- Apr 20, 2015
-
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45525 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
It was reported that OM5P-AN needs not only a delay setting of 1 for RXD/RDV but 2. These was found when testing with a NetGear GS752TP POE switch with a cable length of 50ft and 250ft. Signed-off-by:
Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45524 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
The ETH_RXDV_DELAY (17:16) and ETH_RXD_DELAY (15:14) are currently not cleared by the function ath79_setup_ar934x_eth_cfg. Clearing these in the ath79_setup_ar934x_eth_cfg may cause problems on some hardware because they rely on the preset value by the bootloader. Instead another function is introduced which also works on ETH_CFG on AR934x. It can be used to safely clear and set ETH_RXDV_DELAY and ETH_RXD_DELAY on machines which require special settings. Signed-off-by:
-
nbd authored
The commit r38948 ("ag71xx: add F1E specific feature bit definitions to AR934X register file") introduced definitions for some bits in the RDV/RXD part of the ETH_CFG register of AR934x. These are incomplete because ETH_RXDV_DELAY is specified as 17:16 and ETH_RXD_DELAY is specified 15:14. The original commit only specified the lower bits. The upper bits also have to be unset when the lower bits should only be set. Signed-off-by: -
nbd authored
The tx/rx delay bits in the ETH_XMII_CONTROL register have to be unset when the enable_rgmii_rx_delay/enable_rgmii_tx_delay will be set in the AT803x PHY. Othwise the throughput in gigabit mode is heavily reduced. Signed-off-by:
Sven Eckelmann <sven@open-mesh.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45521 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
instead of failing when authsae is not installed, also try using wpa_supplicant as the newly added -mesh variants support mesh mode and SAE encryption. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45520 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
jow authored
Signed-off-by:
Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45518 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jow authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
cyrus authored
Signed-off-by:
Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45514 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
Signed-off-by:
-
cyrus authored
The most significant change from the previous version is the trimming of the 300-ip_tiny.patch to lib/utils.c where a section previously patched had vanished. That section of the patch was removed. Built and lightly tested on ar71xx against uClibc and musl. Signed-off-by:
Russell Senior <russell@personaltelco.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45512 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Apr 19, 2015
-
-
nbd authored
Profile definitions need to be checked and fixed before this patch can be applied again. Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
cmake.mk: enable -Bsymbolic-functions by default for linking shared libs, slightly improves performance and compression Signed-off-by:
-
nbd authored
Signed-off-by:
-
jogo authored
Refresh patches to remove the trailing whitespaces caused by an old diffutils version on osx. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45506 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jogo authored
This should rather be done by passing appropriate platform_data/OF, but should suffice for now. Fixes e.g. GbE ports on BCM963268BU_P300. Signed-off-by:
-
jogo authored
At least the third rgmii port is available on 63169, so assume all are available. Simplifies cpu vs. variant handling. Signed-off-by:
-
nbd authored
Signed-off-by:
-
jogo authored
- Fix profile name. - Rremove whitespace on board patch. - Refresh patches. Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> Signed-off-by:
-
- Apr 18, 2015
-
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
base-files: make the generic sysinfo script run earlier to allow the mount_root script to pick up the board name Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
cyrus authored
fixes dbclient login into OpenSSH 6.8p1 error: "Bad hostkey signature" reported on irc, replicated with Arch Linux Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45493 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Hostapd's control file location was changed in 2013, and that has apparently broken the wps button hotplug script in cases where there are multiple radios and wps is possibly configured also for the second radio. The current wps button hotplug script always handles only the first radio. https://dev.openwrt.org/browser/trunk/package/network/services/hostapd/files/wps-hotplug.sh The reason is that the button hotplug script seeks directories like /var/run/hostapd*, as the hostapd-phy0.conf files were earlier in per-interface subdirectories. Currently the *.conf files are directly in /var/run and the control sockets are in /var/run/hostapd, but there is no subdirectory for each radio. root@OpenWrt:/# ls /var/run/hostapd* /var/run/hostapd-phy0.conf /var/run/hostapd-phy1.conf /var/run/hostapd: wlan0 wlan1 The hotplug script was attempted to be fixed after the hostapd change by r38986 in Dec2013, but that change only unbroke the script for the first radio, but left it broken for multiple radios. https://dev.openwrt.org/changeset/38986/ The script fails to find subdirectories with [ -d "$dir" ], and passes just the only found directory /var/run/hostapd, leading into activating only the first radio, as hostapd_cli defaults to first socket found inthe passed directory: root@OpenWrt:/# hostapd_cli -? ... usage: hostapd_cli [-p<path>] [-i<ifname>] [-hvB] [-a<path>] \ [-G<ping interval>] [command..] ... -p<path> path to find control sockets (default: /var/run/hostapd) ... -i<ifname> Interface to listen on (default: first interface found in the socket path) Below is a run with the default script and with my proposed solution. Default script (with logging added): ================================== root@OpenWrt:/# cat /etc/rc.button/wps #!/bin/sh if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then for dir in /var/run/hostapd*; do [ -d "$dir" ] || continue logger "WPS activated for: $dir" hostapd_cli -p "$dir" wps_pbc done fi >>>> WPS BUTTON PRESSED <<<<< root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status PBC Status: Timed-out Last WPS result: None root@OpenWrt:/# logread | grep WPS Tue Apr 14 18:38:50 2015 user.notice root: WPS activated for: /var/run/hostapd wlan0 got WPS activated, while wlan1 remained inactive. I have modified the script to search for sockets instead of directories and to use the "-i" option with hostapd_cli, and now the script properly activates wps for both radios. As "-i" needs the interface name instead of the full path, the script first changes dir to /var/run/hostapd to get simply the interface names. Modified script (with logging): =============================== root@OpenWrt:/# cat /etc/rc.button/wps #!/bin/sh if [ "$ACTION" = "pressed" -a "$BUTTON" = "wps" ]; then cd /var/run/hostapd for dir in *; do [ -S "$socket" ] || continue logger "WPS activated for: $socket" hostapd_cli -i "$socket" wps_pbc done fi >>>> WPS BUTTON PRESSED <<<<< root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan0 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# hostapd_cli -p /var/run/hostapd -i wlan1 wps_get_status PBC Status: Active Last WPS result: None root@OpenWrt:/# logread | grep WPS Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan0 Tue Apr 14 18:53:06 2015 user.notice root: WPS activated for: wlan1 Both radios got their WPS activated properly. I am not sure if my solution is optimal, but it seems to work. WPS button is maybe not that often used functionality, but it might be fixed in any case. Routers with multiple radios are common now, so the bug is maybe more prominent than earlier. The modified script has been in a slightly different format in my community build since r42420 in September 2014. Signed-off-by:
Hannu Nyman <hannu.nyman@iki.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45492 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
The new building code included the rootfs twice when building tplink initramfs images. To make it more readable move initramfs into an own build step Build/mktplinkfw-initramfs. Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45491 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
There are 2 images missing: TLWR2543 TLWR1043V2 which have special properties Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
The new image size is verified by a running tplink device and checked against mktplinkfw source code. Signed-off-by:
-
blogic authored
The last line of procd.sh has a reference to procd_add_interface_reload. procd_add_interface_reload doesn't seem to exist. I've removed the reference of it to minimize confusion. Signed-off-by:
Eric Schultz <eschultz@prplfoundation.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45487 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jogo authored
Signed-off-by:
-
- Apr 17, 2015
-
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
