- Aug 17, 2015
-
-
blogic authored
The BT Home Hub 5A uses three PEF7071 with PHY ID 0xd565a401. Daniel's PHY driver (for his u-boot sources) already supports that PHY because it uses a PHY ID mask of 0xfffffff8. Signed-off-by:
Martin Blumenstingl <martin.blumenstingl@googlemail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46670 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 14, 2015
-
-
jogo authored
Instead of each target defining it the same, move the KDIR_TMP definition to include/image.mk. In addition Image/Build/SysupgradeNAND already requires KDIR_TMP to be set, so it makes sense to have it globally defined. Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46592 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Aug 05, 2015
-
-
jogo authored
Variables dependend on JFFS2_BLOCKSIZE and NANDBLOCK_SIZE are used for template generation, so need to be present before inclusion of image.mk in target image Makefiles. So move all declarations to before any includes. Fixes: r42878 ("image.mk: clean up and parallelize mkfs calls") Signed-off-by: -
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.4 Signed-off-by:
Daniel Golle <daniel@makrotopia.org> [jogo: fix brcm2708 patches, refresh target patches] Signed-off-by:
-
- Jul 24, 2015
-
-
blogic authored
This ports 9e2a7b77 to the 4.1 patches. I forgot this when preparing the initial 4.1 patch. Signed-off-by:
-
- Jul 22, 2015
-
-
jogo authored
Signed-off-by:
-
- Jul 12, 2015
-
-
hauke authored
Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46308 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 07, 2015
-
-
blogic authored
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V) Signed-off-by:
Jannis Pinter <jannis@pinterjann.is> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46224 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
u-boot support depends on the next "upstream" version ([0]) from Daniel Schwierzeck. Since the installation process is quite complicated a "how to" was added to the wiki: [1] [0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next [1] http://wiki.openwrt.org/toh/bt/homehub_v5a V2: Use the correct PCI interrupt (fixes 2.4GHz wifi) Signed-off-by:
-
blogic authored
Basically the only error I am seeing is "Correctable Error". Also newer lantiq PCIe drivers have this message wrapped in a "if debug enabled" block. So it should be safe to disable this warning. Signed-off-by:
-
blogic authored
Newer DSL driver versions depend on the address information. Signed-off-by:
-
blogic authored
Make it consistent with the net_device struct and the xrx200 driver Signed-off-by:
-
blogic authored
All (still relevant) patches were refresh. The following patches were dropped because they are applied upstream: - 0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch - 0005-MIPS-lantiq-add-reset-controller-api-support.patch - 0006-MIPS-lantiq-reboot-gphy-on-restart.patch - 0009-MIPS-lantiq-command-line-work-around.patch - 0010-MIPS-lantiq-export-soc-type.patch - 0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch - 0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch Signed-off-by:
-
- Jul 01, 2015
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Signed-off-by:
-
- Jun 17, 2015
-
-
jogo authored
Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.15 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.16 Signed-off-by:
-
- Jun 05, 2015
-
-
blogic authored
This fixes the LAN2 LED on Arcadyan VGV7510KW22. git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45899 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45897 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jun 03, 2015
-
-
blogic authored
This also adds the old hardcoded value to the VGV7519BRN profile to make sure that images are still generated correctly. Signed-off-by:
-
- Jun 01, 2015
-
-
jogo authored
In r44391 the kernel partion size was increased to allow larger kernels, but the rootfs partition offset was missed. Fix this by setting the rootfs offset to the expected value. Signed-off-by:
-
- May 30, 2015
-
-
blogic authored
Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45851 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- May 23, 2015
-
-
blogic authored
There are already ifx_pcie_bios_{map_irq,plat_dev_init} hooks defined in ifxmips_pcie.c. Instead of defining a new hook we simply re-use the existing ones (this is basically what the lantiq BSP code does). Signed-off-by: -
blogic authored
The PCIe bus seems to require a hack/workaround when PCI is enabled as well. Unfortunately this is guarded by an CONFIG_IFX_PCI ifdef, which is only defined in lantiq's BSP code. The config symbol for the upstream lantiq PCI driver is CONFIG_PCI_LANTIQ. Signed-off-by:
-
- May 21, 2015
-
-
jogo authored
Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by:
-
- May 03, 2015
-
-
kaloz authored
ramips and lantiq as well. Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@45596 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Mar 27, 2015
-
-
blogic authored
the new buildbot was picking this up as a valid target. Signed-off-by:
-
- Mar 17, 2015
-
-
blogic authored
Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> Signed-off-by:
-
blogic authored
Signed-off-by:
-
- Mar 16, 2015
-
-
blogic authored
Signed-off-by:
-
- Mar 15, 2015
-
-
nbd authored
Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44771 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Signed-off-by:
-
- Mar 11, 2015
-
-
blogic authored
Signed-off-by:
-
blogic authored
danube needs to be added Signed-off-by:
-
blogic authored
Here the device tree entry for ifxhcd is listed as compatible with one supported in dwc2 (after patching the dwc driver appropriately). A second entry is added to support the second core of the hcd. This entry is listed to be compatible with only dwc2. Done this way there should be backwards support for both hcd drivers (ltq-hcd and dwc2) Signed-off-by:
Antti Seppälä <a.seppala@gmail.com> Signed-off-by:
Vincent Pelletier <plr.vincent@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44676 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch switches calls to readl/writel to their dwc2_readl/dwc2_writel equivalents which preserve platform endianness. This patch is necessary to access dwc2 registers correctly on big endian systems such as the mips based SoCs made by Lantiq. Then dwc2 can be used to replace ifx-hcd driver for Lantiq platforms found e.g. in OpenWrt. The patch was autogenerated with the following commands: $EDITOR core.h sed -i "s/\<readl\>/dwc2_readl/g" *.c hcd.h hw.h sed -i "s/\<writel\>/dwc2_writel/g" *.c hcd.h hw.h Signed-off-by:
-
blogic authored
Lantiq driver does not work with autodetected fifo sizes so use ones from original ltq-hcd driver in dwc2. Other values can be autodetected. Signed-off-by:
-
blogic authored
Port gpio code from original ltq-hcd driver to dwc2. Signed-off-by:
-
blogic authored
Add VR9 specific usb initialization bits from ltq-hcd to platform initialization. This patch is more of a proof-of-concept than production quality since the initialization registers are different on other lantiq platforms. Signed-off-by:
-
- Mar 06, 2015
-
-
blogic authored
KERNFS symbol is selected by SYSFS, so place it in generic config. Signed-off-by:
Sergey Ryazanov <ryazanov.s.a@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@44615 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Disable ARCH_NEEDS_CPU_IDLE_COUPLED by-default in generic config, since only one platfrom (omap) needs them. Signed-off-by:
-
blogic authored
CONFIG_MTD_SPLIT_SUPPORT symbol default value is 'y' and many platform specific configs explicitly enables it, while no one platform disables this symbol. So place it in generic config and remove from platform specific configs. Signed-off-by:
-
