authored
use URL scheme documented at http://sourceforge.net/p/forge/documentation/Git/ Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> Signed-off-by:
-
hauke authored
Update the md5sum to the new version. Signed-off-by:
-
hauke authored
Fixes a 100% cpu usage issue if using dhcp-script. Signed-off-by:
Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk> Signed-off-by:
-
- Aug 02, 2015
-
-
nbd authored
Reported-by:
Steve Brown <sbrown@cortland.com> Signed-off-by:
Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46547 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
This patch fixes weak radio signal reported by nikola.georgiev Signed-off-by:
L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46545 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
The generic kernel cmdline parser ignores argv[0], this caused a regression for all lzma-loader based boards with linux 4.1 Signed-off-by:
-
nbd authored
When stack protector support is disabled in libc (always the case for !musl), gcc assumes that it needs to use __stack_chk_guard for the stack canary. This causes kernel build errors, because the kernel is only set up to handle TLS stack canaries. Signed-off-by:
-
- Aug 01, 2015
-
-
nbd authored
Signed-off-by:
-
