- Aug 21, 2015
-
-
wigyori authored
platforms. As there is no single config symbol deciding whether libahci.ko is being built or not it seems the most sensitive thing to package it in kmod-ata-core. Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46701 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
kaloz authored
problems. Now that the switch driver can handle two devices with the same MAC address in separate VLANs we can go back to using the same address on both interfaces. This is the Linksys firmware's default behavior. Signed-off-by:
Claudio Leite <leitec@staticky.com> Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46700 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
kaloz authored
a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1). This also clears any bootloader-set FDB defaults. This had caused issues creating port-based VLANs when mappings overlapped previous VLANs. Packets destined to a port not in the default port group flooded all ports. Tested on a 88E6171 (Linksys EA4500) and 88E6172 ('1900AC) Signed-off-by:
Claudio Leite <leitec@staticky.com> Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46699 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
kaloz authored
Thanks Sebastian for spotting it. Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46697 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46696 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 20, 2015
-
-
cyrus authored
Signed-off-by:
Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46694 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 19, 2015
-
-
kaloz authored
Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46693 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
kaloz authored
The u-boot boot counter was never reset after a successful boot, which sometimes could make some variables become out of sync. This patch adds support for the boot counter and enables auto_recovery unconditionally. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> Signed-off-by:
Rob Mosher <nyt-openwrt@countercultured.net> Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46690 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
kaloz authored
Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46688 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 18, 2015
-
-
kaloz authored
Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46687 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46685 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
Signed-off-by:
Steven Barth <steven@midlink.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46684 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
cyrus authored
Packages that depend on PolarSSL fail to build because polarssl's InstallDev section never actually gets executed because (prior to this patch) the package name does not match the subdir the package is in (presumably due to upstream name change). As a workaround I have changed the package name back to polarssl and used a new variable SRC_PKG_NAME for the purposes of downloading the upstream tarball and creating PKG_BUILD_DIR. Signed-off-by:
Daniel Dickinson <openwrt@daniel.thecshore.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46683 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 17, 2015
-
-
hauke authored
firmware is not available in linux-firmware yet so use official driver source Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46682 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jow authored
Signed-off-by:
Jo-Philipp Wich <jow@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46677 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
The patch submitted in [46649] was mangled in the use of gmails webmail interface, tabs replaced with spaces, resulting in a patch which dit not apply. This should fix the issue, sorry for the noise. Signed-off-by:
Ben Whitten <benwhitten@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46676 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46672 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46671 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
The BT Home Hub 5A uses three PEF7071 with PHY ID 0xd565a401. Daniel's PHY driver (for his u-boot sources) already supports that PHY because it uses a PHY ID mask of 0xfffffff8. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46670 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
adds extra station info reporting Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46669 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Daniel Golle <daniel@makrotopia.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46668 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
0073 needs to applied afert 0102 Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46667 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
fixes 2 bugs * typo * use %04d rather than %d when printing the position Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46666 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Instead of using board name provided explicitly as text in LED name, ex.: [...] mlwg2) status_led="mlwg2:blue:system" [...] use $board variable, which allows to combine together multiple boards with same color and LED names, ex: [...] mlw221|\ mlwg2) status_led="$board:blue:system" [...] The above approach allows to shrink size of code in base-files/etc/board.d/01_leds and base-files/etc/diag.sh scripts dramatically. One thing to keep in mind here is that we assume to use proper and consistent LED naming scheme ("device:color:led-name"). Signed-off-by:
Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46665 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach. The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target: * fixes wrong indentation * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body) * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files) * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds) Signed-off-by:
Piotr Dymacz <pepe2k@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46664 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Weijie Gao <hackpascal@gmail.com> This patch adds support for TP-Link TL-WDR6500 v2. The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for the whole firmware, so I have to create a new firmware creation method. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46663 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Weijie Gao <hackpascal@gmail.com> This patch adds flash layout parser for TP-Link firmwares which have a 64kb bootloader. This is used for TP-Link TL-WDR6500 v2. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46662 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Weijie Gao <hackpascal@gmail.com> This patch adds header version 2 option for mktplinkfw. The version 2 header is used for AR/QCA firmwares and is not the same as the header generated by mktplinkfw2. Instead, it is nearly the same as version 1 header except for the header version and the RSA signature. The header version 2 support is used for newer TP-Link routers which have only a 64kb bootloader part, e.g. TL-WDR6500 v2. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46661 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46660 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46659 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
*Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in the kernel config *Replaces the MTD layout in DT by the dynamic layout provided by the SMEM parser for AP148 Using the OF based parser is still possible on platforms which have a fixed MTD partition layout. Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46658 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch adds a new parser which uses the SMEM available on IPQ and some other QCOM platforms to map the MTD partitions. Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46657 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
2 patches are cherry-picked from the following LKML thread: *https://lkml.org/lkml/2015/4/11/208 The last patch (036-soc-qcom-add-smem-to-IPQ806x-platforms.patch) is adding the corresponding DT nodes required for IPQ806x. Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46656 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This change cherry-picks the following 3 changes from linux-next: *fb7737 hwspinlock/core: add device tree support *19a0f6 hwspinlock: qcom: Add support for Qualcomm HW Mutex block *bd5717 hwspinlock: qcom: Correct msb in regmap_field We're also adding a patch to add the hardware spinlock device nodes on IPQ806x platforms (033-soc-qcom-Add-sfbp-device-to-IPQ806x-dts.patch). Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46655 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
The "linux,part-probe" dts parsing is a pretty neat generic feature. It has been posted to kernel.org and could easily be reused by all targets. This change moves the patch to the 3.18 and 4.1 generic folders, and makes the feature available to all platforms who may want to use it. Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46654 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Using the postinst script for sanity checks and expecting opkg to fail if the postinst didn't return 0 was possible in Barrier Breaker, propagate the real postinst return code through default_postinst to restore this behaviour. Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46653 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Other VLAN related options are already being processed in netifd.sh but the vlan_file option is missing. This option allows the mapping of vlan IDs to network interfaces and will be used in dynamic VLAN feature for binding stations to interfaces based on VLAN assignments. The change is done similarly to the wpa_psk_file option. Signed-off-by:
Gong Cheng <chengg11@yahoo.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46652 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Add support for the Black Swift board: http://www.black-swift.com/ Took relevant parts and slightly adapted from: https://github.com/blackswift/openwrt/blob/master/bsb.patch Signed-off-by:
Bruno Randolf <br1@einfach.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46651 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
With this change we let user know 5 seconds have passed and reset button can be released (to trigger factory reset) Signed-off-by:
Rafał Miłecki <zajec5@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46650 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch is backport of a fix to a USB prototype mismatch bug found in 3.18 kernels, originally submitted by Boris Brezillon [1]. The symptom of this bug was that devices attached to the at91 using at91_ohci on a hub never appeared and failed to initialise. [1] http://www.spinics.net/lists/linux-usb/msg125969.html Signed-off-by:
Ben Whitten <ben.whitten@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46649 3c298f89-4303-0410-b956-a3cf2f4a3e73
-