- Aug 23, 2015
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6 Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46713 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jogo authored
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without generic phy support. Signed-off-by:
-
- Aug 21, 2015
-
-
kaloz authored
a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1). This also clears any bootloader-set FDB defaults. This had caused issues creating port-based VLANs when mappings overlapped previous VLANs. Packets destined to a port not in the default port group flooded all ports. Tested on a 88E6171 (Linksys EA4500) and 88E6172 ('1900AC) Signed-off-by:Claudio Leite <leitec@staticky.com> Signed-off-by:
Imre Kaloz <kaloz@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46699 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
wigyori authored
Signed-off-by:
Zoltan HERPAI <wigyori@uid0.hu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46696 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 17, 2015
-
-
blogic authored
no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by:Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46671 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
The "linux,part-probe" dts parsing is a pretty neat generic feature. It has been posted to kernel.org and could easily be reused by all targets. This change moves the patch to the 3.18 and 4.1 generic folders, and makes the feature available to all platforms who may want to use it. Signed-off-by:
Mathieu Olivari <mathieu@codeaurora.org> Acked-by:
Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46654 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 15, 2015
-
-
hauke authored
In addition to the update this also fixes compile problems with kernel 4.1. This closes #20323. Signed-off-by:
-
- Aug 14, 2015
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.5 Signed-off-by:
-
- Aug 09, 2015
-
-
wigyori authored
Signed-off-by:
-
hauke authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.20 Signed-off-by:
-
- Aug 05, 2015
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4 Signed-off-by:
Daniel Golle <daniel@makrotopia.org> [jogo: fix brcm2708 patches, refresh target patches] Signed-off-by:
-
- Jul 31, 2015
-
-
wigyori authored
Signed-off-by:
-
wigyori authored
Signed-off-by:
-
- Jul 26, 2015
-
-
hauke authored
Signed-off-by:
-
hauke authored
Signed-off-by:
-
- Jul 25, 2015
-
-
hauke authored
This patch was missing for kernel 4.0 and 4.1 in r46464. I also replaced the version in OpenWrt with the version which went upstream into the Linux mainline kernel. This closes #20193 and #20192 Signed-off-by:
-
jogo authored
REGMAP_MMIO is a hidden symbol, so it cannot be directly selected. If nothing selects it, it will fail the build with: ERROR: module '/store/buildbot/slave/slave/rb532/build/build_dir/target-mipsel_mips32_musl-1.1.10/linux-rb532/linux-3.18.19/drivers/base/regmap/regmap-mmio.ko' is missing. make[2]: *** [/store/buildbot/slave/slave/rb532/build/bin/rb532/packages/base/kmod-regmap_3.18.19-1_rb532.ipk] Error 1 Fix this by adding a description to allow selecting it manually. Fixes: r46451 ("kmod-regmap: enable MMIO support") Signed-off-by:
-
- Jul 24, 2015
-
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46482 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
NCM specs are not actually mandating a specific position in the frame for the NDP (Network Datagram Pointer). However, some Huawei devices will ignore our aggregates if it is not placed after the datagrams it points to. Add support for doing just this, in a per-device configurable way. While at it, update NCM subdrivers, disabling this functionality in all of them, except in huawei_cdc_ncm where it is enabled instead. We aren't making any distinction between different Huawei NCM devices, based on what the vendor driver does. Standard NCM devices are left unaffected: if they are compliant, they should be always usable, still stay on the safe side. This change has been tested and working with a Huawei E3131 device (which works regardless of NDP position) and an E3372 device (which mandates NDP to be after indexed datagrams). Signed-off-by:
Enrico Mioso <mrkiko.rs@gmail.com> Signed-off-by:
Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46464 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46463 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Álvaro Fernández Rojas <noltari@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46462 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 22, 2015
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.9 Signed-off-by:
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
- Jul 19, 2015
-
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
- Jul 17, 2015
-
-
blogic authored
Signed-off-by:
-
- Jul 15, 2015
-
-
nbd authored
Add swconfig attributes for flushing the ARL table globally or per port. Signed-off-by:
Heiner Kallweit <hkallweit1@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46382 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
If a link goes down, don't flush the complete ARL table. Only flush the entries for the respective port. Don't touch ARL table if a link goes up. Signed-off-by:
-
nbd authored
Adds functions for flushing ARL table entries per port. Successfully tested on AR8327. Implementation for AR8216/AR8236/AR8316 is based on the AR8236 datasheet and assumes that the three chips share a common ATU register layout. Compile-tested only for AR8216/AR8236/AR8316. Signed-off-by:
-
nbd authored
Adds the chip-specific part of reading ARL table for AR8216/AR8236/AR8316. It's based on the AR8236 datasheet and compile-tested only as I couldn't find datasheets for AR8216/AR8316 and don't own devices with these chips. The existing ar8216_atu_flush implementation was used for all three chip types, therefore I guess they share a common ATU register layout. More testing would be appreciated. Signed-off-by:
-
- Jul 14, 2015
-
-
blogic authored
To improve reproducibility, prevent the inclusion of timestamps in the gzip header. Signed-off-by:
Reiner Herrmann <reiner@reiner-h.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46361 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Fixed typo in the patch provided by Hauke: https://lists.openwrt.org/pipermail/openwrt-devel/2015-July/034274.html Signed-off-by:
-
blogic authored
Signed-off-by:
-
- Jul 12, 2015
-
-
hauke authored
This should fix build of sunxi. Signed-off-by:
-
- Jul 11, 2015
-
-
hauke authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.2 Signed-off-by:
-
hauke authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.0.8 Signed-off-by:
-
hauke authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.18 Signed-off-by:
-
- Jul 08, 2015
-
-
nbd authored
Signed-off-by:
-
nbd authored
Signed-off-by:
-
