- Jul 19, 2015
-
-
nbd authored
Signed-off-by:
Roman Yeryomin <roman@advem.lv> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46426 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
The commit is incomplete, it does not even build the mach-* file This reverts commit 6e6adcf7 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46425 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 18, 2015
-
-
blogic authored
As r46245 disabled the board.bin template workaround, 5GHz wifi stopped working on these devices. This adds them to the calibration data loading introduced in r46244 and thus makes 5GHz work again for these devices. Signed-off-by:
Christian Beier <cb@shoutrlabs.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46415 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Günther Kelleter <guenther.kelleter@devolo.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46414 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 14, 2015
-
-
blogic authored
To improve reproducibility, prevent the inclusion of timestamps in the gzip header. Signed-off-by:
Reiner Herrmann <reiner@reiner-h.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46361 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
- Jul 12, 2015
-
-
hauke authored
Signed-off-by:
Hauke Mehrtens <hauke@hauke-m.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46308 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 09, 2015
-
-
blogic authored
Signed-off-by:
Christian Mehlis <christian@m3hlis.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46284 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
blogic authored
Signed-off-by:
-
blogic authored
In fb6f62e9 several settings are set on the ethernet device, but they are not working. Fix Ethernet by setting the right values. Signed-off-by:
-
blogic authored
no-op since 2.6.35 removed in Kernel 4.1 see https://lwn.net/Articles/380931/ Signed-off-by:
Dirk Neukirchen <dirkneukirchen@web.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46280 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 08, 2015
-
-
blogic authored
r46248 added case statements in the same places Signed-off-by:
John Crispin <blogic@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46274 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Internal GPIO pins are used for PoE passthrough setups in multi-port routers. This patch implemnets control over this hardware feature for Ubiquiti Nanostations and TP-Link CPE510. Signed-off-by:
Lars Kruse <lists@sumpfralle.de> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46271 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
wlan5g is phy0tpt and wlan2g phy1tpt. Signed-off-by:
-
nbd authored
It breaks the build Signed-off-by:
Felix Fietkau <nbd@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46256 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
- Jul 07, 2015
-
-
blogic authored
This patch adds support for the Cisco WAP4410N, an access point that uses the AR9132 SoC. Web upgrades from stock are not yet possible, UART access required for the initial flash. Signed-off-by:
Ryan A Young <rayoung@utexas.edu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46250 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Based on trunk r46212. Signed-off-by:
Jaehoon You <teslamint@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46248 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Currently one board uses the "proper" way of providing firmware with the name ath10k/cal-pci-<pci address>.bin, whereas other boards patch board.bin template in preinit and rely on a custom ath10k patch to use calibration data from the template. This patch makes all boards use the first method. Signed-off-by:
Matti Laakso <malaakso@elisanet.fi> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46244 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Sven Eckelmann <sven@open-mesh.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46241 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
-
blogic authored
This device is identical to the TL-WR740N v5, it even uses the same HWID (which wasn't the case for older TL-WR741ND revisions). Signed-off-by:
Matthias Schiffer <mschiffer@universe-factory.net> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46238 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner http://wiki.openwrt.org/toh/bitmain/s3 Signed-off-by:
L. D. Pinney <ldpinney@gmail.com> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46236 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
Signed-off-by:
Alexander Couzens <lynxis@fe80.eu> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46235 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
blogic authored
rocket-m titanium is a device based on ar9344 with 802.11af poe. It doesn't use the SoC wifi, instead it's using an ar9280 connected to the pci bus. The gps version of the rocket-m ti is working, but gps is untested. The gps is connected to the first serial port. Signed-off-by:
-
blogic authored
This patch enables sysupgrade for the Bitmain Antminer S1 Signed-off-by:
-
blogic authored
The designated blue WAN port on both devices has index 5, not 1. Signed-off-by:
-
blogic authored
NB that wlan5g is phy0tpt and wlan2g phy1tpt. Signed-off-by:
-
nbd authored
Signed-off-by:
Miaoqing Pan <miaoqing@codeaurora.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46208 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
nbd authored
Patch cherry-picked from the following location: https://www.codeaurora.org/cgit/quic/qsdk/oss/system/openwrt/commit/?h=release/coconut_ioe4531_2.0&id=5c357bf6c763e4140dddcc9a3bc5f005525a9c0e Changelist, - add more register defines - add EHCI support - fix GPIO pin count to 18 - fix chained irq disabled - fix GMAC0/GMAC1 initial - fix WMAC irq number to 47 - merge the changes of dev-eth.c from the patch to file. Signed-off-by:
-
nbd authored
ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531) The initialization routines for these boards were relying on some (wrong) defaults for the QCA953x ethernet. Make these defaults explicit to prevent breaking them when the QCA953x defaults are fixed. Signed-off-by:
-
- Jul 06, 2015
-
-
nbd authored
r45954 ("ar71xx: fix 100/10mbps ethernet link issues on mynet range extender") introduced a pdata based modification of the tx_clk_dly. But it was not checked if pdata actually existed. This caused a page fault on all devices which didn't have at803x_platform_data specified for an at803x based device. Signed-off-by: -
nbd authored
Update firmware name and md5sum. MAC-address location remains unchanged from previous version. Signed-off-by:
-
nbd authored
- it should be BOARDNAME instead of BOARD_NAME - kernel partition should be padded to 1536k (somehow this padding was lost in translation to BuildCode in bc797c73) Signed-off-by:
-
- Jul 05, 2015
-
-
jogo authored
Signed-off-by:
Jonas Gorski <jogo@openwrt.org> git-svn-id: svn://svn.openwrt.org/openwrt/trunk@46191 3c298f89-4303-0410-b956-a3cf2f4a3e73
-
jogo authored
EPG5000 uses ath79 nvram functions, but does not select it. This breaks build if no other board support enabling nvram support is selected. Closes #19952. Signed-off-by:
-
- Jul 03, 2015
-
-
jogo authored
r46161 updated headers also touched by it, so it needed to be refreshed as well. Closes #20033. Signed-off-by:
-
- Jul 01, 2015
-
-
jogo authored
Changelog: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.17 Signed-off-by:
-
