- Jul 24, 2015
-
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46482 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46477 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
fixes #19816 Signed-off-by:
-
blogic authored
NCM specs are not actually mandating a specific position in the frame for the NDP (Network Datagram Pointer). However, some Huawei devices will ignore our aggregates if it is not placed after the datagrams it points to. Add support for doing just this, in a per-device configurable way. While at it, update NCM subdrivers, disabling this functionality in all of them, except in huawei_cdc_ncm where it is enabled instead. We aren't making any distinction between different Huawei NCM devices, based on what the vendor driver does. Standard NCM devices are left unaffected: if they are compliant, they should be always usable, still stay on the safe side. This change has been tested and working with a Huawei E3131 device (which works regardless of NDP position) and an E3372 device (which mandates NDP to be after indexed datagrams). Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46464 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46463 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46462 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This adds support for I2S SoC Audio modules. Signed-off-by:
-
blogic authored
This adds BCM2835 camera interface driver as a kernel module. Signed-off-by:
-
blogic authored
Signed-off-by:
Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46459 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch adds support for the Onion Omega. https://onion.io/omega Signed-off-by:
L. D. Pinney <ldpinney@gmail.com> Acked-by:
Boken Lin <bl@onion.io> Tested-by:
Jacky Huang <huangfangcheng@163.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46458 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
There are a few NETGEAR devices which don't terminate the model name in the ART with a NUL byte, at least some NETGEAR WNDR3700v2. The current awk expression doesn't match 0xFF bytes, so AR71XX_MODEL contains lots of trailing 0xFF garbage in this case. Fix this by matching for the first non-printable character and explicitly setting LC_CTYPE=C (probably not strictly necessary on OpenWrt, but will definitely work like this, even when awk supports locales and LANG is set). Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46455 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
STORYLiNK SAP-G3200U3 is an AC1200 router based on MT7621AT+MT7602EN+MT7612EN. It has 128MB DDR3, 8MB NOR FLASH, 5-port Gbps switch and 1x USB 3.0. The following patch adds support for this device. Tested and working: * ethernet * both WiFi radios * USB 3.0 * buttons * ethernet switch and USB diag LEDs * UART * GPIOs Tested and not working: * LEDs for WiFi radios (connected with WiFi chips, not supported in mt76?) * failsafe mode (known problem, needs workaround like other MTK based devices) More information in Wiki: http://wiki.openwrt.org/toh/storylink/sap-g3200u3 Signed-off-by:
Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46454 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This ports 9e2a7b77 to the 4.1 patches. I forgot this when preparing the initial 4.1 patch. Signed-off-by:
-
- Jul 22, 2015
-
-
jogo authored
Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46441 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.9 Signed-off-by:
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.19 Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46435 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 20, 2015
-
-
nbd authored
Signed-off-by:
-
- Jul 19, 2015
-
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46426 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
The commit is incomplete, it does not even build the mach-* file This reverts commit 6e6adcf7 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46425 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
- Jul 18, 2015
-
-
blogic authored
As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working on these devices. This adds them to the calibration data loading introduced in r46244 and thus makes 5GHz work again for these devices. Signed-off-by:
Christian Beier <cb@shoutrlabs.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46415 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46414 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
- Jul 17, 2015
-
-
blogic authored
This patch add support for Planex MZK-DP150N. a mini router on the MT7620A SoC with one Ethernet port and a 802.11n 2.4 GHz radio. Signed-off-by:
YuheiOKAWA <tochiro.srchack@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46405 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
