Based on trunk r46212.

Signed-off-by: Jaehoon You <teslamint@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46248 3c298f89-4303-0410-b956-a3cf2f4a3e73

The mips reloc patch introduced new allocations which were done before
add_unformed_module but never freed them in case of an error. A new hook in
Linux 3.19 called module_arch_freeing_init can be used for freeing memory
which were allocated during this init phase.

The problem can be seen when trying to load a module (via busybox insmod)
when it was already loaded.

    free -m
    for i in `seq 1 100`; do
        /sbin/insmod /lib/modules/*/ath9k.ko >& /dev/null
    done
    free -m

This simple loop would leak ~3.2 MB.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46247 3c298f89-4303-0410-b956-a3cf2f4a3e73

fixes a bug where gid was checked twice instead of the uid/gid combo

Signed-off-by: John Crispin <blogic@openwrt.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46246 3c298f89-4303-0410-b956-a3cf2f4a3e73

Ath10k has now a proper method of providing calibration data via
the kernel firmware API. This patch can be dropped as all boards
now use the proper method.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46245 3c298f89-4303-0410-b956-a3cf2f4a3e73

Currently one board uses the "proper" way of providing firmware
with the name ath10k/cal-pci-<pci address>.bin, whereas other
boards patch board.bin template in preinit and rely on a custom
ath10k patch to use calibration data from the template.

This patch makes all boards use the first method.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46244 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Roman Yeryomin <roman@advem.lv>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46243 3c298f89-4303-0410-b956-a3cf2f4a3e73

bluetooth is separate from 802.11 entries too

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46242 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46241 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46240 3c298f89-4303-0410-b956-a3cf2f4a3e73

This changes makes it possible to store custom settings
in individual files inside the directory /etc/sysctl.d/.

Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46239 3c298f89-4303-0410-b956-a3cf2f4a3e73

This device is identical to the TL-WR740N v5, it even uses the same HWID (which
wasn't the case for older TL-WR741ND revisions).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46238 3c298f89-4303-0410-b956-a3cf2f4a3e73

Backport for the Spansion S25FL164K
It's a 8 MiB flash chip with 4 KiB erase sectors.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46237 3c298f89-4303-0410-b956-a3cf2f4a3e73

This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s3



Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46236 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46235 3c298f89-4303-0410-b956-a3cf2f4a3e73

rocket-m titanium is a device based on ar9344 with 802.11af poe.
It doesn't use the SoC wifi, instead it's using an ar9280 connected to
the pci bus. The gps version of the rocket-m ti is working, but
gps is untested. The gps is connected to the first serial port.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46234 3c298f89-4303-0410-b956-a3cf2f4a3e73

Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.

This fixes #18074.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46233 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46232 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46231 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46230 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46229 3c298f89-4303-0410-b956-a3cf2f4a3e73

This patch enables sysupgrade for the Bitmain Antminer S1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46228 3c298f89-4303-0410-b956-a3cf2f4a3e73

The designated blue WAN port on both devices has index 5, not 1.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46227 3c298f89-4303-0410-b956-a3cf2f4a3e73

NB that wlan5g is phy0tpt and wlan2g phy1tpt.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46226 3c298f89-4303-0410-b956-a3cf2f4a3e73

uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46225 3c298f89-4303-0410-b956-a3cf2f4a3e73

lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46224 3c298f89-4303-0410-b956-a3cf2f4a3e73

u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]

[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a



V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46223 3c298f89-4303-0410-b956-a3cf2f4a3e73

Basically the only error I am seeing is "Correctable Error". Also newer
lantiq PCIe drivers have this message wrapped in a "if debug enabled"
block. So it should be safe to disable this warning.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46222 3c298f89-4303-0410-b956-a3cf2f4a3e73

Newer DSL driver versions depend on the address information.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46221 3c298f89-4303-0410-b956-a3cf2f4a3e73

This is useful if the device also has an ethernet WAN interface with a
separate mac address (that is derived from the LAN mac address).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46220 3c298f89-4303-0410-b956-a3cf2f4a3e73

Make it consistent with the net_device struct and the xrx200 driver

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46219 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46218 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46217 3c298f89-4303-0410-b956-a3cf2f4a3e73

All (still relevant) patches were refresh.
The following patches were dropped because they are applied upstream:
- 0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
- 0005-MIPS-lantiq-add-reset-controller-api-support.patch
- 0006-MIPS-lantiq-reboot-gphy-on-restart.patch
- 0009-MIPS-lantiq-command-line-work-around.patch
- 0010-MIPS-lantiq-export-soc-type.patch
- 0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
- 0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46216 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Konrad Kotowicz <skoti1@go2.pl>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46215 3c298f89-4303-0410-b956-a3cf2f4a3e73

Fix typo in WHR1166D mtd size variable

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46214 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46212 3c298f89-4303-0410-b956-a3cf2f4a3e73

When enabled the dnsmasq DHCP server allocates the IP addresses sequentially
starting from the lowest available IP address.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46211 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46210 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46209 3c298f89-4303-0410-b956-a3cf2f4a3e73

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46208 3c298f89-4303-0410-b956-a3cf2f4a3e73